1987 Sterling 825 Belts and Hoses

Essential Belts and Hoses for 1987 Sterling 825s

Bando – Multi Rib (Serpentine) Belt (Part No.W100027638BAN)

Multi Rib (Serpentine) Belt

from

$15.10
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dayco – Bottom Cog V-Belt; 41.75 Inch Long, Exact Fit Premium Quality (Part No.15418)

Bottom Cog V-Belt; 41.75 Inch Long, Exact Fit Premium Quality

from

$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  • Provides greater durability and flexibility 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  • Resists heat, oil and grease
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.80401)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count (Part No.5040358)

Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count

from

$24.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K040360)

Micro-V« Serpentine Drive Belt

from

$28.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K030425)

Micro-V« Serpentine Drive Belt

from

$12.79
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count (Part No.358K4)

Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count

from

$15.79
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

Upgrade your 1987 Sterling 825 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1987 Sterling 825, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Sterling or enhancing its overall performance, Belts and Hoses are key to keeping your 825 functioning at its best. At Advance Auto Parts, we offer a wide selection of 8 Belts and Hoses for the 1987 Sterling 825, designed to meet your needs without breaking the bank. From Heater Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1987 Sterling 825 at great prices. Our Belts and Hoses inventory for this model ranges from just $12.79 to $28.99, with an average price of $18.72. Our 8 Belts and Hoses in stock come from 4 trusted brands, so you’re sure to find the right part for your 1987 Sterling 825 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Sterling 825, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, and more. Dayco Belts and Hoses start at just $15.49 and boast an impressive 5 stars average rating from customers. With 328 customer reviews and counting, our 1987 Sterling 825 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 Sterling 825 is always ready to roll. We’re committed to providing you with everything you need to keep your 825 in top shape, all in one place. Start shopping confidently below for your 1987 Sterling 825!

Best-Selling Heater Hoses for 1987 Sterling 825s

Enhance the driving experience in your Sterling with 2 quality Heater Hose components, starting at $18.29.

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.80401)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Most Popular 1987 Sterling 825 Serpentine and V Belts

Customize your Sterling with 6 Serpentine and V Belts products like Serpentine Belts and V-Belts, all priced under $28.99.

Dayco – Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count (Part No.5040358)

Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count

from

$24.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count (Part No.358K4)

Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count

from

$15.79
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

Dayco – Bottom Cog V-Belt; 41.75 Inch Long, Exact Fit Premium Quality (Part No.15418)

Bottom Cog V-Belt; 41.75 Inch Long, Exact Fit Premium Quality

from

$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  • Provides greater durability and flexibility 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  • Resists heat, oil and grease
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K040360)

Micro-V« Serpentine Drive Belt

from

$28.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100027638BAN)

Multi Rib (Serpentine) Belt

from

$15.10
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K030425)

Micro-V« Serpentine Drive Belt

from

$12.79
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Top-Rated Belts and Hoses Brands For Your 1987 Sterling 825

Shop for the best-rated brands offering Belts and Hoses and other products for your 1987 Sterling 825s. Below you’ll find some of our best rated Belts and Hoses from Dayco, and more. Belts and Hoses from these brands that fit a 1987 825 start at just $15.49 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1987 Sterling 825 Belts and Hoses

When it comes to maintaining or upgrading your 1987 Sterling 825, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1987 Sterling 825. With over 4 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.49, with an average price of just $19.27. Plus, with over 41 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length
from
$18.29

(27)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length

“You have to cut to fit, but Advance Auto Parts usually saves my behind when no one else in town carries these molded hoses.”

Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count
from
$24.99

(4)

Poly Rib Belt Serpentine Belt; 35.83 Long, 4 Rib Count

“Perfect fit and price”

Bottom Cog V-Belt; 41.75 Inch Long, Exact Fit Premium Quality
from
$15.49
This product is not rated

Bottom Cog V-Belt; 41.75 Inch Long, Exact Fit Premium Quality

“”

FAQs for 1987 Sterling 825 Belts and Hoses

Which Belts and Hoses are best-sellers for 1987 Sterling 825s?

Out of 8 Belts and Hoses that fit 1987 Sterling 825s, the following parts are the top sellers:

What’s the price range for 1987 Sterling 825 Belts and Hoses?

Belts and Hose prices for the 1987 Sterling 825 start at $12.79 and go up to $28.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1987 Sterling 825?

The average price for Belts and Hoses for the 1987 Sterling 825 is $18.72. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Sterling 825 model years?

Yes, we currently carry Belts and Hoses for 1 model years of Sterling 825s between 1988 and 1988. Belts and Hoses are bought most frequently for the following model years: 1988.

What are the cheapest Belts and Hoses for my 1987 Sterling 825?

The cheapest 1987 Sterling 825 Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 1987 Sterling 825?

Out of 328 reviews by customers, our 1987 Sterling 825 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1987 Sterling 825 and their top-rated products:

What types of Belts and Hoses do you sell for my 1987 Sterling 825?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1987 Sterling 825:

Can I get help with 1987 Sterling 825 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Sterling Belts and Hoses and more.

What is your return policy for Sterling 825 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Sterling 825 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.