1988 Autocar ACL Belts and Hoses
Find Your Specific 1988 Autocar ACL Belts and Hoses
Below you will find various in-demand Autocar Belts and Hoses, components and accessories for your 1988 ACL. Advance Auto Parts has popular ACL parts like Serpentine and V Belts, Engine Cooling Hoses, Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other ACL model years. Select a category of 1988 Autocar ACL Belts and Hoses below and start saving instantly.
Popular 1988 Autocar ACL Belts and Hoses Categories
Essential Belts and Hoses for 1988 Autocar ACLs
Dayco – Bottom Cog V-Belt; 60.5 Inch Long, Exact Fit Premium Quality (Part No.17605)
from
$22.79
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9605HD)
from
$38.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Crack, wear, oil, and heat resistant construction
- The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
- Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
- Troubleshooter for troubled drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA oil and heat resistance standards and static conductivity requirements
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22648)
from
$55.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand attached V-belts
Dayco – V-Belt, Top Cog, Dayco (Part No.22645)
from
$21.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9365HD)
from
$41.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Proprietary material provides maximum performance at extremely long operating temperatures
- Crack, wear, oil, and heat resistant construction
- Special compound provides unmatched stability, load carrying capacity and belt life
- Unique notch pattern offers greater flexibility for smaller diameter pulleys
- Troubleshooter for troubled drives
- Designed to save your fleet’s money and reduce downtime
- Meets RMA oil and heat resistance standards and static conductivity requirements
Dayco – Straight Radiator Hoses; EPDM Rubber, 1 1/4 Inch Inner Diameter (sold by inch) (Part No.76125)
from
$0.99
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy-duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements.
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/2 Inch Inner Diameter (sold by inch) (Part No.76250)
from
$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Gates – Premium Molded Coolant Hose (Part No.21042)
from
$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to withstand electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Green Stripe 2-Ply Straight Coolant Hose (Sold by foot) (Part No.24220)
from
$1.99
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Cover marked in 1-inch increments to facilitate approximate cutting lengths, allows for “bespoke” installations.
- Designed with compounds that resist electrochemical degradation
- Approved for marine applications.
- Exceeds SAE 20R1 Type EC (Class D-1 Tube, and Cover, Standard Wall)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance-free connection, use PowerGrip SB clamps
- Caution: Do not use for fuel or oil transportation applications.
- PLEASE NOTE: Item is priced and sold by the inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (sold by foot) (Part No.77300GL)
from
$2.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Gates – Micro-V Serpentine Drive Belt (Part No.K050350)
from
$23.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080585HD)
from
$75.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty coil belts on the market
- Designed to save your fleet money and reduce downtime
- It is recommended to replace the tensioner (if equipped)
Gates – Micro-V Serpentine Drive Belt (Part No.K080585)
from
$60.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all OEM specifications
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – Micro-V Serpentine Drive Belt (Part No.K080620)
from
$73.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Serpentine Belts By Gates
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all OEM specifications
- It is recommended to replace the tensioner (if equipped)
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080620HD)
from
$91.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Crack and wear resistant construction, even in extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Upgrade your 1988 Autocar ACL with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1988 Autocar ACL, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Autocar or enhancing its overall performance, Belts and Hoses are key to keeping your ACL functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Belts and Hoses for the 1988 Autocar ACL, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Engine Cooling Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1988 Autocar ACL at great prices.
Our Belts and Hoses inventory for this model
ranges from just $0.99 to $91.99, with
an average price of $36.14.
Our 19 Belts and Hoses in stock come from 2 trusted brands, so you’re sure to find the right part for your 1988 Autocar ACL without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1988 Autocar ACL is always ready to roll. We’re committed to providing you with everything you need to keep your ACL in top shape, all in one place.
Start shopping confidently below for your 1988 Autocar ACL!
Best-Selling Serpentine and V Belts for 1988 Autocar ACLs
Enhance the driving experience in your Autocar with 13 quality Serpentine and V Belt components, starting at $21.99.
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080585HD)
from
$75.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty coil belts on the market
- Designed to save your fleet money and reduce downtime
- It is recommended to replace the tensioner (if equipped)
Gates – Micro-V Serpentine Drive Belt (Part No.K080620)
from
$73.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Serpentine Belts By Gates
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all OEM specifications
- It is recommended to replace the tensioner (if equipped)
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22648)
from
$55.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand attached V-belts
Dayco – V-Belt, Top Cog, Dayco (Part No.22645)
from
$21.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080620HD)
from
$91.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Crack and wear resistant construction, even in extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9605HD)
from
$38.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Crack, wear, oil, and heat resistant construction
- The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
- Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
- Troubleshooter for troubled drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA oil and heat resistance standards and static conductivity requirements
Dayco – Bottom Cog V-Belt; 60.5 Inch Long, Exact Fit Premium Quality (Part No.17605)
from
$22.79
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – Micro-V Serpentine Drive Belt (Part No.K050350)
from
$23.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – Automotive XL High Capacity V-Belt (Part No.9605)
from
$34.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
- Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
- Resistant to oil, heat, ozone, weathering, and aging for better belt life.
- Meets or exceeds SAE J636C specifications
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22664)
from
$65.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes are available as Gates PowerBand V-Belts
Gates – Micro-V Serpentine Drive Belt (Part No.K080585)
from
$60.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all OEM specifications
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9365HD)
from
$41.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Proprietary material provides maximum performance at extremely long operating temperatures
- Crack, wear, oil, and heat resistant construction
- Special compound provides unmatched stability, load carrying capacity and belt life
- Unique notch pattern offers greater flexibility for smaller diameter pulleys
- Troubleshooter for troubled drives
- Designed to save your fleet’s money and reduce downtime
- Meets RMA oil and heat resistance standards and static conductivity requirements
Dayco – V-Belt, Top Cog, Dayco (Part No.22665)
from
$21.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Most Popular 1988 Autocar ACL Engine Cooling Hoses
Customize your Autocar with 4 Engine Cooling Hoses products
like Upper Radiator Hoses, all
priced under $42.99.
Dayco – Straight Radiator Hoses; EPDM Rubber, 1 1/4 Inch Inner Diameter (sold by inch) (Part No.76125)
from
$0.99
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy-duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements.
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
Gates – Premium Molded Coolant Hose (Part No.21042)
from
$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to withstand electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Green Stripe 2-Ply Straight Coolant Hose (Sold by foot) (Part No.24220)
from
$1.99
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Cover marked in 1-inch increments to facilitate approximate cutting lengths, allows for “bespoke” installations.
- Designed with compounds that resist electrochemical degradation
- Approved for marine applications.
- Exceeds SAE 20R1 Type EC (Class D-1 Tube, and Cover, Standard Wall)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance-free connection, use PowerGrip SB clamps
- Caution: Do not use for fuel or oil transportation applications.
- PLEASE NOTE: Item is priced and sold by the inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/2 Inch Inner Diameter (sold by inch) (Part No.76250)
from
$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Top Picks for 1988 Autocar ACL Radiator Hoses
Upgrade Autocar ACLs with top-quality Radiator Hoses parts, including 1 OEM and aftermarket selections for your 1988 model.
Gates – Green Stripe Heavy-Duty Straight Heater Hose (Sold by foot) (Part No.28441)
from
$4.79
Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.
Product Features:
See More
Product Features:
- Green strip construction offers the best cost per mile
- Abrasion resistant cover
- Engineered with materials to resist electrochemical degradation
- Reduces water loss from water permeating the hose wall and cover
- Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Note: For a maintenance-free connection, use PowerGrip SB clamps
- Caution: Do not use for fuel or oil transportation applications.
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
In-Demand Heater Hoses for 1988 Autocar ACLs
Select from 1 premium Heater Hoses parts for your 1988 Autocar ACL.
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (sold by foot) (Part No.77300GL)
from
$2.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
FAQs for 1988 Autocar ACL Belts and Hoses
Which Belts and Hoses are best-sellers for 1988 Autocar ACLs?
Out of 19 Belts and Hoses that fit 1988 Autocar ACLs, the following parts are the top sellers:
- Straight Radiator Hoses; EPDM Rubber, 1 1/4 Inch Inner Diameter (sold by inch) (10628459) – $0.99
- FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (10496988) – $75.99
- Green Stripe Truck & Bus Series V-Belt (10914012) – $55.99
What’s the price range for 1988 Autocar ACL Belts and Hoses?
Belts and Hose prices for the 1988 Autocar ACL start at $0.99 and go up to $91.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1988 Autocar ACL?
The average price for Belts and Hoses for the 1988 Autocar ACL is $36.14. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Belts and Hoses for my 1988 Autocar ACL?
The cheapest 1988 Autocar ACL Belts and Hoses we carry in stock are:
- Straight Radiator Hoses; EPDM Rubber, 1 1/4 Inch Inner Diameter (sold by inch) (10628459) – $0.99
- Straight Radiator Hoses; EPDM Rubber, 2 1/2 Inch Inner Diameter (sold by inch) (10628460) – $1.79
- Green Stripe 2-Ply Straight Coolant Hose (Sold by foot) (10521076) – $1.99
- Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (sold by foot) (20590259) – $2.99
- Green Stripe Heavy-Duty Straight Heater Hose (Sold by foot) (10504904) – $4.79
What types of Belts and Hoses do you sell for my 1988 Autocar ACL?
As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1988 Autocar ACL:
Can I get help with 1988 Autocar ACL Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Autocar Belts and Hoses and more.
What is your return policy for Autocar ACL Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Autocar ACL Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
