1987 Toyota Pickup Drive Shafts and Axles

Essential 1987 Toyota Pickup Drive Shafts and Axles

Dorman – Driveshaft Center Support Bearing (Part No.934-710)

Driveshaft Center Support Bearing

from

$137.99
This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
  • Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8470)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$65.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 79-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1979-1988
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 2.75 INCH / 70 MM
  • MOUNT WIDTH: 9.50 INCH / 241 MM
See More

Yukon Gear – 1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface (Part No.30220)

1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface

from

$65.99
1177, 7.5″, 8″, V6 Toyota REDI sleeve, saver for seal surface.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Toyota 7.5″, 8″ and V6
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9915)

Front Drive Shaft: Not Greasable, Direct Replacement

from

$716.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Rear Drive Shaft: OE Fix (Part No.936-536)

Rear Drive Shaft: OE Fix

from

$746.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly
  • Rear Drive Shaft: OE Fix
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Yukon Gear – Axle Bearing Puller Tool (Part No.56065)

Axle Bearing Puller Tool

from

$529.99
Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.

Product Features:
  • Axle bearing puller
  • Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
  • Works on Toyota rear applications
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Inner Stub Shaft Bearing For Toyota 7.5" IFS (Part No.18061)

Inner Stub Shaft Bearing For Toyota 7.5" IFS

from

$172.99
Product Features:
  • Inner stub shaft bearing
  • Fits Toyota 7.5″ IFS
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear (Part No.10044)

Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear

from

$294.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (inner and outer seals) for Toyota 7.5″, 8″, and V6 rear. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Toyota 7.5″, 8″ and V6 rear
  • Includes axle bearing, inner and outer axle seals and snap ring
  • This kit will not work with ABS applications
  • Services one side
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69073)

CV Axle Shaft Assembly

from

$132.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Autopart International Inc – Axle Assembly (Part No.K40001952752API)

Axle Assembly

from

$138.08
Axle Assembly

Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)

7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip

from

$10.99
Product Features:
  • Rear axle bearing snap ring for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)

Yoke For Toyota 7.5" IFS (And '85 And Newer Rear) With 23 Spline Pinion

from

$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 7.5″
  • 23 spline
See More

Yukon Gear – Outer Axle Seal For Toyota 7.5", 8" & V6 Rear (Part No.30012)

Outer Axle Seal For Toyota 7.5", 8" & V6 Rear

from

$42.99
Outside axle seal for 7.5″, 8″ and V6 Toyota rear.Yukon Mighty seal.

Product Features:
  • Rear outer axle seal
  • Fits Toyota 7.5″, 8″ with 4 cylinder engine, and V6
See More

NOK – Axle Seal (Part No.K402148816NOK)

Axle Seal

from

$7.22
NOK is Japan’s longest established oil seal manufacturer. Our functional parts such as oil seals and mechanical seals, created through advanced seal technology, are not only employed in the automotive industry but are also used in a wide range of other industries.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Yukon Gear – 8" Front Straight Axle Inner Seal & Some Land Cruiser (Part No.30325)

8" Front Straight Axle Inner Seal & Some Land Cruiser

from

$21.99
8″ front straight axle inner seal & some Land Cruiser (fits inside knuckl.Yukon Mighty seal.

Product Features:
  • Inner axle seal
  • Fits Toyota 8″ front
See More

Yukon Gear – Toyota 8" Front Straight Axle Heavy Duty Inner Seal (Part No.30343)

Toyota 8" Front Straight Axle Heavy Duty Inner Seal

from

$22.99
Toyota 8″ front straight axle heavy duty inner seal.

Product Features:
  • Front inner axle seal
  • Fits Toyota 8″ with 4 cylinder engine
  • Extra heavy duty design
See More

National – Multi Purpose Seal (Part No.223253)

Multi Purpose Seal

from

$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)

Toyota Bearing Retainer For '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

from

$22.99
Product Features:
  • Bearing retainer
  • Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
See More

1987 Toyota Pickup Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1987 Toyota Pickup. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 29 different Drive Shafts and Axles in our inventory ranging from $10.99 to $1,039.99. That means you can find the exact parts or products you need to keep that 1987 Toyota Pickup running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Toyota Pickup. National, Carquest Premium, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1987 Toyota Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1987 Toyota Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1987 Toyota Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Toyota Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Pickup the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Carquest Premium Drive Shafts and Axles

We carry Carquest Premium parts in our stock across Drive Shaft and Axles categories, plus more. For a 1987 Toyota Pickup, our most popular Carquest Premium Drive Shafts and Axles include:
CV Axle Shaft Assembly
from $132.99
(14)
CV Axle Shaft Assembly
Drive Shaft and Axles

Top 1987 Toyota Pickup Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1987 Toyota Pickup. Popular National parts include:
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings
Shaft Repair Sleeve
from $41.49
(2)
Shaft Repair Sleeve
Drive Shaft Seals

FAQs for 1987 Toyota Pickup Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1987 Toyota Pickup?

Out of 29 Drive Shafts and Axles for the 1987 Toyota Pickup, the most popular in our inventory are:
Inner Axle Seal For 7.5", 8" And V6 Toyota Rear
from $23.99
This product is not rated
Inner Axle Seal For 7.5", 8" And V6 Toyota Rear
Axle Shaft Seals
7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip
from $10.99
This product is not rated
7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip
Axle Shaft Seal Retainers
Outer Axle Seal For Toyota 7.5", 8" & V6 Rear
from $42.99
This product is not rated
Outer Axle Seal For Toyota 7.5", 8" & V6 Rear
Axle Shaft Seals