1987 Pontiac Bonneville Suspension Parts
More 1987 Pontiac Bonneville Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1987 Pontiac Bonneville, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1987 Pontiac Bonneville Suspension Parts
Dorman – Air Suspension Conversion Kit, Rear (Part No.949-555)
from
$509.99
Failed air suspension too costly to repair? This partial air-to-coil spring conversion kit replaces failed front air springs with conventional steel springs. Cost-effectively restore a smooth ride by only replacing the parts necessary.
Product Features:
See More
Product Features:
- Alternative replacement – this air suspension delete kit replaces the original front air springs with conventional coil springs
- Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
- Thoroughly tested – parts underwent ride handling testing to ensure performance
- Tech note – includes all necessary hardware and components needed to convert front suspension; full 4-corner kit required to eliminate warning light
ACDelco – Gray Multi-Purpose Pigtail (Part No.PT3923)
from
$46.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Monroe – Gas-Matic Strut (Part No.81798)
from
$53.99
Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Gauge/Air Line (Part No.2158)
from
$551.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.
Product Features:
See More
Product Features:
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Single Point Fill (Both Air Springs Fill To The Same Pressure)
- Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
Suncore – Complete Strut Assem (Part No.55S11420)
from
$154.99
Complete Strut Assem
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Suncore – Quick Strut Kit (Part No.2-55S11420-001)
from
$299.99
Quick Strut Kit
KYB – Bellows Bump Stop Kit (Part No.L303734953KYB)
from
$28.01
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
- KYB Bump Stop Kits suit a variety of vehicle applications
- KYB Bump Stop Kits perfectly compliment KYB Struts
MOOG – Strut Mounting Bearing (Part No.K6436)
from
$42.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- High polish chrome steel bearing races
- Restores like-new steering and handling
- Superior rubber to steel bonding for durability
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Control Arm Bushing Kit (Part No.K6176)
from
$37.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Metal rib design helps lock the inner tube within frame pocket
- Metal surfaces are phosphate coated for corrosion protection
Rare Parts – Control Arm Bushing (Part No.RP16739)
from
$104.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
KYB – Strut Mount Kit (Part No.SM5281)
from
$82.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Rare Parts – STRUT PLATE W/O BRG (Part No.RP53212)
from
$104.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restore Strut pivot ability.
MOOG – Control Arm (Part No.RK641464)
from
$92.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Rare Parts – Control Arm (Part No.RP12953)
from
$165.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
MOOG – Strut Bellows (Part No.K90460)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
KYB – Jounce Bumper and Bellows (Part No.SB104)
from
$23.79
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
KYB – Strut Mount Bearing (Part No.SM5284)
from
$20.49
KYB strut mount bearings optimize suspension performance by offering OE quality replacement components designed for each application. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB bearings have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Bearing Available
- Provides Smoother Steering And Helps Retain Front End Alignment
- Built With Design And Quality That Matches Or Exceeds One
Rare Parts – Strut Mount (Part No.RP18375)
from
$182.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
Dorman – OE Solutions Air Compressor, Active Suspension (Part No.L7015720808DOR)
from
$509.61
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Suspension Compressor eliminates excessive suspension sag, restoring vehicle handling and safety. It is available as a complete assembly with all new components, including the motor and dryer. Since this part is a direct replacement, the exact fit adds an additional level of convenience.
Product Features:
See More
Product Features:
- Integral to a level ride – replacement restores active suspension function
- A hassle-free repair – no need to rebuild rusty components
- Plug and play for ease of installation
- Resistant to corrosion
Dorman – Suspension Air Compressor, With Wire Set And Mounting Hardware (Part No.949-015)
from
$381.99
This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
- Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
- Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
- Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5955)
from
$37.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Complete Strut Assembly: Includes Strut and Mount (Part No.171798)
from
$118.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA – Each Quick-Strut assembly is assembled with pride in Paragould, Arkansas
Monroe – Strut-Mate Strut Mounting Kit (Part No.901953)
from
$33.49
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Monroe – Strut-Mate Strut Mounting Kit (Part No.902998)
from
$43.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
MOOG – Strut Bellows (Part No.K90464)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Strut-Mate Strut Boot Kit (Part No.63622)
from
$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Driveworks – Strut Bellow (Part No.DW-K90463)
from
$7.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
Popular 1987 Pontiac Bonneville Suspension Parts Categories
1987 Pontiac Bonneville Suspension Parts
You count on your 1987 Pontiac Bonneville to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 54 Suspension Parts ranging in price from $7.99 to $1,217.99, you’re sure to find everything you need for your 1987 Pontiac Bonneville.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 12 different brands like Monroe, Moog, and DriveWorks. 1987 Pontiac Bonneville Suspension Parts start as low as $7.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 186 extensive product reviews on 1987 Pontiac Bonneville Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut-Mate Strut Boot Kit with 4.6 stars and Jounce Bumper and Bellows with 3.3 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1987 Pontiac Bonneville below to get started!
Top-Rated Suspension Parts Brands For Your 1987 Pontiac Bonneville
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Pontiac Bonneville running right for years to come. In our inventory you’ll find brands like Monroe, Moog, DriveWorks, and even more.
Popular Driveworks Suspension Parts
You’ll find popular Driveworks brand products across Shocks and Struts. All are waiting to get your 1987 Pontiac Bonneville back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1987 Pontiac Bonneville, and some of our most reviewed Monroe parts include:
FAQs for 1987 Pontiac Bonneville Suspension Parts
What are the most purchased Suspension Parts for the 1987 Pontiac Bonneville?
Out of 54 Suspension Parts for the 1987 Pontiac Bonneville, the most popular in our inventory are:
What are the top-rated 1987 Pontiac Bonneville Suspension Parts?
Top-rated Suspension Parts for your 1987 Pontiac Bonneville based on customer reviews/ratings are:
from
$27.99
(5)
Strut-Mate Strut Boot Kit
“A Little different than the OEM part but worked just fine. American Made always a PLUS.”
from
$23.79
(3)
Jounce Bumper and Bellows
“the KYB dirt cover and rebound bumper fit as advertised. the quality looks to be good. what more can i say right now?”
from
$33.49
(2)
Strut-Mate Strut Mounting Kit
“Product did not come with directions on proper assembly”
