1987 Chevrolet Corvette Performance and Racing Products

Find Your Specific 1987 Chevrolet Corvette Performance and Racing Products

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1987 Corvette. Advance Auto Parts has popular Corvette parts like Performance Engines, Performance Ignition Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Corvette model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 1987 Chevrolet Corvette Performance and Racing Products below and start saving instantly.

Popular 1987 Chevrolet Corvette Performance and Racing Products Categories

Performance Oil Filters
Performance Oil Filters
Performance Intake Manifolds
Performance Intake Manifolds
Computer Chip Programmers
Computer Chip Programmers
Performance Coils
Performance Coils
Performance Distributor Cap and Rotor Kits
Performance Distributor Cap and Rotor Kits
Performance Computer Prom and Chips
Performance Computer Prom and Chips
Performance Shifters
Performance Shifters
Performance Distributors
Performance Distributors
Performance Valve Covers
Performance Valve Covers
Performance Exhaust System Kits
Performance Exhaust System Kits
Performance Water Outlet Gaskets
Performance Water Outlet Gaskets
Performance Engine and Transmission Mounts
Performance Engine and Transmission Mounts

Essential Performance and Racing Products for 1987 Chevrolet Corvettes

PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

D9001 Flame-Thrower HEI Distributor Advance Curve Kit

from

$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

Product Features:
  • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
  • Precision machined chromoly weights and center plate.
See More

(1 reviews)
View Product

Energy Suspension – Hyper-Flex System (Part No.3.18122R)

Hyper-Flex System

from

$346.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More
View Product

Edelbrock – Performer Small-Block Chevy Cylinder Head Hydraulic Flat Tappet (Part No.60879)

Performer Small-Block Chevy Cylinder Head Hydraulic Flat Tappet

from

$1028.99
Product Features:
  • Designed for 1986-91 Tuned Port Injection 5.7L Small-Block Chevy Corvette engines originally equipped with center bolt valve covers
  • Flat Tappet Camshaft Type
  • 60cc combustion chamber with 165cc intake port
  • Intake valve measures 2.02 and the exhaust measures 1.60
  • Sold as one complete head
See More
View Product

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More
View Product

Mr. Gasket – Rear Main Seal Gasket (Part No.29)

Rear Main Seal Gasket

from

$42.49
This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

Product Features:
  • Repairs That Leaky Rear Main Sail
  • Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
  • Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
  • Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
See More
View Product

Dynomax – Super Turbo Dual System (Part No.17483)

Super Turbo Dual System

from

$326.99
DynoMax Performance Exhaust is a leading performance exhaust brand built on over 25 years of market leadership. Each and every DynoMax product is backed by engineers who know what you want and expect out of a performance exhaust product… and who exceed your expectations every time.
See More
View Product

Powertrax – No-Slip Traction System (Part No.9207853005)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
    • See More
    View Product

    MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31249)

    Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor

    from

    $126.99
    The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

    Product Features:
    • Less than 50 ohms per foot for superior spark
    • Ferro-magnetic impregnated core creates an effective EMI choke
    • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
    • For high EMI suppression
    • Conductor core features Dupont Kevlar material
    • Proprietary compound sleeves for resistance to high heat/abrasion
    See More

    (2 reviews)
    View Product

    MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

    Crank Trigger Kit; Small Block Chevy; 6? Balancer

    from

    $461.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • 6.25 in. Diameter
    • Absolutely the most accurate way to trigger the ignition.
    • The non-magnetic pickup cannot be false triggered.
    • Powerful magnets are embedded in a billet aluminum trigger wheel.
    See More
    View Product

    Energy Suspension – Performance Polyurethane Motor Mount for GM Vehicles (Part No.3.1114R)

    Performance Polyurethane Motor Mount for GM Vehicles

    from

    $57.99
    A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

    Product Features:
    • Gains Both Performance and Longevity
    • Will Handle Any and All Torque
    • Out Lasts Rubber
    See More

    (1 reviews)
    View Product

    Spectre – Aluminum Swivel Water Neck (Part No.4930)

    Aluminum Swivel Water Neck

    from

    $39.99
    Spectre’s polished aluminum swivel water neck provides an easy and affordable way to give your engine a clean and professional appearance. This 360 degree swivel water neck has a 45 degree angle. It is for Chevrolet V8 small block vehicles. Part includes O-ring seal and allen head bolts.

    Product Features:
    • Polished aluminum
    • Brings a professional, custom look
    • Bolts included
    • Precision engineered for optimum fit and function
    • O-ring included
    See More

    (1 reviews)
    View Product

    Energy Suspension – Strut Rod Bushing Set (Part No.3.7102G)

    Strut Rod Bushing Set

    from

    $51.99
    These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

    Product Features:
    • Made from HYPER-Flex Polyurethane
    See More
    View Product

    Edelbrock – Water Pump for 1971-74 Big-Block Chevy Corvettes in Polished Finish (Part No.8862)

    Water Pump for 1971-74 Big-Block Chevy Corvettes in Polished Finish

    from

    $444.99
    Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

    Product Features:
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency
    See More
    View Product

    B & M – Transpak For 82-93 TH700R4 Transmission (Part No.70235)

    Transpak For 82-93 TH700R4 Transmission

    from

    $174.99
    The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

    Product Features:
    • Recalibrate Auto. Transmission
    • Optimum Performance
    • Select Your App. Mode
    • Improves Transmission Life
    • Trans. Removal Not Required
    • Downshift At Any Speed
    • Great For Trailer Towing
    • For Heavy Loads Driving Downhill
    See More
    View Product

    Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)

    VALVE SPRINGS, 1.310" BEEHIVE 1 ST

    from

    $594.99
    With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

    Product Features:
    • Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
    • O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
    • Designed for hydraulic roller cams
    • .625″ maximum lift, 1.310″ O.D.
    • Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
    See More
    View Product

    MSD Ignition – Distributor Cap and Rotor; MSD/GM V8 Points (Part No.8442)

    Distributor Cap and Rotor; MSD/GM V8 Points

    from

    $49.49
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Fits MSD/GM V8 Distributors
    • Made from high quality materials
    • Brass terminals
    • High dielectric properties
    See More

    (7 reviews)
    View Product

    Hypertech – Street Runner Power Computer Chip, Cast Iron Head (Part No.156371)

    Street Runner Power Computer Chip, Cast Iron Head

    from

    $242.89
    Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

    Product Features:
    • Designed For Daily Street Driving
    • For Unmodified Vehicles w/Stock Thermostat
    • Controls Engines Air/Fuel Ratio
    • Controls Spark Advance For Max Power
    • Potential Gas Mileage Improvements
    • No Wiring Or Soldering Required
    • Installs In Less Than 30 Minutes
    See More
    View Product

    Spectre – Aluminum Timing Pointer (Part No.4936)

    Aluminum Timing Pointer

    from

    $64.99
    Spectre’s timing tabs have an adjustable timing pointer to allow for a more accurate reading and they can work with any size harmonic balancer. Designed for Chevy small block engines, Spectre’s adjustable timing tabs have a polished aluminum finish so it will look great under your hood.

    Product Features:
    • Polished aluminum finish
    • Designed for Chevy small block engines
    • Adjustable pointer allows for use with 6, 7, and 8 In. harmonic balancers
    • Installs easily where original tab mounts
    See More
    View Product

    Mr. Gasket – Intake Bolt Kit (Part No.5003)

    Intake Bolt Kit

    from

    $75.99
    Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

    Product Features:
    • Chrome plated
    • Grade 8
    • 12-point head
    • AN washers with no exposed shoulder for a professional appearance
    See More
    View Product

    Hurst – Installation Kit For Competition Plus Shifter (Part No.3733162)

    Installation Kit For Competition Plus Shifter

    from

    $289.99
    Installation Kit for Hurst Competition plus shifter. Includes all linkage pieces needed to complete the installation of your Hurst Shifter.

    Product Features:
    • Competition Plus Shifter Installation Kit
    • Includes Hardware
    • Durable
    • Sold as a Kit
    • Hurst Quality
    See More
    View Product

    Dynomax – Chevrolet Corvette Y-Pipe Exhaust System Kit (Part No.88033)

    Chevrolet Corvette Y-Pipe Exhaust System Kit

    from

    $140.99
    Designed to replace the stock catalytic converter pipe assembly, the DynoMax? Y-pipe kit bolts directly to the stock manifold and is fixture checked to ensure a precise fit for quick and easy installation.

    Product Features:
    • COMPATIBILITY — Designed for 1986-91 Chevrolet Corvette 5.7L V8 (excludes ZR1)
    • FLEXIBLE SOLUTION — Features O.D. sized inlets and outlets for easy fabrication of custom exhaust systems
    • IMPROVED FLOW CAPACITY — Mandrel bends improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
    • PREMIUM MATERIALS — Made from quality 16-gauge aluminized steel for durability and long life
    • PREMIUM MATERIALSÿ–ÿMade from quality 16-gauge aluminized steel for durability and long life
    • BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with DynoMax? pipe
    • BETTER TOGETHER — Use premium DynoMax? accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
    • WARNING — Intended for on-track/off-road use only; not emission legal for vehicles driven on the street; for use with long tube headers
    See More
    View Product

    MSD Ignition – Distributor; Billet GM HEI (Part No.8365)

    Distributor; Billet GM HEI

    from

    $594.99
    The Chevrolet HEI distributor is a favorite for muscle cars, street rods and even circle track racers. The integrated coil keeps under mount wiring clean, and for race cars, the idea of running one wire to the distributor keeps things simple. However, when it comes to performance, the stock HEI falls short. MSD answers the need for a strong, accurate and high performance HEI with our Pro-Billet HEI. The distributor is supplied with our digital HEI module and coil so there is plenty of spark energy combined with improved dwell and timing control. Tig welded on top of the distributor shaft is MSD’s adjustable centrifugal advance assembly. Three sets of springs and four stop bushings let you dial in up to 24 different timing curves to match your driving needs. Plus, there’s a vacuum advance for those concerned with economy. All of this is assembled around a precision and great looking CNC machined housing.

    Product Features:
    • Complete performance HEI distributor upgrade for Chevy V8 engines
    • Supplied w/Brass Terminal Distributor Cap And Rotor
    • Full Spark Energy Output To 9000 Rpm
    • An 8.5 amp; single spark; inductive discharge ignition module
    • Includes MSD PN[83647] and MSD HEI Coil PN[8225]
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    See More
    View Product

    Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

    Oil Pan Bolt Kit

    from

    $17.49
    The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

    Product Features:
    • Ideal For Tight Spaces
    • Serrations Prevent Loosening
    • Flange Distributes Pressure
    • Zinc Plated Bolts
    • Grade 5 Material
    • Easy Installation
    See More
    View Product

    MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

    Mod HEI Dust Cover, V8 & Odd Fire V6

    from

    $72.99
    Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

    Product Features:
    • Externally mounted coil
    • Increases reliability
    • Increase performance
    • High quality plastic
    • Resist spark loss
    • Use brass conductors
    • Low resistance connections
    • No modifications
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5193G)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1802)

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set

    from

    $25.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More
    View Product

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

    Engine Valve Cover Gasket Set

    from

    $25.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Die cut silicone rubber gaskets conform to out-of-flat covers
    • Great for on-again/off-again situations
    • Not intended for use in emission controlled vehicles.
    See More
    View Product

    Edelbrock – Pushrod Set for S/B Chevy (Part No.9653)

    Pushrod Set for S/B Chevy

    from

    $191.99
    Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

    Product Features:
    • 7.2 in. Length
    • 0.312 in. Diameter
    • 4130 Chromoly Steel Material
    • Black Oxide Finish
    • Made In The USA
    See More
    View Product

    Upgrade your 1987 Chevrolet Corvette with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1987 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 168 Performance and Racing Products for the 1987 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1987 Chevrolet Corvette at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,070.00, with an average price of $168.70. Our 168 Performance and Racing Products in stock come from 23 trusted brands, so you’re sure to find the right part for your 1987 Chevrolet Corvette without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Chevrolet Corvette, we stock popular OEM and aftermarket Performance and Racing Products from top names like B & M, FEL-PRO Performance, Accel, and more. B & M Performance and Racing Products start at just $269.99 and boast an impressive 4.1 stars average rating from customers. FEL-PRO Performance and Accel also bring quality to the table, with Performance and Racing Products available starting at $31.49, and at an average 4.0 stars rating. With 222 customer reviews and counting, our 1987 Chevrolet Corvette Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 1987 Chevrolet Corvette!

    Best-Selling Performance Engines for 1987 Chevrolet Corvettes

    Enhance the driving experience in your Chevrolet with 67 quality Performance Engine components, starting at $7.99.
    show more show less

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    (1 reviews)
    View Product

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $52.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    (1 reviews)
    View Product

    Spectre – Chevrolet Small Block V8 Harmonic Balancer Bolt Kit (Part No.4699)

    Chevrolet Small Block V8 Harmonic Balancer Bolt Kit

    from

    $7.99
    Spectre’s Harmonic Balancer Bolt Kit is designed to fit Chevrolet Small Block 265-400 V8 engines. This grade 8 bolt is 2-1/2 inches long, and features a plated finish for corrosion resistance. This kit also includes a security lock washer.

    Product Features:
    • Fits Chevrolet Small Block 265-400 V8 engines
    • Features a corrosion resistant plated finish
    • Gold iridite finish
    • Grade 8 bolt, 7/16 inch-20 by 2-1/2 inches
    • Includes security lock washer
    See More

    (1 reviews)
    View Product

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

    Engine Valve Cover Gasket Set

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    (1 reviews)
    View Product

    Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

    Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

    from

    $329.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke; Waterneck; and HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes
    See More

    (1 reviews)
    View Product

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $151.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Non-Rotator Style: Dyno Tested and Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    (1 reviews)
    View Product

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Die cut silicone rubber gaskets conform to out-of-flat covers
    • Great for on-again/off-again situations
    • Not intended for use in emission controlled vehicles.
    See More

    (1 reviews)
    View Product

    Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

    Premium Quality Thermostat Gasket with Solid Aluminum Carrier

    from

    $31.99
    Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

    Product Features:
    • Edge Molded Rubber Water Outlet Gasket Is Reusable
    • Requires No Gasket Sealer
    • Solid Aluminum Carrier For Strength/rigidity
    • Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled
    See More

    (6 reviews)
    View Product

    Mr. Gasket – Intake Manifold Bolts (Part No.955G)

    Intake Manifold Bolts

    from

    $15.49
    These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

    Product Features:
    • Grade 5 socket head bolts are zinc plated for protection and appearance
    • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
    • Washers Included
    See More

    (12 reviews)
    View Product

    Weiand – Action Plus Water Pumps (Part No.9240P)

    Action Plus Water Pumps

    from

    $215.99
    Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

    Product Features:
    • Twisted Snout Water Pump Design For Updated Style
    • Street Performance
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six-Blade Stamped Steel
    • Anti-Cavitation Impeller
    • 100 Percent Leak Tested
    See More

    (3 reviews)
    View Product

    Weiand – Action Plus Water Pumps (Part No.9208P)

    Action Plus Water Pumps

    from

    $215.99
    Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

    Product Features:
    • Twisted Snout Water Pump Design For Updated Style
    • Street Performance
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six-Blade Stamped Steel
    • Anti-Cavitation Impeller
    • 100 Percent Leak Tested
    See More

    (2 reviews)
    View Product

    Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7801)

    Performer-Link Adjustable True-Roller Timing Chain Set

    from

    $80.99


    Product Features:
    • Solid Bushing Chain Resists Stretching
    • For Use with Stock or Edelbrock Camshafts
    • Stressproof Steel Crank Gears
    • 3 Keyway Setting Points To Ensure Accurate Timing
    • True Bearing Surface Rolls with the Sprockets
    • For OEM Hydraulic Roller Lifter Cams Only
    See More

    (2 reviews)
    View Product

    B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

    Tork Master 2000: Value-Priced Street Performance Torque Converter

    from

    $414.99
    Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    (1 reviews)
    View Product

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    (1 reviews)
    View Product

    Mr. Gasket – Valve Cover Gasket Set (Part No.168)

    Valve Cover Gasket Set

    from

    $42.49
    Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevy 5.0, 5.7L Vortec V8 with center bolt valve covers.

    Product Features:
    • Manufactured from high-density cork/rubber blend gasket material
    • Provides excellent sealing and durability
    • For OE replacement, high performance street, drag race and oval track
    See More
    View Product

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More
    View Product

    Mr. Gasket – Ultra Seal Iii: Intake Gasket (Part No.5851)

    Ultra Seal Iii: Intake Gasket

    from

    $48.49
    Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals, distributor gasket and upper TPI (tuned port injection) manifold gaskets.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Silicone beading on both sides of each gasket
    • Complete with manifold end seals and distributor gasket
    • For OE replacement, high performance street, drag race and oval track use
    • Creates Tight Leak proof Seal
    See More
    View Product

    Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

    Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

    from

    $65.99
    Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More
    View Product

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)

    PERFORMANCE OIL PAN GASKET SET

    from

    $63.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
    • Not intended for use in emission controlled vehicles.
    See More
    View Product

    Mr. Gasket – Intake Gasket Tpi Upper Tube (Part No.145)

    Intake Gasket Tpi Upper Tube

    from

    $42.49
    Mr. Gasket Performance intake gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For OE replacement, high performance street, drag race and oval track. Includes gaskets for the TPI intake runners where they attach at the lower intake manifold base and at the plenum, plus the gasket for the throttle body. Does not include the intake manifold to cylinder head gaskets.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material.
    • Provides excellent sealing and durability.
    • Can be trimmed if necessary for modified port applications.
    • Complete with manifold end seals and distributor gasket.
    • For OE replacement, high performance street, drag race and oval track use.
    See More
    View Product

    Mr. Gasket – Precision Timing Tape (Part No.1588)

    Precision Timing Tape

    from

    $21.79
    Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

    Product Features:
    • 6 3¿4″ diameter
    • 6 3┐4″ diameter
    • 305, 350 cu. in. 1969-93
    • Increased Performance
    • Set Valve Lash At Proper Time
    See More
    View Product

    FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

    Engine Timing Cover Gasket

    from

    $20.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Steel core gasket construction
    • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
    • Not intended for use in emission controlled vehicles.
    See More
    View Product

    Mr. Gasket – Rear Main Seal Gasket (Part No.29)

    Rear Main Seal Gasket

    from

    $42.49
    This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

    Product Features:
    • Repairs That Leaky Rear Main Sail
    • Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
    • Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
    • Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
    See More
    View Product

    Mr. Gasket – Mls Head Gasket (Part No.3130G)

    Mls Head Gasket

    from

    $111.99
    Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

    Product Features:
    • Gasket bore – 4.060″ Thickness – .040″
    • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
    • Optimized sealing embossments seals extreme cylinder pressure
    • Provides excellent stability and reduces cylinder bore distortion.
    • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
    • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
    • For high-performance street, drag race and oval track use
    See More
    View Product

    Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)

    Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height

    from

    $126.99
    Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

    Product Features:
    • Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
    • O.D.: 1.254″, I.D.: .880″
    • Single valve springs with damper
    • Approximately .490″ max lift at recommended installed height
    See More
    View Product

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

    Ultra Seal: Head Gasket

    from

    $68.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More
    View Product

    Mr. Gasket – Intake Gasket (Part No.116)

    Intake Gasket

    from

    $40.19
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material.
    • Provides excellent sealing and durability.
    • Can be trimmed if necessary for modified port applications.
    • Complete with manifold end seals and distributor gasket.
    • For OE replacement, high performance street, drag race and oval track use.
    See More
    View Product

    FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

    Engine Crankshaft Seal Kit

    from

    $37.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    See More
    View Product

    Mr. Gasket – Intake Gasket (Part No.101B)

    Intake Gasket

    from

    $28.99
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Can be trimmed if necessary for modified port applications
    • Complete with manifold end seals and distributor gasket where applicable
    • For OE replacement, high performance street, drag race and oval track use
    See More
    View Product

    Edelbrock – Water Pump for Small-Block 1984-91 350 c.i.d. Corvettes in Satin Finish (Short) (Part No.8815)

    Water Pump for Small-Block 1984-91 350 c.i.d. Corvettes in Satin Finish (Short)

    from

    $333.99
    Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

    Product Features:
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency
    See More
    View Product

    Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

    Pushrod Set for S/B Chevy

    from

    $187.99


    Product Features:
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates
    See More
    View Product

    Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

    Ultra Seal: Screw-In Rocker Arm Studs

    from

    $65.99
    Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

    Product Features:
    • Black Oxide Coated Grade 8 Steel
    • Kit Contains 16 Studs
    • Easy To Install
    • Heat Treated Steel
    • Grade 8 Steel
    See More
    View Product

    Mr. Gasket – Intake Gasket (Part No.143)

    Intake Gasket

    from

    $42.49
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Die-cut for an excellent fit
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    See More
    View Product

    Edelbrock – Intake Manifold replacement base to top gasket (Part No.6999)

    Intake Manifold replacement base to top gasket

    from

    $17.99
    Replacement gasket for top to bottom. See PN(7110) complete. PN(7067) bottom. PN(7032) top. Includes base and top for intake manifold PN(7110).

    Product Features:
    • Replacement Gasket for Top to Bottom
    • See PN[7110]Complete; PN[7067]Bottom; PN[7032] Top
    See More
    View Product

    Mr. Gasket – Timing Cover Seal (Part No.18)

    Timing Cover Seal

    from

    $15.99
    If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.

    Product Features:
    • Nitrile Rubber And High Density Cork
    • Will Not Shrink Or Stick
    See More
    View Product

    Edelbrock – Intake Manifold replacement top gasket (Part No.6988)

    Intake Manifold replacement top gasket

    from

    $24.99
    Product Features:
    • Replacement Gasket For PN[7070] Edelbrock Intake
    • One Gasket Only
    See More
    View Product

    Edelbrock – Performer Small-Block Chevy Cylinder Head Hydraulic Flat Tappet (Part No.60879)

    Performer Small-Block Chevy Cylinder Head Hydraulic Flat Tappet

    from

    $1028.99
    Product Features:
    • Designed for 1986-91 Tuned Port Injection 5.7L Small-Block Chevy Corvette engines originally equipped with center bolt valve covers
    • Flat Tappet Camshaft Type
    • 60cc combustion chamber with 165cc intake port
    • Intake valve measures 2.02 and the exhaust measures 1.60
    • Sold as one complete head
    See More
    View Product

    Edelbrock – XX Performer Small-Block Chevy Cylinder Head Flat Tappet Polished (Part No.608719)

    XX Performer Small-Block Chevy Cylinder Head Flat Tappet Polished

    from

    $1021.99


    Product Features:
    • 50-State Street Legal Aluminum Cylinder Head
    • Out-of-the-Box Bolt-On Performance
    • Hand-Blended Intake and Exhaust Bowls
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces than Other Brands
    • Hardened Tip Stainless Swirl-Polished Valves
    • Heli-Coils Rocker Studs And Exhaust Bolt Holes
    See More
    View Product

    B & M – Torque Converter, Holeshot 3000 (Part No.70421)

    Torque Converter, Holeshot 3000

    from

    $789.99
    The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More
    View Product

    B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

    Torque Converter, Nitrous Holeshot 3600

    from

    $665.99
    Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

    Product Features:
    • 3400-3800 RPM
    • Small And Big Blocks
    • Serious Performance
    • Furnace Brazed
    • Fully Balanced
    See More
    View Product

    Edelbrock – Street Tunnel Ram Small Block Chevy Intake Manifold (Part No.7110)

    Street Tunnel Ram Small Block Chevy Intake Manifold

    from

    $631.99
    For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

    Product Features:
    • For 3500 to 7500 RPM
    • Use Where Low-End Torque is Not a Prime Factor
    • Great For Engines w/Slightly Modified Heads
    • Top Has Vacuum Outlet for Power Brakes
    • Will Accept Forward and Sideways Mounted Carbs
    • Carburetor Center-to-Center Dimensions 8.875 in
    • HEI Ignition Will Not Clear Manifold
    • For Street Mach.; Street Rods; Pro-Street; Marine
    See More
    View Product

    Edelbrock – Performer Intake Manifold for 1987-95 Small-Block Chevy, Polished Finish (Part No.21041)

    Performer Intake Manifold for 1987-95 Small-Block Chevy, Polished Finish

    from

    $627.99
    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke; Waterneck; and HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes
    See More
    View Product

    B & M – Holeshot 2400 (Part No.70419)

    Holeshot 2400

    from

    $609.99
    HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    • New Turbine Hub
    • New Springs/Rollers In Stator
    See More
    View Product

    Edelbrock – Victor Ram 23-Degree Intake Manifold Base for Small-Block Chevy (Part No.7070)

    Victor Ram 23-Degree Intake Manifold Base for Small-Block Chevy

    from

    $576.99
    Product Features:
    • 6500-10000 RPM Range
    • Dual Plane Quad Type – 4150 Style Flange
    • 7.13 in. Front Height, 7.13 in. Center Height, 7.13 in. Rear Height
    • Satin Finish
    • Base Only
    See More
    View Product

    B & M – Torque Converter, Holeshot 2000 (Part No.70417)

    Torque Converter, Holeshot 2000

    from

    $544.99
    The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More
    View Product

    Edelbrock – Super Victor 4500 for Raised Port 23 Degree Intake Manifold Small-Block Chevy (Part No.2971)

    Super Victor 4500 for Raised Port 23 Degree Intake Manifold Small-Block Chevy

    from

    $494.99
    Product Features:
    • 3500-8000 RPM Range
    • Single Plane Type-4500 Style Flange
    • 6.77 in. Front Height, 6.77 in. Center Height, 6.77 in. Rear Height
    • Satin Finish
    • For Raised Port 23 Degree Heads
    See More
    View Product

    Edelbrock – Victor Jr. 23 Degree Tall Intake Manifold Small-Block Chevy (Part No.2999)

    Victor Jr. 23 Degree Tall Intake Manifold Small-Block Chevy

    from

    $463.99
    Edelbrock part #2999 Victor Jr. 23 degree Tall intake manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. This versatile manifold is excellent for many applications from high-performance’s stree

    Product Features:
    • Race Winning Design for all Types of Competition
    • Single Plane Maximizes Torque and Horsepower
    • For Performance in 3500 to 7500 RPM Range
    • Exit Ports Closely Match Unported GM Bowtie Heads
    • Ports Match GM PN[14011058/14011034/10134392]
    • Best for Classes Restricting Porting of Intakes
    • Features 1 in. Taller Carb Pad than PN[2972]
    See More
    View Product

    Holley – Manifold; SBC Late DP TBI EGR (Part No.300-66)

    Manifold; SBC Late DP TBI EGR

    from

    $463.99
    Utilizes late model alternator and A/C bracket mounting provisions. Has vacuum taps off Manifold runners. Uses cable bracket P/N 20-101 for GM 700R4 transmission. Extra installation hardware included.

    Product Features:
    • High Rise Dual Plane Design
    • Holley Pro-Jection Tbi Mounting Flange
    • Erg Provisions
    See More
    View Product

    Most Popular 1987 Chevrolet Corvette Performance Ignition Products

    Customize your Chevrolet with 12 Performance Ignition Products products like Performance Coils, Performance Spark Plug Wires, and Performance Ignition Parts, all priced under $461.99.
    show more show less

    MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

    High Energy Ignition Coil for GM HEI Distributors

    from

    $112.99
    HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    Product Features:
    • Direct performance replacement for GM HEI coil-in-cap dist.
    • 70:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
    See More

    (1 reviews)
    View Product

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    (3 reviews)
    View Product

    Accel – GM Hei Supercoil Red/White (Part No.140005)

    GM Hei Supercoil Red/White

    from

    $113.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Similar to Standard Motor Products SMP Dr-32
    • Long Life And Great Looks
    See More

    (3 reviews)
    View Product

    Accel – GM 1984-95 Remote Supercoil (Part No.140011)

    GM 1984-95 Remote Supercoil

    from

    $79.99
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP DR-37
    • MSD 8226
    • Resist Corrosion
    • W/New Mounting Hardware
    See More

    (15 reviews)
    View Product

    MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with HEI Cap (Part No.35593)

    Wire Set; Black Super Conductor; Small Block Chevy with HEI Cap

    from

    $109.99
    The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

    Product Features:
    • Less than 50 ohms per foot for superior spark
    • Ferro-magnetic impregnated core creates an effective EMI choke
    • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
    • For high EMI suppression
    • Conductor core features Dupont Kevlar material
    • Proprietary compound sleeves for resistance to high heat/abrasion
    See More
    View Product

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More
    View Product

    MSD Ignition – Wire Set; Super Conductor; Chevy Corvette; 350 TPI (Part No.31459)

    Wire Set; Super Conductor; Chevy Corvette; 350 TPI

    from

    $181.99
    The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

    Product Features:
    • Custom Fit For Make And Model Listed
    • Wires Are Pre-Cut To Exact Specifications
    • Bolt-on Performance
    • Conductor core features DuPont Kevlar material for increased tensile strength
    • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
    • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
    See More
    View Product

    MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

    Crank Trigger Kit; Small Block Chevy; 6? Balancer

    from

    $461.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • 6.25 in. Diameter
    • Absolutely the most accurate way to trigger the ignition.
    • The non-magnetic pickup cannot be false triggered.
    • Powerful magnets are embedded in a billet aluminum trigger wheel.
    See More
    View Product

    MSD Ignition – Crank Trigger Kit; Small Block Chevy (Part No.8610)

    Crank Trigger Kit; Small Block Chevy

    from

    $443.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • 7 in. Diameter
    • Absolutely the most accurate way to trigger the ignition.
    • The non-magnetic pickup cannot be false triggered.
    • Powerful magnets are embedded in a billet aluminum trigger wheel.
    See More
    View Product

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More
    View Product

    Accel – Universal Fit Graphite Suppression Spark Plug Wire Set (Part No.8021)

    Universal Fit Graphite Suppression Spark Plug Wire Set

    from

    $115.99
    These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

    Product Features:
    • 8.8mm Graphite Suppression
    • Silicone Spark Plug Boots
    • 550 Degree Double Silicone Construction
    • Fiberglass Braid
    • Carbon/Graphite Core
    • Magnetic Suppression
    • Fiberglass/Kevlar Core
    • 500 Ohms Resistance
    See More
    View Product

    MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

    Mod HEI Dust Cover, V8 & Odd Fire V6

    from

    $72.99
    Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

    Product Features:
    • Externally mounted coil
    • Increases reliability
    • Increase performance
    • High quality plastic
    • Resist spark loss
    • Use brass conductors
    • Low resistance connections
    • No modifications
    See More
    View Product

    Top Picks for 1987 Chevrolet Corvette Performance Exhaust Products

    Upgrade Chevrolet Corvettes with top-quality Performance Exhaust Products parts, including 18 OEM and aftermarket selections for your 1987 model.
    show more show less

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

    Exhaust Manifold Gasket Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    (2 reviews)
    View Product

    Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

    Performance Exhaust Gasket Set for Enhanced Sealing and Durability

    from

    $20.99
    Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

    Product Features:
    • Manufactured from high-temperature acrylic blend exhaust material
    • Provides excellent sealing and durability
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Resists Deteriorating
    • Provides Excellent Torque Retention
    See More

    (14 reviews)
    View Product

    Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

    from

    $42.99
    Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

    Product Features:
    • Withstands Intense Exhaust Heat
    • Reusable header, exhaust manifold and collector flange gaskets
    • Resists Deteriorating
    • Manufactured from “dead soft” aluminum layers – .125″ thick
    • Easy Removal For Disassembly
    • Conforms easily to surface irregularities (warped flanges)
    • Compresses down to 0.060″ to create a tight leak-proof seal
    • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
    • For high performance street, drag race and oval track use
    See More
    View Product

    Hooker Headers – Super Competition Header Gasket (Part No.10808HKR)

    Super Competition Header Gasket

    from

    $23.29
    Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

    Product Features:
    • Tear Resistant
    • Precisely Cut To Match Header
    See More
    View Product

    Mr. Gasket – Header Bolt Set (Part No.2210G)

    Header Bolt Set

    from

    $41.99
    Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

    Product Features:
    • Bright Ball Burnish Finish
    • Made From 304 Stainless
    • Compact Hex Head Is Ideal Where Space Is Limited
    • 12 Per Set
    • Resist corrosion and provides a clean professional appearance
    See More
    View Product

    Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7153)

    Copper Seal: Exhaust Gasket Set

    from

    $59.99
    Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

    Product Features:
    • Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material.
    • Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material.
    • .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
    • Total gasket thickness .094″.
    • Provides excellent sealing and durability
    • Conforms to and seals minor surface irregularities
    • For high performance street, drag race, oval track and turbocharged (extreme heat) applications.
    See More
    View Product

    Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7152G)

    Copper Seal: Exhaust Gasket Set

    from

    $60.29
    Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

    Product Features:
    • Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
    • Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
    • .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
    • Provides excellent sealing and durability
    • Conforms to and seals minor surface irregularities
    • For high performance street, drag race, oval track and turbocharged (extreme heat) applications
    See More
    View Product

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5901)

    Ultra Seal: Exhaust Gasket Set

    from

    $31.99
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Withstands Intense Exhaust Heat
    • Graphite-Impregnated Facing
    • Steel Expanded Metal Core
    • Superior Tensile Strength
    • Resists Deteriorating
    • Anti-stick Properties
    • Easy Removal For Disassembly
    See More
    View Product

    Mr. Gasket – Chrome Low Mount Alternator Bracket – Small Block Chevy – Dress Up Your Engine! (Part No.5179)

    Chrome Low Mount Alternator Bracket - Small Block Chevy - Dress Up Your Engine!

    from

    $72.39
    Mr. Gasket small block Chevy lower alternator mounting kit designed to work with a short water pump. Made of heavy gauge chrome plated steel. Complete with all necessary mounting hardware. Designed to relocate the alternator to the lower left side of the motor. This mounting bracket will make your engine compartment look neat and sanitary. Possible cross member interference on some applications.

    Product Features:
    • Alternator Relocating Kit
    • Heavy Gauge Chrome Plated Steel
    • All Necessary Hardware Included
    • Helps To Give Engine Compartment A Clean Look
    • Designed To Work With Short Style Water Pump
    • Possible Cross Member Interference On Some App
    See More
    View Product

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5904)

    Ultra Seal: Exhaust Gasket Set

    from

    $37.69
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-temperature steel core/graphite faced exhaust material
    • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
    • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
    • Conforms to and seals minor surface irregularities
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Anti-Stick Properties
    • Easy Removal For Disassembly
    See More
    View Product

    Flowtech – Header Gasket Set (Part No.99161FLT)

    Header Gasket Set

    from

    $18.29
    Header Gasket Set
    View Product

    Dynomax – Chevrolet Corvette Y-Pipe Exhaust System Kit (Part No.88033)

    Chevrolet Corvette Y-Pipe Exhaust System Kit

    from

    $140.99
    Designed to replace the stock catalytic converter pipe assembly, the DynoMax? Y-pipe kit bolts directly to the stock manifold and is fixture checked to ensure a precise fit for quick and easy installation.

    Product Features:
    • COMPATIBILITY — Designed for 1986-91 Chevrolet Corvette 5.7L V8 (excludes ZR1)
    • FLEXIBLE SOLUTION — Features O.D. sized inlets and outlets for easy fabrication of custom exhaust systems
    • IMPROVED FLOW CAPACITY — Mandrel bends improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
    • PREMIUM MATERIALS — Made from quality 16-gauge aluminized steel for durability and long life
    • PREMIUM MATERIALSÿ–ÿMade from quality 16-gauge aluminized steel for durability and long life
    • BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with DynoMax? pipe
    • BETTER TOGETHER — Use premium DynoMax? accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
    • WARNING — Intended for on-track/off-road use only; not emission legal for vehicles driven on the street; for use with long tube headers
    See More
    View Product

    Mr. Gasket – Ultra-Seal Exhaust Gaskets – Hi-Temp Graphite – Small Block Chevy Oval Port – 1.50"W X 1.82"H (Part No.5917)

    Ultra-Seal Exhaust Gaskets - Hi-Temp Graphite - Small Block Chevy Oval Port - 1.50"W X 1.82"H

    from

    $42.99
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-temperature steel core/graphite faced exhaust material
    • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
    • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
    • Conforms to and seals minor surface irregularities
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Anti-Stick Properties
    • Easy Removal For Disassembly
    See More
    View Product

    MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15658)

    Street Series Cat-Back Performance Exhaust System

    from

    $1070.00
    The MagnaFlow 1986-1991 Chevrolet Corvette Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.7L 1986-1991 Chevrolet Corvette with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Chevrolet Corvette exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Corvette’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15658 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15658 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

    Product Features:
    • Dyno-proven performance
    • Durable corrosion-resistant stainless steel construction
    • CNC precision robotic manufacturing techniques
    See More
    View Product

    Dynomax – Super Turbo Dual System (Part No.17483)

    Super Turbo Dual System

    from

    $326.99
    DynoMax Performance Exhaust is a leading performance exhaust brand built on over 25 years of market leadership. Each and every DynoMax product is backed by engineers who know what you want and expect out of a performance exhaust product… and who exceed your expectations every time.
    See More
    View Product

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7151)

    Copper Seal; Exhaust Gasket Set

    from

    $60.29
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More
    View Product

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7150)

    Copper Seal; Exhaust Gasket Set

    from

    $59.99
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More
    View Product

    Mr. Gasket – Exhaust Gaskets – Standard Duty – Small Block Chevy Square Port, 1.45"W X 1.48"H – Reusable (Part No.150C)

    Exhaust Gaskets - Standard Duty - Small Block Chevy Square Port, 1.45"W X 1.48"H - Reusable

    from

    $36.49
    Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

    Product Features:
    • Manufactured from high-temperature acrylic blend exhaust material
    • Provides excellent sealing and durability
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    See More
    View Product

    In-Demand Performance Oil Filters for 1987 Chevrolet Corvettes

    Select from 3 premium Performance Oil Filters parts for your 1987 Chevrolet Corvette, with prices ranging from $10.99 to $17.99.
    show more show less

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    (35 reviews)
    View Product

    Mr. Gasket – Enhancement Products (Part No.2060)

    Enhancement Products

    from

    $10.99
    This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.

    Product Features:
    • Internally battled
    • High-porosity filter
    • Ideal for high performance
    • Includes rubber grommet
    See More
    View Product

    Mr. Gasket – Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up (Part No.2063)

    Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up

    from

    $12.99
    This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

    Product Features:
    • Chrome plated steel
    • Fits stock factory oil filler tubes
    • Features side PCV hook up tube
    • Includes Rubber Grommet
    See More
    View Product

    Most Sold 1987 Chevrolet Corvette Performance Distributors

    Explore our best-selling Chevrolet parts for the 1987 Corvette among 12 OEM and aftermarket options starting from $10.99.
    show more show less

    PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

    D9001 Flame-Thrower HEI Distributor Advance Curve Kit

    from

    $26.99
    Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

    Product Features:
    • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
    • Precision machined chromoly weights and center plate.
    See More

    (1 reviews)
    View Product

    Accel – HEI Distributor Cap & Rotor Kit – Tan – Chevrolet V8 (Part No.8132)

    HEI Distributor Cap & Rotor Kit - Tan - Chevrolet V8

    from

    $47.49
    Chevrolet V8 engines with HEI/EST remount mount coil 8132 35362 applications include 1987-93 Cars and 1987-95 Trucks (Supersedes 60110).

    Product Features:
    • Features Protection From Arc Thru And Crossfire
    • Features 60K V Rated Alkyd Compound
    See More

    (81 reviews)
    View Product

    PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

    D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor

    from

    $30.99
    Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

    Product Features:
    • PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
    • Premium quality wire harness and capacitor.
    See More

    (1 reviews)
    View Product

    MSD Ignition – Cap and Rotor Kit; HEI; Extreme; includes PN 84111; 84101; 84022 (Part No.84023)

    Cap and Rotor Kit; HEI; Extreme; includes PN 84111; 84101; 84022

    from

    $116.99
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Includes PN[84111/84101/84022]
    See More

    (1 reviews)
    View Product

    PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

    D700700 Advance Spring Kit Flame-Thrower Billet Distributor

    from

    $20.99
    Performance mechanical advance springs.

    Product Features:
    • PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
    • Performance mechanical advance springs.
    See More
    View Product

    PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)

    D660701 Rotor Flame-Thrower Billet Distributor

    from

    $18.99
    Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

    Product Features:
    • PerTronix D660701 Rotor Flame-Thrower Billet Distributor
    • Rotor for Flame-Thrower cast distributors
    See More
    View Product

    MSD Ignition – Rotor; Extreme Output; GM HEI (Part No.84101)

    Rotor; Extreme Output; GM HEI

    from

    $30.19
    With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365, plus will work on stock applications.

    Product Features:
    • Extreme output rotor
    See More
    View Product

    PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

    D4061 Flame-Thrower HEI Distributor Rotor Red

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More
    View Product

    MSD Ignition – Distributor; Billet GM HEI (Part No.8365)

    Distributor; Billet GM HEI

    from

    $594.99
    The Chevrolet HEI distributor is a favorite for muscle cars, street rods and even circle track racers. The integrated coil keeps under mount wiring clean, and for race cars, the idea of running one wire to the distributor keeps things simple. However, when it comes to performance, the stock HEI falls short. MSD answers the need for a strong, accurate and high performance HEI with our Pro-Billet HEI. The distributor is supplied with our digital HEI module and coil so there is plenty of spark energy combined with improved dwell and timing control. Tig welded on top of the distributor shaft is MSD’s adjustable centrifugal advance assembly. Three sets of springs and four stop bushings let you dial in up to 24 different timing curves to match your driving needs. Plus, there’s a vacuum advance for those concerned with economy. All of this is assembled around a precision and great looking CNC machined housing.

    Product Features:
    • Complete performance HEI distributor upgrade for Chevy V8 engines
    • Supplied w/Brass Terminal Distributor Cap And Rotor
    • Full Spark Energy Output To 9000 Rpm
    • An 8.5 amp; single spark; inductive discharge ignition module
    • Includes MSD PN[83647] and MSD HEI Coil PN[8225]
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    See More
    View Product

    MSD Ignition – Rotor; GM HEI Late Model; External Coil Cap (Part No.8427)

    Rotor; GM HEI Late Model; External Coil Cap

    from

    $19.49
    Rotor assembly for a GM HEI late model with external coil cap Chevy V8 cap-a-dapt. The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Resist Carbon Tracking
    • Max Voltage Transfer
    • Molded From Insulated Material
    See More
    View Product

    PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

    D4062 Flame-Thrower HEI Distributor Rotor Blue

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More
    View Product

    PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

    D4260 Flame-Thrower Distributor Rotor HEI/EST Black

    from

    $10.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More
    View Product

    Top-Rated Performance and Racing Products Brands For Your 1987 Chevrolet Corvette

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1987 Chevrolet Corvettes. Below you’ll find some of our best rated Performance and Racing Products from B & M, FEL-PRO Performance, and Accel, and more. Performance and Racing Products from these brands that fit a 1987 Corvette start at just $31.49 and are rated as high as 4.1 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular B & M 1987 Chevrolet Corvette Performance and Racing Products

    When it comes to maintaining or upgrading your 1987 Chevrolet Corvette, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. B & M ticks all of those boxes. We offer a wide selection of B & M Performance and Racing Products, specifically designed for the 1987 Chevrolet Corvette. With over 3 B & M brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $269.99, with an average price of just $293.32. Plus, with over 15 customer reviews and an average rating of 4.1 stars, you can trust that our B & M Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
    Automatic Shifter, Unimatic Shifter
    from $269.99
    (3)
    Automatic Shifter, Unimatic Shifter
    “Super easy to install, works nice.”
    Automatic Shifter, Sport Shifter
    from $329.99
    (1)
    Automatic Shifter, Sport Shifter
    “This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”
    Automatic Shifter, Z-Gate
    from $279.99
    (11)
    Automatic Shifter, Z-Gate
    “Great shifter”

    Popular FEL-PRO Performance 1987 Chevrolet Corvette Performance and Racing Products

    FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1987 Chevrolet Corvette owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1987 Corvette, Advance Auto Parts carries a full inventory of 3 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $31.49 to $52.99, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
    Exhaust Manifold Gasket Set
    from $31.49
    (2)
    Exhaust Manifold Gasket Set
    “Appear to be A-OK on my Chevrolet as far as fitment”
    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
    from $39.49
    (1)
    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
    “Real good products”
    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
    from $52.99
    (1)
    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
    “Racing application”

    FAQs for 1987 Chevrolet Corvette Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1987 Chevrolet Corvettes?

    Out of 168 Performance and Racing Products that fit 1987 Chevrolet Corvettes, the following parts are the top sellers:

    What’s the price range for 1987 Chevrolet Corvette Performance and Racing Products?

    Performance and Racing Product prices for the 1987 Chevrolet Corvette start at $5.99 and go up to $1,070.00 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1987 Chevrolet Corvette?

    The average price for Performance and Racing Products for the 1987 Chevrolet Corvette is $168.70. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Corvette model years?

    Yes, we currently carry Performance and Racing Products for 63 model years of Chevrolet Corvettes between 1953 and 2019. Performance and Racing Products are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

    What are the cheapest Performance and Racing Products for my 1987 Chevrolet Corvette?

    The cheapest 1987 Chevrolet Corvette Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1987 Chevrolet Corvette?

    Out of 222 reviews by customers, our 1987 Chevrolet Corvette Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1987 Chevrolet Corvette and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1987 Chevrolet Corvette?

    Can I get help with 1987 Chevrolet Corvette Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

    What is your return policy for Chevrolet Corvette Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

    More Popular Parts for All Makes