1987 Mercury Sable Belts and Hoses
Find Your Specific 1987 Mercury Sable Belts and Hoses
Below you will find various in-demand Mercury Belts and Hoses, components and accessories for your 1987 Sable. Advance Auto Parts has popular Sable parts like Heater Hoses, Radiator Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other Sable model years including
1993,
1994,
1995,
1996,
1997,
1998,
1999,
2008,
2009 and more. Select a category of 1987 Mercury Sable Belts and Hoses below and start saving instantly.
Popular 1987 Mercury Sable Belts and Hoses Categories
Essential Belts and Hoses for 1987 Mercury Sables
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Dayco – Idler Pulley, Dayco (Part No.89016)
from
$26.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38023)
from
$32.99
Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.
Product Features:
See More
Product Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
- Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation in severe conditions
Dayco – Idler Pulley, Dayco (Part No.89007)
from
$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Driveworks – V-Ribbed Belt, Driveworks (Part No.675K6)
from
$29.99
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
Driveworks – V-Ribbed Belt, Driveworks (Part No.1105K6)
from
$29.49
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
Dayco – Poly Rib Belt Serpentine Belt; 67.52 Long, 6 Rib Count (Part No.5060675)
from
$38.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
- Made in the USA
Dayco – Poly Rib Belt Serpentine Belt; 42 Long, 5 Rib Count (Part No.5050420)
from
$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Gates – Micro-V Serpentine Drive Belt (Part No.K061010)
from
$54.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all original equipment manufacturer specifications.
- Replacement of the tensioner is recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Dayco – Poly Rib Belt Serpentine Belt; 95.5 Long, 6 Rib Count (Part No.5060955)
from
$71.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (Part No.E71167)
from
$33.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.25" Long, 1.50" Diameter (Part No.D70885)
from
$16.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25305)
from
$23.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Warning: Do not use for fuel or oil transfer applications
CARQUEST – Premium Molded Coolant Hose (Part No.21026)
from
$33.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24.5" Long, 1.50" Diameter (Part No.E72488)
from
$69.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Flex Radiator Hoses; EPDM Rubber, 15.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81161)
from
$26.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.25" Long, 1.50" Diameter (Part No.C71302)
from
$15.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25477)
from
$17.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- Their great flexibility makes installation easy
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.80401)
from
$18.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Gates – ThermalPro Premium Molded Coolant Hose (Part No.21738)
from
$21.29
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; knitted synthetic fiber reinforcement; EPDM lid resistant to heat, ozone and chemical refrigerants
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)
from
$1.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.75" Long, .63" Diameter (Part No.B71414)
from
$10.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length (Part No.80411)
from
$7.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Gates – Premium Molded Coolant Hose (Part No.20338)
from
$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 Inch Length (Part No.87618)
from
$21.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 15 Inch Length (Part No.88351)
from
$25.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Premium Molded Heater Hose (Part No.18739)
from
$32.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- It has all the quality features of Gates molded coolant hose and is similar to OEM specifications
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature range: -40 Deg. F to +275 Deg. F (-40 Deg. F (+135 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Upgrade your 1987 Mercury Sable with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1987 Mercury Sable, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Belts and Hoses are key to keeping your Sable functioning at its best. At Advance Auto Parts, we offer a wide selection of 29 Belts and Hoses for the 1987 Mercury Sable, designed to meet your needs without breaking the bank.
From
Heater Hose
replacements to
Radiator Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1987 Mercury Sable at great prices.
Our Belts and Hoses inventory for this model
ranges from just $9.79 to $59.99, with
an average price of $27.34.
Our 29 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 1987 Mercury Sable without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Mercury Sable, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco DriveWorks, and more.
Dayco Belts and Hoses
start at just $33.99 and boast an impressive 4.5 stars average rating from customers.
With 550 customer reviews and counting, our 1987 Mercury Sable Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1987 Mercury Sable is always ready to roll. We’re committed to providing you with everything you need to keep your Sable in top shape, all in one place.
Start shopping confidently below for your 1987 Mercury Sable!
Best-Selling Heater Hoses for 1987 Mercury Sables
Enhance the driving experience in your Mercury with 2 quality Heater Hose components, starting at $9.79.
Dayco – Curved Radiator Hoses; EPDM Rubber, Standard Duty, 6 Inch Long, Exact Fit (Part No.A71433)
from
$25.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.20338)
from
$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Most Popular 1987 Mercury Sable Radiator Hoses
Customize your Mercury with 6 Radiator Hoses products
like Coolant Hoses and
By-Pass Hoses, all
priced under $33.99.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (Part No.E71167)
from
$33.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)
from
$19.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.25" Long, 1.50" Diameter (Part No.D70885)
from
$16.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9" Long, .78" Diameter (Part No.B70773)
from
$22.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
CARQUEST – Premium Molded Coolant Hose (Part No.21026)
from
$33.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – ThermalPro Premium Molded Coolant Hose (Part No.21738)
from
$21.29
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; knitted synthetic fiber reinforcement; EPDM lid resistant to heat, ozone and chemical refrigerants
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Top Picks for 1987 Mercury Sable Serpentine and V Belts
Upgrade Mercury Sables with top-quality Serpentine and V Belts parts, including 14 OEM and aftermarket selections for your 1987 model.
Dayco – Poly Rib Belt Serpentine Belt; 42 Long, 4 Rib Count (Part No.5040420)
from
$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Dayco – Poly Rib Belt Serpentine Belt; 65 Long, 6 Rib Count (Part No.5060650)
from
$38.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Dayco – Poly Rib Belt Serpentine Belt; 42 Long, 5 Rib Count (Part No.5050420)
from
$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Dayco – Poly Rib Belt Serpentine Belt; 52.56 Long, 6 Rib Count (Part No.5060525)
from
$45.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Driveworks – Poly Rib Belt Serpentine Belt; 42 Long, 5 Rib Count (Part No.420K5)
from
$21.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Driveworks – Poly Rib Belt Serpentine Belt; 65 Long, 6 Rib Count (Part No.650K6)
from
$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Driveworks – Poly Rib Belt Serpentine Belt; 52.56 Long, 6 Rib Count (Part No.525K6)
from
$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Driveworks – Poly Rib Belt Serpentine Belt; 42 Long, 4 Rib Count (Part No.420K4)
from
$34.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Gates – Micro-V Serpentine Drive Belt (Part No.K040425)
from
$26.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all OEM specifications
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – Micro-V Serpentine Drive Belt (Part No.K060650)
from
$32.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all original equipment manufacturer specifications.
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Carquest Standard – Serpentine Belt: 42.0" Long, 4 Rib Count (Part No.420K4)
from
$23.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OE fit, form, and function
Carquest Standard – Serpentine Belt: 52.5" Long, 6 Rib Count (Part No.525K6)
from
$22.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OE fit, form, and function
Carquest Standard – Serpentine Belt: 42.0" Long, 5 Rib Count (Part No.420K5)
from
$21.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OE fit, form, and function
Gates – Micro-V Serpentine Drive Belt (Part No.K050420)
from
$13.79
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all OEM specifications
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
In-Demand Pulleys for 1987 Mercury Sables
Select from 1 premium Pulleys parts for your 1987 Mercury Sable.
Dayco – Idler Pulley, Dayco (Part No.89007)
from
$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Most Sold 1987 Mercury Sable Engine Cooling Hoses
Explore our best-selling Mercury parts for the 1987 Sable among 4 OEM and aftermarket options starting from $15.79.
Dayco – Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia. (Part No.81191)
from
$15.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Dayco – Flex Radiator Hoses; EPDM Rubber, 15.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81161)
from
$26.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.25" Long, 1.50" Diameter (Part No.C71302)
from
$15.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25477)
from
$17.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- Their great flexibility makes installation easy
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Top-Rated Belts and Hoses Brands For Your 1987 Mercury Sable
Shop for the best-rated brands offering Belts and Hoses and other products for your 1987 Mercury Sables. Below you’ll find some of our best rated Belts and Hoses from Dayco and DriveWorks, and more. Belts and Hoses from these brands that fit a 1987 Sable start at just $20.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 1987 Mercury Sable Belts and Hoses
When it comes to maintaining or upgrading your 1987 Mercury Sable, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1987 Mercury Sable. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $33.99, with an average price of just $35.66. Plus, with over 38 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$33.99
(25)
Poly Rib Belt Serpentine Belt; 42 Long, 4 Rib Count
“Looks well made . Very quiet and exact fit . I trust belt will perform well and look forward to quiet trouble free performance . Time will tell !”
Popular DriveWorks 1987 Mercury Sable Belts and Hoses
DriveWorks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1987 Mercury Sable owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1987 Sable, Advance Auto Parts carries a full inventory of 3 DriveWorks Belts and Hoses. Plus you will be keeping your Mercury in peak condition while saving money because prices on these DriveWorks Belts and Hoses range from $20.99 to $21.99, plus, with more than 12 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$21.99
(6)
Poly Rib Belt Serpentine Belt; 42 Long, 5 Rib Count
“Works & fits as it’s suppose to”
FAQs for 1987 Mercury Sable Belts and Hoses
Which Belts and Hoses are best-sellers for 1987 Mercury Sables?
Out of 29 Belts and Hoses that fit 1987 Mercury Sables, the following parts are the top sellers:
- Poly Rib Belt Serpentine Belt; 42 Long, 4 Rib Count (3340031) – $34.99
- Poly Rib Belt Serpentine Belt; 42 Long, 5 Rib Count (5063027) – $21.99
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (5197368) – $33.99
What’s the price range for 1987 Mercury Sable Belts and Hoses?
Belts and Hose prices for the 1987 Mercury Sable start at $9.79 and go up to $59.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1987 Mercury Sable?
The average price for Belts and Hoses for the 1987 Mercury Sable is $27.34. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Mercury Sable model years?
What are the cheapest Belts and Hoses for my 1987 Mercury Sable?
The cheapest 1987 Mercury Sable Belts and Hoses we carry in stock are:
- Premium Molded Coolant Hose (10511393) – $9.79
- Micro-V Serpentine Drive Belt (10495700) – $13.79
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.25" Long, 1.50" Diameter (5191777) – $15.79
- Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia. (5191106) – $15.99
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.25" Long, 1.50" Diameter (5190169) – $16.29
What are the top-rated Belts and Hoses that fit the 1987 Mercury Sable?
Out of 550 reviews by customers, our 1987 Mercury Sable Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1987 Mercury Sable and their top-rated products:
- Radiator Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (5197368) – $33.99
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (5197066) – $19.49
- Pulleys
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (5197368) – $33.99
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (5197066) – $19.49
- Serpentine and V Belts
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (5197368) – $33.99
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (5197066) – $19.49
What types of Belts and Hoses do you sell for my 1987 Mercury Sable?
As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1987 Mercury Sable:
Can I get help with 1987 Mercury Sable Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Belts and Hoses and more.
What is your return policy for Mercury Sable Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Mercury Sable Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
