1987 Chevrolet R20 Truck Beds

Essential 1987 Chevrolet R20 Truck Beds

KAI – Truck Bed Panel (Part No.GMK414482873L)

Truck Bed Panel

from

$29.99
New Goodmark Driver Side Tailgate Post Patch, For Fleetside Models

Product Features:
  • For Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design (Part No.DZ95050RTB)

Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design

from

$968.99
Even if you secure your cargo properly, it can still happen. Driving on todays hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab rear window. With the Dee Zee Cab Rack this is no longer a concern. Made of 100 Percent 2.5 Inch aluminum tubing with a protective textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra-mesh – for your protection and visibility requirements.

Product Features:
  • Rugged Protection For Your Trucks Rear Cab Area
  • 2.5 Inch Hexagonal Aluminum Tubing For Rugged Construction
  • Heavy-Duty Aluminum Ultra Mesh Offers More Visibility And Protection Depending On Your Needs
  • Protective Textured Black Powder Coat Finish Keeps Your Rack Looking Fresh
  • Integrated Channel System For Easy Addition Of Accessories
  • Install Into Existing Stake Pocket Holes
See More

Extang – Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl (Part No.92545)

Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl

from

$499.99
The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.

Product Features:
  • Lockable Via Tailgate Lock
  • Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
  • Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
  • EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
  • Clamping System Attaches To Your Truck In Seconds For Easy Installation
  • Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
  • Easy To Use Folding Design With Smooth Sleek Looks
See More

Extang – Trifecta (TM) 2.0 tri-fold Tonneau Cover, Black vinyl, 75-87 C10 Series 8 Ft Bed (Part No.92535)

Trifecta (TM) 2.0 tri-fold Tonneau Cover, Black vinyl, 75-87 C10 Series 8 Ft Bed

from

$499.99
Extangs Trifecta Tri Fold Tonneau has an easy to use folding design, smooth sleek looks and unmatched durability. This user friendly soft tonneau requires no assembly, no drilling, and installation is as easy as positioning the cover on your truck, tightening the clamps and you’re ready to go. The Hold Tite Straps And Snaps, WeatherTuff Seals, and MaxHinges are all Extang Engineered in order to ensure the best in security and safety.

Product Features:
  • Non Lockable
  • Heavy Duty Vinyl Helps To Keep Your Cargo Protected From Whatever Weather You Drive Through
  • Heavy Duty Luggage Style Hold Tite Fasteners Secure The Tonneau In The Open Position At The Cab, Provides Quick And Easy Storage When Hauling Large Cargo
  • Features A Rich Looking All Black Frame, It Has A Perfectly Sewn And Tight Fitting, Double Layered Vinyl With Anti Curl Corners
  • Ultra Strong, Rugged, Double Pivot Design. Max Hinges Are Made Of Durable Glass Filled Nylon And Feature Protective Padding
  • Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
  • Easy To Use Folding Design With Smooth Sleek Looks
  • Limited Lifetime Warranty
See More

Lund – Genesis Elite Roll Up Tonneau (Part No.96800)

Genesis Elite Roll Up Tonneau

from

$518.99
The Genesis Roll Up is a low profile, soft tonneau cover utilizing heavy-duty velcro hook and loop fasteners, so you can get to your tools easily and cover your bed quickly. The cover’s weather and tear-resistant fabric features a set of adjustable straps ensuring a tight fit and protection against water damage. After rolling up, the bed cover is secured by nylon straps. LUND’s Genesis Roll Up tonneau covers are designed fit to your specific make, model and year, providing a custom style that looks great on your truck. Pre-assembled to install in minutes. The cover installs easily onto any vehicle in under a half hour. It features a pre-assembled, no-drill design and applies to your bed with heavy-duty adjustable clamps.

Product Features:
  • Heavy Duty Attractive And Durable
  • Resistant To Water/ Mildew And UV Rays
  • Conceals/ Secures And Protects Cargo
  • Styles Can Be Installed Or Removed In Minutes
  • Reduces Tailgate Drag
  • Pre Assembled For Easy Installation
  • Designed Specifically For Your Make/ Model And Year
  • Cleans Easily With Water
  • Limited Lifetime Warranty
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124037)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum

from

$331.99
With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.

Product Features:
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Rugged Tread Pattern Provides For Safe And Attractive Non-Slip Surface
  • Innovative Stylish Design
  • Strong Construction To Hold Up Under Extreme Conditions
  • Exclusive New Multi-Mount System
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

KAI – Truck Floor Support (Part No.RRP1170)

Truck Floor Support

from

$36.99
New Standard Replacement Front Cab Floor Support, 13 X 4 1/4

Product Features:
  • 13 X 4 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Floor Support (Part No.RRP117)

Truck Floor Support

from

$12.99
New Standard Replacement Front Cab Floor Support, Slip-On Style, 13 X 4

Product Features:
  • Slip-On Style, 13 X 4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Support (Part No.GMK414451773L)

Truck Cab Support

from

$149.99
New Goodmark Driver Side Cab Floor Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Support (Part No.GMK414451773R)

Truck Cab Support

from

$149.99
New Goodmark Passenger Side Cab Floor Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bed Panel Patch (Part No.GMK4144610731R)

Bed Panel Patch

from

$79.99
New Goodmark Passenger Side Lower Front Bedside Patch, For Shortbed Fleetside Models

Product Features:
  • For Shortbed Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bed Panel Patch (Part No.GMK4144690732R)

Bed Panel Patch

from

$54.99
New Goodmark Passenger Side Lower Rear Bedside Patch, For Longbed Fleetside Models, 31 Inches L X 12 3/4 Inches H

Product Features:
  • For Longbed Fleetside Models 31 Inches Long X 12 3/4 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bed Panel Patch (Part No.GMK4144690732L)

Bed Panel Patch

from

$54.99
New Goodmark Driver Side Lower Rear Bedside Patch, For Longbed Fleetside Models, 31 Inches Long X 12 3/4 Inches High

Product Features:
  • For Longbed Fleetside Models 31 Inches Long X 12 3/4 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bed Panel Patch (Part No.GMK4144610731L)

Bed Panel Patch

from

$79.99
New Goodmark Driver Side Lower Front Bedside Patch, For Shortbed Fleetside Models

Product Features:
  • For Shortbed Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Floor Support (Part No.GMK4144731733)

Truck Floor Support

from

$99.99
New Goodmark Bed Cross Sill For Stepside Pickups, 3 Required For Short Bed Models, 5 Required For Long Bed Models

Product Features:
  • 3 Required For Short Bed Models 5 Required For Long Bed Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.RRP109)

Truck Cab Corner

from

$8.99
New Standard Replacement Passenger Side Cab Corner, Slip-On Type, 2 Door Regular Cab, 4.75 X 16

Product Features:
  • Slip-On Type, 2 Door Regular Cab, 4.75 X 16, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.GMK414448673R)

Truck Cab Corner

from

$29.99
New Goodmark Passenger Side Inner Cab Corner

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.GMK4144485732R)

Truck Cab Corner

from

$34.99
New Goodmark Passenger Side Outer Cab Corner, 18.9 Inches High X 13.9 Inches Wide X 4.3 Inches Deep

Product Features:
  • 18.9 Inches High X 13.9 Inches Wide X 4.3 Inches Deep
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.GMK4144485732L)

Truck Cab Corner

from

$34.99
New Goodmark Driver Side Outer Cab Corner, 18.9 Inches High X 13.9 Inches Wide X 4.3 Inches Deep

Product Features:
  • 18.9 Inches High X 13.9 Inches Wide X 4.3 Inches Deep
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.RRP110)

Truck Cab Corner

from

$8.99
New Standard Replacement Driver Side Cab Corner, Slip-On Type, 2 Door Regular Cab, 4.75 X 16

Product Features:
  • Slip-On Type, 2 Door Regular Cab, 4.75 X 16, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

1987 Chevrolet R20 Truck Beds

Maybe you’re in the middle of a full rebuild of that 1987 Chevrolet R20. Maybe you just need a couple of Truck Beds. Either way, Advance Auto Parts has 18 different Truck Beds in our inventory ranging from $8.99 to $968.99. That means you can find the exact parts or products you need to keep that 1987 Chevrolet R20 running smoothly.

Truck Beds are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Chevrolet R20. KAI, Dee Zee, and CARR are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Truck Beds for your 1987 Chevrolet R20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Truck Beds to keep your 1987 Chevrolet R20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Truck Beds Brands To Make Your 1987 Chevrolet R20 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Chevrolet R20 demands trusted brand parts and products to keep it running. Many trusted brands of Truck Beds make up Advance Auto Parts’ inventory, and all are ready to help make your R20 the best it can be. Be sure to browse some of our top Truck Beds brands and parts.

FAQs for 1987 Chevrolet R20 Truck Beds

What are the most purchased Truck Beds for the 1987 Chevrolet R20?

Out of 18 Truck Beds for the 1987 Chevrolet R20, the most popular in our inventory are:
Truck Floor Support
from $99.99
This product is not rated
Truck Floor Support
Truck Bed Floor Supports
Truck Floor Support
from $12.99
This product is not rated
Truck Floor Support
Truck Cab Floor Supports
Bed Panel Patch
from $79.99
This product is not rated
Bed Panel Patch
Truck Bed Panel Patches