1987 Jeep Wrangler Performance and Racing Products

Essential Performance and Racing Products for 1987 Jeep Wranglers

Energy Suspension – Coil Spring Isolator Set (Part No.2.6108R)

Coil Spring Isolator Set

from

$54.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7102G)

Track Arm Bushing Set

from

$13.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$40.99
Brake Bleeder Screws

Energy Suspension – Leaf Spring Bushing Set (Part No.2.2107G)

Leaf Spring Bushing Set

from

$58.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Omix – Clutch Disc (Part No.16905.04)

Clutch Disc

from

$164.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time.

Product Features:
  • For 2.5L
  • OE Style
  • Direct Fit
See More

Energy Suspension – Transmission Torque Arm Grommet (Part No.2.1101R)

Transmission Torque Arm Grommet

from

$7.99
Product Features:
  • Transmission Torque Arm Grommet
See More

Rancho – U-Bolt Kit (Part No.RS721)

U-Bolt Kit

from

$56.99
Replace your old or broken U-bolts with these high strength Rancho replacement U-bolt kits. These kits will work with a stock or an aftermarket leaf spring pack.

Product Features:
  • These replacement U-bolts are for Rancho suspension systems only. Do not use them on other suspension kits.
  • After 100 miles of use and after every off-road use, inspect all U-bolts for proper torque values.
  • Made from high strength steel
  • Works with a stock or an aftermarket leaf spring pack
  • Sold in a master quantity of 15
See More

Energy Suspension – Hyper-Flex System (Part No.2.18106G)

Hyper-Flex System

from

$673.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Energy Suspension – Body Cab Mount Set (Part No.2.4105R)

Body Cab Mount Set

from

$111.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Dynomax – TAIL PIPE (Part No.56157)

TAIL PIPE

from

$195.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5110G)

Sway Bar Bushing Set

from

$31.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Shackle Bushing Set (Part No.2.2120R)

Shackle Bushing Set

from

$18.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – SwyBarBshKt (Part No.2.5113R)

SwyBarBshKt

from

$37.99
SwyBarBshKt

Russell – Street Legal, Wrangler (YJ) with 4" lift (Part No.695940)

Street Legal, Wrangler (YJ) with 4" lift

from

$97.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More

Omix – Piston Ring Set (Part No.17430.24)

Piston Ring Set

from

$88.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • Standard
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Piston Ring Set (Part No.17430.22)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .040 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Dynomax – Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval (Part No.53804)

Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval

from

$182.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fibe

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Dyno proven to flow up to 700 SCFM
  • Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
  • 1.75-inch to 3-inch inlet / outlet configurations
See More

Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17283)

Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval

from

$156.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • Polished finish for a show quality shine
  • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39515)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Welded Muffler: Stainless Steel

from

$345.99
Give your Jeep Wrangler JK’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • COMPATIBILITY — Designed for 2012-2018 Jeep Wrangler JK; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
  • NOTES — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39456)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Welded Muffler: Stainless Steel

from

$397.99
Give your Jeep Wrangler JK’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • COMPATIBILITY — Designed for 2007-2011 Jeep Wrangler JK; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
  • NOTES — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
See More

Energy Suspension – Motor Mount (Part No.2.1104R)

Motor Mount

from

$71.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Energy Suspension – High Performance Transmission Mount for Street & Racing Vehicles (Part No.3.1108G)

High Performance Transmission Mount for Street & Racing Vehicles

from

$41.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Trans Mount: Urethane-Chevy

from

$84.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:
  • Durable Polyurethane
  • Absorbs Vibration
  • Last Longer Than Rubber
  • Built-In Safety Lock
See More

Upgrade your 1987 Jeep Wrangler with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1987 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Performance and Racing Products for the 1987 Jeep Wrangler, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1987 Jeep Wrangler at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.99 to $356.99, with an average price of $86.76. Our 41 Performance and Racing Products in stock come from 12 trusted brands, so you’re sure to find the right part for your 1987 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names like Accel, Energy Suspension, Mr. Gasket, and more. Accel Performance and Racing Products start at just $42.49 and boast an impressive 4 stars average rating from customers. Energy Suspension and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $7.99, and at an average 4 stars rating. With 633 customer reviews and counting, our 1987 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 1987 Jeep Wrangler!

Best-Selling Performance Engines for 1987 Jeep Wranglers

Enhance the driving experience in your Jeep with 2 quality Performance Engine components, starting at $26.99.

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Omix – Piston Ring Set (Part No.17430.22)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .040 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Most Popular 1987 Jeep Wrangler Performance Exhaust Products

Customize your Jeep with 6 Performance Exhaust Products products like Performance Exhaust Mufflers, Performance Exhaust System Kits, and Performance Exhaust Tail Pipes, all priced under $204.99.

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942447)

Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Dynomax – Single – 2.25in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17463)

Single - 2.25in Cat-Back Exhaust System - Super Turbo Muffler: Aluminized Steel

from

$189.99
Give your Jeep Cherokee XJ or Jeep Wagoneer exhaust system an upgrade with a DynoMax Super Turbo single 2.25-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.

Product Features:
  • COMPATIBILITY — Designed for 1986-1992 Jeep Cherokee and 1986-1990 Jeep Wagoneer; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipe, adapter and clamps
  • EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — Aluminized steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 415 SCFM
  • PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
  • ENGINEERED TO LAST¿–¿Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
  • ENGINEERED TO LAST┐–┐Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
  • SPECS — 2.25-in. straight cut oval tail pipe
See More

Dynomax – Exhaust Tail Pipe (Part No.44171)

Exhaust Tail Pipe

from

$70.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17289)

Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval

from

$204.99
DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • Polished finish for a show quality shine
  • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942452)

50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$139.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942442)

40 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Top Picks for 1987 Jeep Wrangler Performance Steering Products

Upgrade Jeep Wranglers with top-quality Performance Steering Products parts, including 10 OEM and aftermarket selections for your 1987 model.

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5111R)

Sway Bar Bushing Set

from

$32.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7101R)

Track Arm Bushing Set

from

$16.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Body Mount Set (Part No.2.4108R)

Body Mount Set

from

$268.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Body Mount Set (Part No.2.4108G)

Body Mount Set

from

$266.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Body Cab Mount Set (Part No.2.4105G)

Body Cab Mount Set

from

$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Body Cab Mount Set (Part No.2.4105R)

Body Cab Mount Set

from

$111.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Transmission Torque Arm Grommet (Part No.2.1101R)

Transmission Torque Arm Grommet

from

$7.99
Product Features:
  • Transmission Torque Arm Grommet
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5102R)

Sway Bar Bushing Set

from

$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5102G)

Sway Bar Bushing Set

from

$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

In-Demand Performance Ignition Products for 1987 Jeep Wranglers

Select from 4 premium Performance Ignition Products parts for your 1987 Jeep Wrangler, with prices ranging from $42.49 to $186.99.

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Most Sold 1987 Jeep Wrangler Performance Suspension Products

Explore our best-selling Jeep parts for the 1987 Wrangler among 10 OEM and aftermarket options starting from $17.99.

Energy Suspension – Shackle Bushing Set (Part No.2.2120G)

Shackle Bushing Set

from

$17.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Shackle Bushing Set (Part No.2.2110R)

Shackle Bushing Set

from

$18.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.2.2119G)

Leaf Spring Bushing Set

from

$58.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.2.2107G)

Leaf Spring Bushing Set

from

$58.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Energy Suspension – Coil Spring Isolator Set (Part No.2.6108R)

Coil Spring Isolator Set

from

$54.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

Energy Suspension – Shackle Bushing Set (Part No.2.2120R)

Shackle Bushing Set

from

$18.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.2.2107R)

Leaf Spring Bushing Set

from

$58.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Energy Suspension – Shackle Bushing Set (Part No.2.2110G)

Shackle Bushing Set

from

$18.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Rancho – DuraCrush Suspension Bushing Kit (Part No.RS982)

DuraCrush Suspension Bushing Kit

from

$77.99
Rancho® DuraCrush Suspension Bushing Kit has two reservoir clamps and DuraCrush suspension bushings in each kit. Bushings are Black for these universal parts.

Product Features:
  • Two reservoir clamps in each kit
  • Two DuraCrush suspension bushings in each kit
  • Bushings are black
  • Universal application
  • Quality part with long service life
See More

Energy Suspension – Hyper-Flex System (Part No.2.18101R)

Hyper-Flex System

from

$356.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Top-Rated Performance and Racing Products Brands For Your 1987 Jeep Wrangler

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1987 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from Accel, Energy Suspension, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1987 Wrangler start at just $7.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Accel 1987 Jeep Wrangler Performance and Racing Products

When it comes to maintaining or upgrading your 1987 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Accel ticks all of those boxes. We offer a wide selection of Accel Performance and Racing Products, specifically designed for the 1987 Jeep Wrangler. With over 2 Accel brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $42.49, with an average price of just $74.24. Plus, with over 54 customer reviews and an average rating of 4 stars, you can trust that our Accel Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Supercoil
from
$105.99
This product is not rated

Supercoil

“”

Popular Energy Suspension 1987 Jeep Wrangler Performance and Racing Products

Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1987 Jeep Wrangler owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1987 Wrangler, Advance Auto Parts carries a full inventory of 21 Energy Suspension Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $7.99 to $356.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Shackle Bushing Set
from
$17.99
This product is not rated

Shackle Bushing Set

“”

Shackle Bushing Set
from
$18.99
This product is not rated

Shackle Bushing Set

“”

Sway Bar Bushing Set
from
$32.99
This product is not rated

Sway Bar Bushing Set

“”

FAQs for 1987 Jeep Wrangler Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1987 Jeep Wranglers?

Out of 41 Performance and Racing Products that fit 1987 Jeep Wranglers, the following parts are the top sellers:

What’s the price range for 1987 Jeep Wrangler Performance and Racing Products?

Performance and Racing Product prices for the 1987 Jeep Wrangler start at $7.99 and go up to $356.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1987 Jeep Wrangler?

The average price for Performance and Racing Products for the 1987 Jeep Wrangler is $86.76. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?

Yes, we currently carry Performance and Racing Products for 36 model years of Jeep Wranglers between 1988 and 2024. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 1987 Jeep Wrangler?

The cheapest 1987 Jeep Wrangler Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1987 Jeep Wrangler?

Out of 633 reviews by customers, our 1987 Jeep Wrangler Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1987 Jeep Wrangler and their top-rated products:

What types of Performance and Racing Products do you sell for my 1987 Jeep Wrangler?

Can I get help with 1987 Jeep Wrangler Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.

What is your return policy for Jeep Wrangler Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.