1987 Chevrolet R20 Performance and Racing Products

Popular 1987 Chevrolet R20 Performance and Racing Products Categories

Essential Performance and Racing Products for 1987 Chevrolet R20s

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Spectre – Throttle Body Injection Spacer (Part No.11252)

Throttle Body Injection Spacer

from

$94.99
Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:
  • Includes the necessary gaskets and hardware to bolt directly to the factory components
  • Each kit is designed for the applications listed
  • Manufactured from high quality machine finished aluminum
  • Can be installed in less than an hour using common hand tools with no drilling or cutting required
  • Simple to install
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4377)

Cylinder Head Dowel Pins

from

$17.79
Big Block Chevrolet tubular head dowel, .638/.639 inch o.d. (outer diameter) by 1/2 inch. Packaged two per set. These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly.

Product Features:
  • Precision Machined
  • Case Hardened
  • Give Accurate Alignment
  • 2 Per Set
See More

Energy Suspension – Motor and Transmission Mount (Part No.3.1128G)

Motor and Transmission Mount

from

$129.99
Product Features:
  • Re-Engineered to Handle High Horsepower
  • Outlasts Rubber
  • Virtually Indestructible
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7810)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$74.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
See More

Richmond Gear – RngPnn (Part No.GM85410)

RngPnn

from

$185.99
RngPnn

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Automatic Shifter, Hammer Shifter, Universal

from

$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:
  • Ratchet Action Shifter
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • Reverse Lockout Feature
See More

MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

Crank Trigger Kit; Small Block Chevy; 6? Balancer

from

$461.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • 6.25 in. Diameter
  • Absolutely the most accurate way to trigger the ignition.
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
See More

Motive Gear – Differential Carrier (Part No.6258336)

Differential Carrier

from

$211.99


Product Features:
  • GM10.5″ 14 BOLT OPEN EMPTY CASE 4:10 & DWN
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

MSD Ignition – Rotor; GM HEI (Part No.8410)

Rotor; GM HEI

from

$13.29
Replacement rotor for Chevrolet HEI style distributors.

Product Features:
  • For HEI distributors
  • Resist carbon tracking
  • Low resistance brass
  • Max voltage transfer
  • Molded from insulated material
See More

Spectre – Alternator Bracket (Part No.4719)

Alternator Bracket

from

$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

Product Features:
  • Fits Big Block Chevy engines with a long water pump from 1969 and later
  • Manufactured from high quality steel
  • Upper bracket for passenger side mounting
  • Features a triple chrome-plated finish
  • Stock replacement part
See More

Hays – Power Train (Part No.90-103)

Power Train

from

$499.99
Power Train

Mr. Gasket – Ultra Seal; Timing Cover Bolts (Part No.6090)

Ultra Seal; Timing Cover Bolts

from

$13.29
The special self locking timing cover bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5. Application: Chevy small and big block, 1/4 inch-20 ix 1/2 inch,10 pieces.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)

High Performance Ignition Module for GM HEI Distributors

from

$69.99
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

Product Features:
  • Fits Most Stock And Modified Distributors
  • Solid State Electronics
  • Dwell Control Circuit
See More

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)

Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454

from

$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:
  • Cam and lifter kit for Big Block Chevy engines
  • CL-Kit includes cam, lifters, assembly lube, instructions and decals
  • HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
  • 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17234)

Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval

from

$272.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2918)

Engine Crankshaft Seal Kit

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Distributor Cap; GM HEI; Red

from

$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:
  • Stock GM HEI replacement distributor cap
  • Red
See More

Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

from

$329.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Shank O.D. .540″
  • Includes Locks and Hex Wrench
  • High-Quality Grade Steel
  • Heat-Treated For Ex Strength
  • Plated With Durable Gold Tone Finish
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

Engine Valve Cover Gasket Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)

Exhaust Manifold Gasket Set

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mr. Gasket – A/Tdipstick (Part No.9704G)

A/Tdipstick

from

$79.99
Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.

Product Features:
  • Braided Stainless Steel
  • Firewall Mounting
  • Includes Oil Fill Tube
See More

Powertrax – No-Slip Traction System (Part No.9207853005)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Upgrade your 1987 Chevrolet R20 with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1987 Chevrolet R20, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your R20 functioning at its best. At Advance Auto Parts, we offer a wide selection of 221 Performance and Racing Products for the 1987 Chevrolet R20, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1987 Chevrolet R20 at great prices. Our Performance and Racing Products inventory for this model ranges from just $10.49 to $1,322.99, with an average price of $253.70. Our 221 Performance and Racing Products in stock come from 24 trusted brands, so you’re sure to find the right part for your 1987 Chevrolet R20 without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Chevrolet R20, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Mr. Gasket, MSD Ignition, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. Mr. Gasket and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $10.49, and at an average 4 stars rating. With 538 customer reviews and counting, our 1987 Chevrolet R20 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 Chevrolet R20 is always ready to roll. We’re committed to providing you with everything you need to keep your R20 in top shape, all in one place. Start shopping confidently below for your 1987 Chevrolet R20!

    Best-Selling Performance Engines for 1987 Chevrolet R20s

    Enhance the driving experience in your Chevrolet with 114 quality Performance Engine components, starting at $14.99.

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $52.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1037)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $65.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

    Engine Valve Cover Gasket Set

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

    Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

    from

    $329.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke; Waterneck; and HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes
    See More

    Spectre – Throttle Body Injection Spacer (Part No.11252)

    Throttle Body Injection Spacer

    from

    $94.99
    Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

    Product Features:
    • Includes the necessary gaskets and hardware to bolt directly to the factory components
    • Each kit is designed for the applications listed
    • Manufactured from high quality machine finished aluminum
    • Can be installed in less than an hour using common hand tools with no drilling or cutting required
    • Simple to install
    See More

    Competition Cams – Engine Valve Spring Kit (Part No.911-16)

    Engine Valve Spring Kit

    from

    $759.99
    Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757

    Product Features:
    • Seat pressure: 122 lbs. @ 1.900″, Open Pressure: 309 lbs. @ 1.400″
    • O.D.: 1.524″, I.D.: 1.110″
    • Single valve springs with damper
    See More

    FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2918)

    Engine Crankshaft Seal Kit

    from

    $42.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $151.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Non-Rotator Style: Dyno Tested and Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Die cut silicone rubber gaskets conform to out-of-flat covers
    • Great for on-again/off-again situations
    • Not intended for use in emission controlled vehicles.
    See More

    B & M – Tork Master 3000 (Part No.20402)

    Tork Master 3000

    from

    $499.99
    Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    • Washer Between Turbine and Cover
    See More

    B & M – Tork Master 2400 (Part No.20404)

    Tork Master 2400

    from

    $339.99
    Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

    Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet

    from

    $306.99


    Product Features:
    • Designed for Optimum Torque and Acceleration
    • Maximum Performance From Idle through Mid-Range
    • Matched to Edelbrock Performer Intakes
    • Includes Hydraulic Lifters and Assembly Lube
    • Major Improvement in Throttle Response and Torque
    • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
    • Take The Guesswork Out Of Camshaft Selection
    See More

    Weiand – Action Plus Water Pumps (Part No.9240P)

    Action Plus Water Pumps

    from

    $215.99
    Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

    Product Features:
    • Twisted Snout Water Pump Design For Updated Style
    • Street Performance
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six-Blade Stamped Steel
    • Anti-Cavitation Impeller
    • 100 Percent Leak Tested
    See More

    Weiand – Action Plus Water Pumps (Part No.9208P)

    Action Plus Water Pumps

    from

    $215.99
    Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

    Product Features:
    • Twisted Snout Water Pump Design For Updated Style
    • Street Performance
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six-Blade Stamped Steel
    • Anti-Cavitation Impeller
    • 100 Percent Leak Tested
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 9 Piece Set (Part No.1212)

    Lower Intake Manifold Gasket Set: 9 Piece Set

    from

    $27.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
    • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    See More

    Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

    Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

    from

    $17.49
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

    Product Features:
    • Zinc plated to resist corrosion and provide a clean professional appearance
    • Made from Grade 5 steel for strength and durability
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Allen (socket) Head
    • Zinc Plated For Protection
    See More

    Mr. Gasket – Bolt Water Pump (Part No.4998)

    Bolt Water Pump

    from

    $32.99
    This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners to install the water pump on your small or big block Chevrolet with the long style water pump. Includes four 3/8 inch-16 x 2 inch bolts with four 3/8 inch AN washers. AN washers have no exposed shoulder which offers a professional appearance.

    Product Features:
    • Chrome Plated
    • Grade 5
    • AN washers with no exposed shoulder for a professional appearance
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1884 R)

    PERFORMANCE OIL PAN GASKET SET

    from

    $64.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    Mr. Gasket – Valve Cover Gasket Set (Part No.182)

    Valve Cover Gasket Set

    from

    $42.99
    Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .312 inch thick. That’s substantially thicker than stock which can allow for additional valve train clearance.brbrFits Chevrolet 396,402,427,454,502 Gen IV, Gen V and Gen VI Big Block.

    Product Features:
    • This Gasket Has A Cork Rubber Blend
    • Provides Excellent Sealing And Durability
    • Extra Thick For The Hard To Seal Applications
    See More

    Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

    Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

    from

    $65.99
    Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5867)

    Ultra Seal: Valve Cover Gasket Set

    from

    $38.49
    Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187 inch thick. They fit both 1987-2002 Gen I Chevrolet Small Blocks as well as 1992-1997 Gen II LT-Based Small Blocks.

    Product Features:
    • Manufactured from high-density cork /rubber blend gasket material
    • A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
    • Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
    • For OE replacement, high performance street, drag race and oval track
    • .187″ thick
    • Handles Ex Flange Pressure
    • Forms Leak Proof Seal
    • Black Latex Coating
    See More

    Mr. Gasket – Intake Manifold Bolts (Part No.957G)

    Intake Manifold Bolts

    from

    $25.99
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers

    Product Features:
    • Zinc plated Grade 5 steel
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Ideal For Minimal Space
    • 12-Point Head And Flange
    • Zinc Plated For Protection
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

    Engine Valve Cover Gasket Set

    from

    $25.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Die cut silicone rubber gaskets conform to out-of-flat covers
    • Great for on-again/off-again situations
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7810)

    Performer-Link Adjustable True-Roller Timing Chain Set

    from

    $74.99


    Product Features:
    • Solid Bushing Chain Resists Stretching
    • For Use with Stock or Edelbrock Camshafts
    • Stressproof Steel Crank Gears
    • 3 Keyway Setting Points To Ensure Accurate Timing
    • True Bearing Surface Rolls with the Sprockets
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)

    PERFORMANCE OIL PAN GASKET SET

    from

    $63.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262 (Part No.7209)

    Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262

    from

    $27.99
    Edelbrock part #7209 Intake Gaskets for 1985-1995, Chevy V6 200-229-262 (3.8 and 4.3L) allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-

    Product Features:
    • 1.28″x2.10″
    • Stock Port Style
    • .060″ Thick
    • Multi Piece Configuration
    • Composite Material
    See More

    Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

    Cylinder Head Dowel Pins

    from

    $14.99
    Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

    Product Features:
    • Precision Machined
    • Case Hardened
    • Give Accurate Alignment
    • 2 Per Set
    See More

    FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

    Engine Timing Cover Gasket

    from

    $20.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Steel core gasket construction
    • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

    Performance Torque Converter for GM TH400, 350, & 375 Transmissions

    from

    $299.99
    Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Edelbrock – Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8 (Part No.5862)

    Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8

    from

    $80.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1047)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $72.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)

    Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height

    from

    $126.99
    Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

    Product Features:
    • Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
    • O.D.: 1.254″, I.D.: .880″
    • Single valve springs with damper
    • Approximately .490″ max lift at recommended installed height
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

    Ultra Seal: Head Gasket

    from

    $68.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5780G)

    Ultra Seal: Head Gasket

    from

    $64.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 3.870 inch, Compressed thickness 0.028 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Mr. Gasket – Intake Gasket (Part No.116)

    Intake Gasket

    from

    $40.19
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material.
    • Provides excellent sealing and durability.
    • Can be trimmed if necessary for modified port applications.
    • Complete with manifold end seals and distributor gasket.
    • For OE replacement, high performance street, drag race and oval track use.
    See More

    Mr. Gasket – Head Gasket (Part No.1130G)

    Head Gasket

    from

    $32.99
    Mr. Gasket Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. With today’s extreme compression ratios you need stronger more durable gaskets. Mr. Gasket steel shim gaskets are made from .020 inch steel shim stock which is thinner than most composite gaskets increasing engine compression. Stress formed embossments will seal the extreme cylinder pressure.

    Product Features:
    • Manufactured from .020″ steel shim stock.
    • Thinner than composition head gaskets – increases engine compression.
    • Stress formed embossments seal extreme cylinder pressures.
    • For high performance street, drag race and oval track use.
    See More

    Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.5885)

    Ultra Seal: Oil Pan Gasket

    from

    $42.49
    Manufactured from cellulose/nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile rubber composition gasket material
    • Provides excellent sealing and durability
    • Complete with molded rubber front/rear oil pan end seals where applicable
    • For OE replacement, high performance street, drag race and oval track use
    • Graphite Non-Wicking Rubber
    • No Cork Particles
    • Easy Removal For Disassembly
    See More

    FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

    Engine Crankshaft Seal Kit

    from

    $37.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

    Pushrod Set for S/B Chevy

    from

    $187.99


    Product Features:
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates
    See More

    Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)

    CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA

    from

    $529.99
    Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

    Product Features:
    • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
    • Best with aftermarket converters and more rear gear.
    • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
    See More

    Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

    CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

    from

    $258.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

    Ultra Seal: Competition Screw-In Rocker Arm Studs

    from

    $94.99
    Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

    Product Features:
    • Black Oxide Coated Grade 8 Steel
    • Kit Contains 16 Studs
    • Easy To Install
    • Heat Treated Steel
    • Prevents Stud Flexing
    • Black Plated Finish
    See More

    Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

    Ultra Seal: Screw-In Rocker Arm Studs

    from

    $65.99
    Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

    Product Features:
    • Black Oxide Coated Grade 8 Steel
    • Kit Contains 16 Studs
    • Easy To Install
    • Heat Treated Steel
    • Grade 8 Steel
    See More

    Mr. Gasket – Intake Gasket (Part No.143)

    Intake Gasket

    from

    $42.49
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Die-cut for an excellent fit
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    See More

    Most Popular 1987 Chevrolet R20 Performance Ignition Products

    Customize your Chevrolet with 12 Performance Ignition Products products like Performance Coils, Performance Spark Plug Wires, and Performance Ignition Modules, all priced under $461.99.

    Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

    High Energy Ignition Coil for GM HEI - 1973-1991

    from

    $100.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Dr-31
    • MSD 8225
    See More

    MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

    High Energy Ignition Coil for GM HEI Distributors

    from

    $112.99
    HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    Product Features:
    • Direct performance replacement for GM HEI coil-in-cap dist.
    • 70:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

    Coil; GM External HEI Coil; High Performance

    from

    $71.99
    Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

    Product Features:
    • Direct performance replacement for GM dual connector coil
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Works w/Stock Ignition As Well As MSD Ignitions
    See More

    MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

    Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

    from

    $65.99
    These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

    Product Features:
    • Replacement Coil For GM Dual Connector Coil
    • Improved Turns Ratio
    • Lower Primary Resistance
    • Bolt-In replacement coil
    • Produce More Output Voltage
    • Smooth Idle
    See More

    Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)

    High Performance Ignition Module for GM HEI Distributors

    from

    $69.99
    This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

    Product Features:
    • Fits Most Stock And Modified Distributors
    • Solid State Electronics
    • Dwell Control Circuit
    See More

    Accel – 8Mm Super Stock Spiral Cust Bk (Part No.5114K)

    8Mm Super Stock Spiral Cust Bk

    from

    $91.99
    The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

    Product Features:
    • 500 Ohms/ft Of Resistance
    • 550 F Rated Silicone Jacket
    • Stainless Steel Plug Terminals
    • High RFI Suppression For Street And Strip Use
    • Custom-fit Universal And Import Coverage
    • High-strength Fiberglass Braid Construction
    • Pre And Post HEI Vehicles
    • 7mm And 8mm High Gloss Silicone Jacket
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

    Crank Trigger Kit; Small Block Chevy; 6? Balancer

    from

    $461.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • 6.25 in. Diameter
    • Absolutely the most accurate way to trigger the ignition.
    • The non-magnetic pickup cannot be false triggered.
    • Powerful magnets are embedded in a billet aluminum trigger wheel.
    See More

    MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

    Trigger Wheel; Flying Magnet; Small Block Chevy

    from

    $290.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • Replacement crank trigger wheel for small block Chevy
    • Absolutely the most accurate way to trigger the ignition
    • The non-magnetic pickup cannot be false triggered
    • Powerful magnets are embedded in a billet aluminum trigger wheel
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

    Mod HEI Dust Cover, V8 & Odd Fire V6

    from

    $72.99
    Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

    Product Features:
    • Externally mounted coil
    • Increases reliability
    • Increase performance
    • High quality plastic
    • Resist spark loss
    • Use brass conductors
    • Low resistance connections
    • No modifications
    See More

    Top Picks for 1987 Chevrolet R20 Performance Oil Filters

    Upgrade Chevrolet R20s with top-quality Performance Oil Filters parts, including 3 OEM and aftermarket selections for your 1987 model.

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Mr. Gasket – Enhancement Products (Part No.2060)

    Enhancement Products

    from

    $10.49
    This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.

    Product Features:
    • Internally battled
    • High-porosity filter
    • Ideal for high performance
    • Includes rubber grommet
    See More

    Mr. Gasket – Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up (Part No.2063)

    Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up

    from

    $12.99
    This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

    Product Features:
    • Chrome plated steel
    • Fits stock factory oil filler tubes
    • Features side PCV hook up tube
    • Includes Rubber Grommet
    See More

    In-Demand Performance Distributors for 1987 Chevrolet R20s

    Select from 16 premium Performance Distributors parts for your 1987 Chevrolet R20, with prices ranging from $10.99 to $469.99.

    PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

    D9001 Flame-Thrower HEI Distributor Advance Curve Kit

    from

    $26.99
    Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

    Product Features:
    • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
    • Precision machined chromoly weights and center plate.
    See More

    Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4HP)

    Tst GM 87-95 5.0/5.7L Tbi

    from

    $241.99
    Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

    Product Features:
    • Includes Everything Needed
    • Resistance High Dielectric Strength Compounds
    • Race Proven
    • Improved Performance
    • Reduced Emissions
    See More

    MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

    Distributor Cap; GM HEI; Red

    from

    $49.49
    The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

    Product Features:
    • Stock GM HEI replacement distributor cap
    • Red
    See More

    MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

    Distributor Cap and Rotor; GM HEI Distributor; Red

    from

    $46.49
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Designed w/Performance In Mind
    • High Quality Material
    • Stainless Terminals
    • Performance replacement part
    See More

    MSD Ignition – High-Performance Distributor Cap & Rotor Replacement Kit (Part No.8406)

    High-Performance Distributor Cap & Rotor Replacement Kit

    from

    $49.49
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Fits stock distributor
    • High quality material
    • Brass terminals
    • High dielectric properties
    See More

    Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

    Dist:Chev V8 Hei Vac W/Coil

    from

    $210.99
    Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

    Product Features:
    • Direct Plug In Factory Replacement Plug And Play
    • CNC Machined 6061 T6 Billet Aluminum Housing
    • High Dielectric Strenght Thermoplastic Cap With Br
    • 4 Topin Module With Dwell Control Triggers At 75 R
    • Easy Access Fully Adjustable Mechanical Advance
    • Adjustable Vacuum Advance
    • Includes Performance Coil
    • Fit non computerized vehicles
    See More

    PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

    D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor

    from

    $30.99
    Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

    Product Features:
    • PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
    • Premium quality wire harness and capacitor.
    See More

    Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4)

    Tst GM 87-95 5.0/5.7L Tbi

    from

    $224.99
    Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

    Product Features:
    • Complete Super Tune Kit
    • 8mm Spiral Core Wires
    • Accel Classic Core Plugs
    • High Performance Cap And Rotor
    • Reduced Emissions
    See More

    MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

    Distributor; Chevy V8 with Internal Module

    from

    $469.99
    The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

    Product Features:
    • Simple and clean three wire installation
    • Supplied w/An HEI Style Distributor Cap And Rotor
    • Accepts Cap-A-Dapts
    • Does not require an MSD Ignition Control
    • CARB E.O. Approved
    • Now includes built-in Rev Limiter
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    See More

    MSD Ignition – Distributor Cap and Rotor; GM 4.3L; External Coil (Part No.8430)

    Distributor Cap and Rotor; GM 4.3L; External Coil

    from

    $48.49
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Designed w/performance in mind
    • High quality; voltage insulating material
    • Stainless Terminals
    • High dielectric properties
    See More

    MSD Ignition – Rotor; GM HEI (Part No.8410)

    Rotor; GM HEI

    from

    $13.29
    Replacement rotor for Chevrolet HEI style distributors.

    Product Features:
    • For HEI distributors
    • Resist carbon tracking
    • Low resistance brass
    • Max voltage transfer
    • Molded from insulated material
    See More

    PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

    D700700 Advance Spring Kit Flame-Thrower Billet Distributor

    from

    $20.99
    Performance mechanical advance springs.

    Product Features:
    • PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
    • Performance mechanical advance springs.
    See More

    PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)

    D660701 Rotor Flame-Thrower Billet Distributor

    from

    $18.99
    Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

    Product Features:
    • PerTronix D660701 Rotor Flame-Thrower Billet Distributor
    • Rotor for Flame-Thrower cast distributors
    See More

    PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

    D4061 Flame-Thrower HEI Distributor Rotor Red

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

    D4062 Flame-Thrower HEI Distributor Rotor Blue

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

    D4260 Flame-Thrower Distributor Rotor HEI/EST Black

    from

    $10.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    Most Sold 1987 Chevrolet R20 Performance Exhaust Products

    Explore our best-selling Chevrolet parts for the 1987 R20 among 29 OEM and aftermarket options starting from $20.99.

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

    Exhaust Manifold Gasket Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

    Real-Seal; Header Gasket

    from

    $85.39


    Product Features:
    • Water/Weather Resistant
    • Re-Useable
    • Will Not Burn Or Blow Out
    • Suitable For Port-Matching
    • Made In USA
    See More

    Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

    Performance Exhaust Gasket Set for Enhanced Sealing and Durability

    from

    $20.99
    Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

    Product Features:
    • Manufactured from high-temperature acrylic blend exhaust material
    • Provides excellent sealing and durability
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Resists Deteriorating
    • Provides Excellent Torque Retention
    See More

    Mr. Gasket – Aluminum Exhaust Gaskets for Intense Heat Resistance (Part No.7402G)

    Aluminum Exhaust Gaskets for Intense Heat Resistance

    from

    $42.99
    Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

    Product Features:
    • Withstands Intense Exhaust Heat
    • Reusable header, exhaust manifold and collector flange gaskets
    • Manufactured from “dead soft” aluminum layers – .125″ thick
    • Easy Removal For Disassembly
    • Conforms easily to surface irregularities (warped flanges)
    • Compresses down to 0.060″ to create a tight leak-proof seal
    • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
    • For high performance street, drag race and oval track use
    See More

    Flowtech – Ceramic Header (Part No.31500FLT)

    Ceramic Header

    from

    $469.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Ceramic Headers
    • Rust And Corrosion Resistance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

    from

    $42.99
    Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

    Product Features:
    • Withstands Intense Exhaust Heat
    • Reusable header, exhaust manifold and collector flange gaskets
    • Resists Deteriorating
    • Manufactured from “dead soft” aluminum layers – .125″ thick
    • Easy Removal For Disassembly
    • Conforms easily to surface irregularities (warped flanges)
    • Compresses down to 0.060″ to create a tight leak-proof seal
    • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
    • For high performance street, drag race and oval track use
    See More

    Dynomax – Super Turbo Muffler Uni Fit Aluminized Steel 19" L, 2.5" In, 2.5" Out, Oval (Part No.17758)

    Super Turbo Muffler Uni Fit Aluminized Steel 19" L, 2.5" In, 2.5" Out, Oval

    from

    $109.99
    DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.

    Product Features:
    • Large internal flow tubes improve exhaust flow and reduce backpressure
    • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
    • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
    • Dyno proven to flow up to 700 SCFM
    See More

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7158)

    Copper Seal; Exhaust Gasket Set

    from

    $60.29
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More

    Mr. Gasket – Exhaust Gasket Set (Part No.150)

    Exhaust Gasket Set

    from

    $30.19
    Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

    Product Features:
    • High-Temperature Exhaust Material
    • Withstands Extreme Exhaust Heat
    • Provides Excellent Sealing And Durability
    • Superior Tensile Strength
    • Resists Deteriorating
    • Provides Excellent Torque Retention
    See More

    Hooker Headers – Super Competition Header Gasket (Part No.10809HKR)

    Super Competition Header Gasket

    from

    $23.29
    Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

    Product Features:
    • Tear Resistant
    • Precisely Cut To Match Header
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)

    Exhaust Manifold Gasket Set

    from

    $42.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1410)

    Exhaust Manifold Gasket Set

    from

    $37.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

    Exhaust Manifold Gasket Set

    from

    $27.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17234)

    Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval

    from

    $272.99
    DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

    Product Features:
    • Stainless steel construction for lifelong protection
    • 100% welded design for maximum durability
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
    See More

    Flowtech – Ceramic Header (Part No.31530FLT)

    Ceramic Header

    from

    $463.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Ceramic Headers
    • Rust And Corrosion Resistance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7157)

    Copper Seal; Exhaust Gasket Set

    from

    $60.29
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More

    Mr. Gasket – Exhaust Gasket Set (Part No.152)

    Exhaust Gasket Set

    from

    $36.49
    Mr. Gasket’s Performance Header Gaskets are manufactured from a heavy duty high-temperature material, .062 inch? thick, consisting of an acrylic binder system to resist high temperature. Provides excellent sealing and durability with maximum torque retention to eliminate gasket failure. While precision die-cut for an excellent fit, it can be trimmed if necessary for modified port applications. For OE replacement, higher performance street, drag race and oval track use.brbrFits Chevrolet 396,402,427,454 Gen IV Big Blocks with Round Ports up to 1.92 inches in diameter.

    Product Features:
    • Provides excellent sealing and durability.
    • Precision die-cut for an excellent fit
    • Manufactured from high-temperature acrylic blend exhaust material
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    See More

    Spectre – Alternator Bracket (Part No.4719)

    Alternator Bracket

    from

    $30.99
    This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

    Product Features:
    • Fits Big Block Chevy engines with a long water pump from 1969 and later
    • Manufactured from high quality steel
    • Upper bracket for passenger side mounting
    • Features a triple chrome-plated finish
    • Stock replacement part
    See More

    Hooker Headers – Super Comp. Header (Part No.2841-1HKR)

    Super Comp. Header

    from

    $1231.00
    Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • Long Tube Lengths
    • Long Transition Collectors
    • Monstrous Low-Mid Range Torque
    • Keep Top End Horsepower
    • Provides Finest Fit
    • Most Durable Design Available
    See More

    Hooker Headers – Super Comp. Header (Part No.2840-1HKR)

    Super Comp. Header

    from

    $1151.00
    Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • Long Tube Lengths
    • Long Transition Collectors
    • Monstrous Low-Mid Range Torque
    • Keep Top End Horsepower
    • Provides Finest Fit
    • Most Durable Design Available
    See More

    Hooker Headers – Super Comp. Header (Part No.2841HKR)

    Super Comp. Header

    from

    $893.99
    Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • Long Tube Lengths
    • Long Transition Collectors
    • Monstrous Low-Mid Range Torque
    • Keep Top End Horsepower
    • Provides Finest Fit
    • Most Durable Design Available
    See More

    Hooker Headers – Super Comp. Header (Part No.2840HKR)

    Super Comp. Header

    from

    $824.99
    Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • Long Tube Lengths
    • Long Transition Collectors
    • Monstrous Low-Mid Range Torque
    • Keep Top End Horsepower
    • Provides Finest Fit
    • Most Durable Design Available
    See More

    Flowtech – Standard Header (Part No.11500SFLT)

    Standard Header

    from

    $415.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Flowtech – Real-Seal; Header Gasket (Part No.99153FLT)

    Real-Seal; Header Gasket

    from

    $85.39


    Product Features:
    • Water/Weather Resistant
    • Re-Useable
    • Will Not Burn Or Blow Out
    • Suitable For Port-Matching
    • Made In USA
    See More

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7151)

    Copper Seal; Exhaust Gasket Set

    from

    $60.29
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7150)

    Copper Seal; Exhaust Gasket Set

    from

    $59.99
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More

    Mr. Gasket – Exhsthdrgskt (Part No.7652G)

    Exhsthdrgskt

    from

    $51.99
    Header Installation Kit – Chevrolet V8 1955-1991 265-400 Oval Port. Includes gaskets and fasteners necessary for header installation. Made using premium Ultra-Seal exhaust and collector gaskets. Mr. Gasket header and collector bolts deliver necessary clamp-load to seal flange mating surfaces.

    Product Features:
    • Oval Port Header Gaskets
    • Port Size 1.50″ x 1.82″
    • Collector Gasket 3.00″ Diam. 3-bolt Style
    • Includes Header & Collector Bolts
    See More

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5911)

    Ultra Seal: Exhaust Gasket Set

    from

    $38.59
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Has A Steel Core With Graphite Facing
    • Graphite Facing Has Excellent Thermo-conductivity
    • Can Be Trimmed If Necessary For Modified Port App
    See More

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5913)

    Ultra Seal: Exhaust Gasket Set

    from

    $37.69
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-temperature steel core/graphite faced exhaust material
    • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
    • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
    • Conforms to and seals minor surface irregularities
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Anti-Stick Properties
    • Easy Removal For Disassembly
    See More

    Top-Rated Performance and Racing Products Brands For Your 1987 Chevrolet R20

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1987 Chevrolet R20s. Below you’ll find some of our best rated Performance and Racing Products from K&N, Mr. Gasket, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1987 R20 start at just $10.49 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular K&N 1987 Chevrolet R20 Performance and Racing Products

    When it comes to maintaining or upgrading your 1987 Chevrolet R20, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1987 Chevrolet R20. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 35 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Popular Mr. Gasket 1987 Chevrolet R20 Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1987 Chevrolet R20 owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1987 R20, Advance Auto Parts carries a full inventory of 50 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $10.49 to $197.99, plus, with more than 41 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Thermocap Radiator Cap
    from
    $48.09
    This product is not rated

    Thermocap Radiator Cap

    “”

    Oil Pan Bolt Kit
    from
    $17.49
    This product is not rated

    Oil Pan Bolt Kit

    “”

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
    from
    $42.99
    This product is not rated

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

    “”

    FAQs for 1987 Chevrolet R20 Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1987 Chevrolet R20s?

    Out of 221 Performance and Racing Products that fit 1987 Chevrolet R20s, the following parts are the top sellers:

    What’s the price range for 1987 Chevrolet R20 Performance and Racing Products?

    Performance and Racing Product prices for the 1987 Chevrolet R20 start at $10.49 and go up to $1,322.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1987 Chevrolet R20?

    The average price for Performance and Racing Products for the 1987 Chevrolet R20 is $253.70. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet R20 model years?

    Yes, we currently carry Performance and Racing Products for 1 model years of Chevrolet R20s between 1988 and 1988. Performance and Racing Products are bought most frequently for the following model years: 1988.

    What are the cheapest Performance and Racing Products for my 1987 Chevrolet R20?

    The cheapest 1987 Chevrolet R20 Performance and Racing Products we carry in stock are:

    Can I get help with 1987 Chevrolet R20 Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

    What is your return policy for Chevrolet R20 Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Chevrolet R20 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.