1987 Dodge Dakota Performance and Racing Products

Essential Performance and Racing Products for 1987 Dodge Dakotas

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Rancho – RS5000 Steering Damper (Part No.RS5405)

RS5000 Steering Damper

from

$83.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
  • ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
  • HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
See More

Energy Suspension – SwyBarBshKt (Part No.5.5167G)

SwyBarBshKt

from

$25.99
SwyBarBshKt

Energy Suspension – Leaf Spring Bushing Set (Part No.5.2107R)

Leaf Spring Bushing Set

from

$68.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.5.2107G)

Leaf Spring Bushing Set

from

$70.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Energy Suspension – Control Arm Bushing Set (Part No.5.3122G)

Control Arm Bushing Set

from

$83.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Energy Suspension – Control Arm Bushing Set (Part No.5.3115R)

Control Arm Bushing Set

from

$83.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Remote Oil Filter Kit

from

$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:
  • Relocate oil filter to an easy access location
See More

Flowmaster Inc. – DBX Muffler, 3in Center Inlet 3in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.13014310)

DBX Muffler, 3in Center Inlet 3in Center Outlet, 14in long, Non-Reversible, Moderate Sound

from

$227.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17519)

Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval

from

$118.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • Polished finish for a show quality shine
  • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
See More

Energy Suspension – Body Cab Mount Set (Part No.5.4106R)

Body Cab Mount Set

from

$99.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – SuspCntrlArmBmpr (Part No.5.6102G)

SuspCntrlArmBmpr

from

$29.99
SuspCntrlArmBmpr

Richmond Gear – Differential Ring And Pinion (Part No.69-0220-1)

Differential Ring And Pinion

from

$438.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Richmond Gear – RngPnn (Part No.CR825355)

RngPnn

from

$185.99
RngPnn

Powertrax – No-Slip Traction System (Part No.9203822705)

No-Slip Traction System

from

$527.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Powertrax – No-Slip Traction System (Part No.9203923125)

    No-Slip Traction System

    from

    $579.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Energy Suspension – Sway Bar Bushing Set (Part No.5.5141G)

    Sway Bar Bushing Set

    from

    $34.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.5.5148G)

    Sway Bar Bushing Set

    from

    $32.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    MSD Ignition – Tach Adapter (Part No.8910)

    Tach Adapter

    from

    $91.99
    In some instances when you install an MSD ignition, the factory ECU may not be able to distinguish when the coil fires. This is the signal that is also responsible for firing the injectors (or the tachometer), which may cause a no-run situation. The dual channel ignition adapter simulates the original coil trigger signal thus allowing the ECU to properly trigger both the tach and fuel injection with the MSD DIS ignition installed. In most cases, the adapter plugs directly into the MSD’s harness. For vehicles using an MSD DIS-2 ignition, only one PN 8912 is required. For DIS-4 applications, two PN 8912’s are required.

    Product Features:
    • Designed for non-current limiting ignitions
    • Size Non-Current Limiting Ignitions
    • Easy mounting and installation
    • Simulates the coil signal
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.5.3122R)

    Control Arm Bushing Set

    from

    $87.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.5.3115G)

    Control Arm Bushing Set

    from

    $83.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    MSD Ignition – Coil; Chrysler Late Model; 90-96 (Part No.8228)

    Coil; Chrysler Late Model; 90-96

    from

    $72.09
    When it comes to late model performance parts nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. The MSD blaster coils is a direct replacement for late model dodges.

    Product Features:
    • Direct performance replacement for late model Dodge vehicles
    • Works w/Stock Ignition As Well As MSD Ignitions
    • CARB E.O. Approved
    • Improved mid range RPM power
    • Connect to factory wiring
    • Use PN 8877 harness for direct plug in install
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

    High-Performance Ignition Coil - Direct OE Fit

    from

    $72.39
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Uf-198
    • MSD 8228
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Upgrade your 1987 Dodge Dakota with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1987 Dodge Dakota, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your Dakota functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Performance and Racing Products for the 1987 Dodge Dakota, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1987 Dodge Dakota at great prices. Our Performance and Racing Products inventory for this model ranges from just $29.99 to $527.99, with an average price of $117.09. Our 20 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 1987 Dodge Dakota without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Dodge Dakota, we stock popular OEM and aftermarket Performance and Racing Products from top names like Rancho, and more. Rancho Performance and Racing Products start at just $83.99 and boast an impressive 4 stars average rating from customers. With 62 customer reviews and counting, our 1987 Dodge Dakota Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 Dodge Dakota is always ready to roll. We’re committed to providing you with everything you need to keep your Dakota in top shape, all in one place. Start shopping confidently below for your 1987 Dodge Dakota!

    Best-Selling Performance Steering Products for 1987 Dodge Dakotas

    Enhance the driving experience in your Dodge with 4 quality Performance Steering Product components, starting at $35.99.

    Rancho – RS5000 Steering Damper (Part No.RS5405)

    RS5000 Steering Damper

    from

    $83.99
    Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

    Product Features:
    • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
    • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
    • ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
    • HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
    See More

    Energy Suspension – Body Cab Mount Set (Part No.5.4106R)

    Body Cab Mount Set

    from

    $99.99
    Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

    Product Features:
    • Assures Longer Lasting Cab to Bed Alignment
    • Replace to Restore Ride Height
    • Gain Durability
    • Stronger Than Original Rubber Mounts
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.5.5118R)

    Sway Bar Bushing Set

    from

    $42.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – SwyBarBshKt (Part No.5.5165G)

    SwyBarBshKt

    from

    $35.99
    SwyBarBshKt

    Most Popular 1987 Dodge Dakota Performance Ignition Products

    Customize your Dodge with 4 Performance Ignition Products products like Performance Coils, Performance Ignition Parts, and Performance Ignition Systems, all priced under $186.99.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    MSD Ignition – Tach Adapter (Part No.8910)

    Tach Adapter

    from

    $91.99
    In some instances when you install an MSD ignition, the factory ECU may not be able to distinguish when the coil fires. This is the signal that is also responsible for firing the injectors (or the tachometer), which may cause a no-run situation. The dual channel ignition adapter simulates the original coil trigger signal thus allowing the ECU to properly trigger both the tach and fuel injection with the MSD DIS ignition installed. In most cases, the adapter plugs directly into the MSD’s harness. For vehicles using an MSD DIS-2 ignition, only one PN 8912 is required. For DIS-4 applications, two PN 8912’s are required.

    Product Features:
    • Designed for non-current limiting ignitions
    • Size Non-Current Limiting Ignitions
    • Easy mounting and installation
    • Simulates the coil signal
    See More

    Top Picks for 1987 Dodge Dakota Performance Suspension Products

    Upgrade Dodge Dakotas with top-quality Performance Suspension Products parts, including 5 OEM and aftermarket selections for your 1987 model.

    Energy Suspension – Control Arm Bushing Set (Part No.5.3115R)

    Control Arm Bushing Set

    from

    $83.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.5.3115G)

    Control Arm Bushing Set

    from

    $83.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Energy Suspension – Leaf Spring Bushing Set (Part No.5.2107G)

    Leaf Spring Bushing Set

    from

    $70.99
    Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Adds Dramatic Amount of Performance/Durability
    • Helps Vehicle Be in Control
    • Allows the Suspension to Function Properly
    See More

    Energy Suspension – Leaf Spring Bushing Set (Part No.5.2107R)

    Leaf Spring Bushing Set

    from

    $68.99
    Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Adds Dramatic Amount of Performance/Durability
    • Helps Vehicle Be in Control
    • Allows the Suspension to Function Properly
    See More

    Energy Suspension – SuspCntrlArmBmpr (Part No.5.6102G)

    SuspCntrlArmBmpr

    from

    $29.99
    SuspCntrlArmBmpr

    In-Demand Performance Exhaust Products for 1987 Dodge Dakotas

    Select from 2 premium Performance Exhaust Products parts for your 1987 Dodge Dakota, with prices ranging from $133.99 to $154.99.

    Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

    50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound

    from

    $154.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942041)

    40 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound

    from

    $133.99
    This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Most Sold 1987 Dodge Dakota Performance Oil Filters

    Explore our best-selling Dodge parts for the 1987 Dakota among 1 OEM and aftermarket options starting from $97.99.

    Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

    Remote Oil Filter Kit

    from

    $97.99
    This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

    Product Features:
    • Relocate oil filter to an easy access location
    See More

    Top-Rated Performance and Racing Products Brands For Your 1987 Dodge Dakota

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1987 Dodge Dakotas. Below you’ll find some of our best rated Performance and Racing Products from Rancho, and more. Performance and Racing Products from these brands that fit a 1987 Dakota start at just $83.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Rancho 1987 Dodge Dakota Performance and Racing Products

    When it comes to maintaining or upgrading your 1987 Dodge Dakota, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Rancho ticks all of those boxes. We offer a wide selection of Rancho Performance and Racing Products, specifically designed for the 1987 Dodge Dakota. With over 1 Rancho brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $83.99. Plus, with over 3 customer reviews and an average rating of 4 stars, you can trust that our Rancho Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    RS5000 Steering Damper
    from
    $83.99

    (3)

    RS5000 Steering Damper

    “This doesn’t fit a stock truck”

    FAQs for 1987 Dodge Dakota Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1987 Dodge Dakotas?

    Out of 20 Performance and Racing Products that fit 1987 Dodge Dakotas, the following parts are the top sellers:

    What’s the price range for 1987 Dodge Dakota Performance and Racing Products?

    Performance and Racing Product prices for the 1987 Dodge Dakota start at $29.99 and go up to $527.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1987 Dodge Dakota?

    The average price for Performance and Racing Products for the 1987 Dodge Dakota is $117.09. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Dodge Dakota model years?

    Yes, we currently carry Performance and Racing Products for 23 model years of Dodge Dakotas between 1988 and 2010. Performance and Racing Products are bought most frequently for the following model years: 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, and 2002.

    What are the cheapest Performance and Racing Products for my 1987 Dodge Dakota?

    The cheapest 1987 Dodge Dakota Performance and Racing Products we carry in stock are:

    Can I get help with 1987 Dodge Dakota Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

    What is your return policy for Dodge Dakota Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Dodge Dakota Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.