1987 Merkur XR4TI Brake Parts

Essential 1987 Merkur XR4TI Brake Parts

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37660)

Drum Brake Wheel Cylinder

from

$21.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15039)

Disc Brake Caliper Repair Kit

from

$6.79
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8200)

Disc Brake Hardware Pin Boot Kit

from

$13.69
This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Oversized Brake Caliper Bolt

from

$25.49
This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
  • Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-73188)

Vacuum Brake Booster: Without Master Cylinder

from

$132.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2195)

Vacuum Brake Booster: Without Master Cylinder

from

$99.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13308)

Disc Brake Hardware Kit

from

$14.49
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

1987 Merkur XR4TI Brake Parts

You count on your 1987 Merkur XR4TI to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 10 Brake Parts ranging in price from $6.79 to $132.99, you’re sure to find everything you need for your 1987 Merkur XR4TI.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 6 different brands like Carquest, Cardone, and Dorman. 1987 Merkur XR4TI Brake Parts start as low as $6.79!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 98 extensive product reviews on 1987 Merkur XR4TI Brake Parts.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1987 Merkur XR4TI below to get started!

Top-Rated Brake Parts Brands For Your 1987 Merkur XR4TI

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Merkur XR4TI running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Dorman, and even more.

Popular Carquest Wearever Brake Parts

You’ll find popular Carquest Wearever brand products across Brake Kits. All are waiting to get your 1987 Merkur XR4TI back on the road. Some of the top-rated Carquest Wearever products in these categories are:
Disc Brake Caliper Repair Kit
from $6.79
(1)
Disc Brake Caliper Repair Kit
Brake Caliper Kits
Disc Brake Caliper Guide Pin Boot Kit
from $15.29
(2)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits
Disc Brake Caliper Guide Pin Kit
from $7.49
(35)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins

Top-Rated Brake Parts


If are what you’re looking for, our inventory holds plenty. We stock brand Brake Parts for your 1987 Merkur XR4TI, and some of our most reviewed parts include:
Drum Brake Wheel Cylinder
from $21.99
(10)
Drum Brake Wheel Cylinder
Brake Wheel Cylinders

FAQs for 1987 Merkur XR4TI Brake Parts

What are the most purchased Brake Parts for the 1987 Merkur XR4TI?

Out of 10 Brake Parts for the 1987 Merkur XR4TI, the most popular in our inventory are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders
Oversized Brake Caliper Bolt
from $25.49
(40)
Oversized Brake Caliper Bolt
Brake Caliper Bolt and Pins
Caliper Guide Pin
from $10.79
This product is not rated
Caliper Guide Pin
Brake Caliper Guide Pin Bolts