1987 Hino FD16 Belts and Hoses
Find Your Specific 1987 Hino FD16 Belts and Hoses
Below you will find various in-demand Hino Belts and Hoses, components and accessories for your 1987 FD16. Advance Auto Parts has popular FD16 parts like Radiator Hoses, Engine Cooling Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other FD16 model years including
1986 and more. Select a category of 1987 Hino FD16 Belts and Hoses below and start saving instantly.
Popular 1987 Hino FD16 Belts and Hoses Categories
Essential Belts and Hoses for 1987 Hino FD16s
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25528)
from
$31.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for better leak resistance
- Their high flexibility makes installation easier
- Maximum vehicle coverage with a minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Automotive XL High Capacity V-Belt (Part No.9415)
from
$37.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-reinforced rubber adds flexibility along the entire length of the belt and ensures greater lateral stability in the pulley.
- The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
- Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22514)
from
$44.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Compliant with SAE J636b and SAE J637 specifications
- It meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand V-belts
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9415HD)
from
$40.99
Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material offers optimal performance at extremely high operating temperatures.
- Heavy-duty construction resists cracking, wear, oil and heat
- Special compound provides unmatched stability, load carrying capacity and belt life
- Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
- Troubleshooter for problematic drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA oil and heat resistant standards and static conductivity requirements
Gates – Premium Molded Coolant Hose (Part No.20046)
from
$34.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Upgrade your 1987 Hino FD16 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1987 Hino FD16, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hino or enhancing its overall performance, Belts and Hoses are key to keeping your FD16 functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Belts and Hoses for the 1987 Hino FD16, designed to meet your needs without breaking the bank.
From
Radiator Hose
replacements to
Engine Cooling Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1987 Hino FD16 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $31.99 to $44.99, with
an average price of $38.19.
Our 5 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1987 Hino FD16 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1987 Hino FD16 is always ready to roll. We’re committed to providing you with everything you need to keep your FD16 in top shape, all in one place.
Start shopping confidently below for your 1987 Hino FD16!
Best-Selling Radiator Hoses for 1987 Hino FD16s
Enhance the driving experience in your Hino with 1 quality Radiator Hose components, starting at $34.99.
Gates – Premium Molded Coolant Hose (Part No.20046)
from
$34.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Most Popular 1987 Hino FD16 Engine Cooling Hoses
Customize your Hino with 1 Engine Cooling Hoses products
like Lower Radiator Hoses, all
priced under $31.99.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25528)
from
$31.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for better leak resistance
- Their high flexibility makes installation easier
- Maximum vehicle coverage with a minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Top Picks for 1987 Hino FD16 Serpentine and V Belts
Upgrade Hino FD16s with top-quality Serpentine and V Belts parts, including 3 OEM and aftermarket selections for your 1987 model.
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9415HD)
from
$40.99
Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material offers optimal performance at extremely high operating temperatures.
- Heavy-duty construction resists cracking, wear, oil and heat
- Special compound provides unmatched stability, load carrying capacity and belt life
- Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
- Troubleshooter for problematic drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA oil and heat resistant standards and static conductivity requirements
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22514)
from
$44.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Compliant with SAE J636b and SAE J637 specifications
- It meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand V-belts
Gates – Automotive XL High Capacity V-Belt (Part No.9415)
from
$37.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-reinforced rubber adds flexibility along the entire length of the belt and ensures greater lateral stability in the pulley.
- The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
- Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
FAQs for 1987 Hino FD16 Belts and Hoses
Which Belts and Hoses are best-sellers for 1987 Hino FD16s?
Out of 5 Belts and Hoses that fit 1987 Hino FD16s, the following parts are the top sellers:
- Premium Molded Coolant Hose (10511150) – $34.99
- FleetRunner Heavy-Duty V-Belt (10913093) – $40.99
- Green Stripe Truck & Bus Series V-Belt (10495997) – $44.99
What’s the price range for 1987 Hino FD16 Belts and Hoses?
Belts and Hose prices for the 1987 Hino FD16 start at $31.99 and go up to $44.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1987 Hino FD16?
The average price for Belts and Hoses for the 1987 Hino FD16 is $38.19. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Belts and Hoses for my 1987 Hino FD16?
The cheapest 1987 Hino FD16 Belts and Hoses we carry in stock are:
- Vulco-Flex II Flexible Coolant Hose (10911538) – $31.99
- Premium Molded Coolant Hose (10511150) – $34.99
- Automotive XL High Capacity V-Belt (11520168) – $37.99
- FleetRunner Heavy-Duty V-Belt (10913093) – $40.99
- Green Stripe Truck & Bus Series V-Belt (10495997) – $44.99
What types of Belts and Hoses do you sell for my 1987 Hino FD16?
As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1987 Hino FD16:
Can I get help with 1987 Hino FD16 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hino Belts and Hoses and more.
What is your return policy for Hino FD16 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Hino FD16 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
