1987 Chevrolet Corvette Flywheels

Essential 1987 Chevrolet Corvette Flywheels

ATP – Flywheel Ring Gear (Part No.ZA-500)

Flywheel Ring Gear

from

$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ATP – Flywheel Ring Gear (Part No.ZA-512)

Flywheel Ring Gear

from

$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ATP – FLYWHEEL SHIM (Part No.GS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP Flywheel Shim

from

$27.99
ATP Flywheel Shim

ATP – FLYWHEEL SHIM (Part No.GS-10)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

Lakewood – Power Train (Part No.RM-902)

Power Train

from

$193.99
Power Train

LUK – Flywheel (Part No.I1000835754LUK)

Flywheel

from

$227.98
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:
  • OE quality and direct fit application
  • Made from high quality steel
  • Designed to reduce clutch chatter and vibration
  • Dynamically balanced
See More

ATP – Manual Transmission Flywheel (Part No.Z-296)

Manual Transmission Flywheel

from

$219.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • No resurfacing required
  • Improves performance
See More

LuK – OE Quality Flywheel (Part No.LFW130)

OE Quality Flywheel

from

$119.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

B & M – Flexplate, 29.1 Approved, Fits LSX Type Motors (Part No.20340)

Flexplate, 29.1 Approved, Fits LSX Type Motors

from

$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for GM 1998-up 4.8L, 5.3L, 5.7L & 6.0L LS engines with 6-bolt crankshaft flange, including 2010-15 Camaro with L99 engine. Features include high tensile strength steel construction to resist elongation and cracking, 10.75 and 11.06 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is finished with a Zinc plating and Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Note: Will not fit 1999-00 6.0L applications with 0.400 inch extended crank flange/flat flexplate or 1999-00 4.8L engines that originally came with a manual transmission. A flexplate spacer is required for retrofitting Non LS era transmissions to LS engines.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-113)

Automatic Transmission Flex Plate

from

$56.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)

Flexplate: Chevy 57-85 (153T)

from

$145.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Product Features:
  • Thicker Than Stock Steel Plate
  • Ring Gear Securely Welded
  • Dual Bolt Patterns
  • Zinc-Dichromate Plated To Resist Corrosion
  • Withstands High Torque and RPM
See More

Lakewood – OEM Replacement Flexplate (Part No.RM-903)

OEM Replacement Flexplate

from

$59.99
OEM Replacement Flexplate

Lakewood – Power Train (Part No.RM-925)

Power Train

from

$172.99
Power Train

LuK – OE Quality Flywheel (Part No.LFW131)

OE Quality Flywheel

from

$107.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-128)

Automatic Transmission Flex Plate

from

$54.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)

Flywheel Bolts - Thread Size 7/16-20; Thread Length 0.900 In. (sold by each)

from

$3.99
This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
  • Thread Size: 7/16-20
  • Tread Length: 0.900 in.
  • SAE
  • PLEASE NOTE: Item priced and sold by each. See store for details.
See More

Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)

Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In

from

$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.100-2801)

ARP Flywheel Bolt Kit

from

$12.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.

Product Features:
  • 7/16″-20 Thread Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Ford 289-460
  • Chevy 90 Degree V6 & 265-454 With 2PC Rear Seal
  • Set of 6
  • 1″ Underhead Length
See More

Dorman – Help – Flywheel Bolts (Part No.14557)

Flywheel Bolts

from

$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)

M/T FLYWHEEL BOLT

from

$18.99
M/T FLYWHEEL BOLT

1987 Chevrolet Corvette Flywheels

Maybe you’re in the middle of a full rebuild of that 1987 Chevrolet Corvette. Maybe you just need a couple of Flywheels. Either way, Advance Auto Parts has 18 different Flywheels in our inventory ranging from $3.99 to $499.99. That means you can find the exact parts or products you need to keep that 1987 Chevrolet Corvette running smoothly.

Flywheels are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Chevrolet Corvette. Dorman, ATP, and ARP Auto Racing are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Flywheels for your 1987 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 9 reviews in this category, some of the top rated parts include Flexplate, 168 Tooth 86-94 Chevrolet Small Block with 4.0 stars.

So if you’re in the market for aftermarket Flywheels to keep your 1987 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Flywheels Brands To Make Your 1987 Chevrolet Corvette Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Flywheels make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Flywheels brands and parts.

Popular ATP Flywheels

We carry ATP parts in our stock across Flywheels and Flexplates categories, plus more. For a 1987 Chevrolet Corvette, our most popular ATP Flywheels include:
ATP Automatic Transmission Flex Plate
from $66.99
(2)
ATP Automatic Transmission Flex Plate
Flywheels and Flexplates

FAQs for 1987 Chevrolet Corvette Flywheels

What are the most purchased Flywheels for the 1987 Chevrolet Corvette?

Out of 18 Flywheels for the 1987 Chevrolet Corvette, the most popular in our inventory are:
M/T FLYWHEEL BOLT
from $18.99
This product is not rated
M/T FLYWHEEL BOLT
Flywheel Bolts
ARP Flywheel Bolt Kit
from $12.99
This product is not rated
ARP Flywheel Bolt Kit
Flywheel Bolts
FLYWHEEL SHIM
from $26.99
This product is not rated
FLYWHEEL SHIM
Flywheel Shims

What are the top-rated 1987 Chevrolet Corvette Flywheels?

Top-rated Flywheels for your 1987 Chevrolet Corvette based on customer reviews/ratings are:
Flexplate, 168 Tooth 86-94 Chevrolet Small Block
from $181.99
(1)
Flexplate, 168 Tooth 86-94 Chevrolet Small Block
“Went on perfectly…very easy install”