1987 Chevrolet Caprice Differentials

Essential 1987 Chevrolet Caprice Differentials

Yukon Gear – Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette (Part No.33345)

Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette

from

$53.99
Positraction cross pin bolt for for 8.2″ GM CI ‘Vette.

Product Features:
  • Cross pin bolt for GM 8.2″ and 1963-1979 Corvette
  • For OEM positraction applications only
See More

Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

from

$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

Product Features:
  • Pinion gear thrust washer for GM 8.5″ and 8.6″
  • Fits standard open differentials only
  • 0.795″ I.D.
See More

Yukon Gear – Minor Install Kit For GM 8.5" Rear Differential (Part No.12055)

Minor Install Kit For GM 8.5" Rear Differential

from

$48.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)

Product Features:
  • Fits GM 8.5″ rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

Clutch Guide For GM 7.5" & 7.6" Dura Grip

from

$10.99
Product Features:
  • Clutch guide
  • Fits GM 7.5″ and 7.625″ Dura Grip
See More

Richmond Gear – MiniSpool (Part No.78-7528-1)

MiniSpool

from

$151.99
MiniSpool

Motive Gear – OEC GM 7.6" 28 SPL 3.23-UP (Part No.GM7.6E)

OEC GM 7.6" 28 SPL 3.23-UP

from

$138.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

National – Bearings (Part No.HM89210)

Bearings

from

$14.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25"

from

$57.99
Product Features:
  • Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
See More

National – Bearings (Part No.HM803149)

Bearings

from

$36.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPGM75)

Differential Cross Shaft

from

$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – 1541H Alloy Rear Axle For ’80-’88 8.5" GM Caprice And Impala (Part No.21426)

1541H Alloy Rear Axle For '80-'88 8.5" GM Caprice And Impala

from

$213.99
Yukon 1541H alloy rear axle for ’80-’88 8.5″ GM Caprice and Impala with a length of 30-7/16″ inches and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • 28 spline
  • 30 7/16″ long
  • Fits GM 8.5″ in 1980-1988 Caprice and Impala
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1019-B)

RngPnnInstlKt

from

$39.49
RngPnnInstlKt

Richmond Gear – RngPnn (Part No.79-0029-1)

RngPnn

from

$513.99
RngPnn

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

from

$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
See More

Yukon Gear – Standard Open Spider Gear Kit For 8.5" GM With 30 Spline Axles (Part No.16055)

Standard Open Spider Gear Kit For 8.5" GM With 30 Spline Axles

from

$207.99
Yukon standard open spider gear kit for 8.5″ GM with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 8.5″ open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Chrome Cover For 8.6", 8.5" And 8.2" GM Rear (Part No.32017)

Chrome Cover For 8.6", 8.5" And 8.2" GM Rear

from

$74.99
Chrome cover for 8.6″, 8.5″ and 8.2″ GM rear.

Product Features:
  • Fits GM 8.2″, 8.5″ and 8.6″
  • Chrome
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI-30)

Differential Carrier Gear Kit

from

$153.99


Product Features:
  • GM10 BOLT 8.5″ 30 SPL INTERNAL KIT 1988-1999 (OPEN)
See More

Pro-King – Pinion Nut (Part No.740A961)

Pinion Nut

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

Cast Yoke For GM 8.5" With A 1350 U/Joint Size

from

$234.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

Yukon Gear – Pinion Nut Washer (Part No.33166)

Pinion Nut Washer

from

$23.99
Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

Product Features:
  • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
See More

Yukon Gear – Side Gear Thrust Washer For GM 8.2" & 55P (Part No.33529)

Side Gear Thrust Washer For GM 8.2" & 55P

from

$10.99
Product Features:
  • Side gear thrust washer for GM 8.2″ and 1955-1964 GM passenger car
  • Fits standard open differentials only
See More

Yukon Gear – Ring Gear Bolt (Part No.33049)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:
  • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
  • 7/16″ x 20
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55072)

DIFFERENTIAL GASKET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

1987 Chevrolet Caprice Differentials

Maybe you’re in the middle of a full rebuild of that 1987 Chevrolet Caprice. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 288 different Differentials in our inventory ranging from $1.99 to $1,704.99. That means you can find the exact parts or products you need to keep that 1987 Chevrolet Caprice running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Chevrolet Caprice. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1987 Chevrolet Caprice, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,294 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.5 stars and Rear Differential Cover with 4.1 stars.

So if you’re in the market for aftermarket Differentials to keep your 1987 Chevrolet Caprice rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1987 Chevrolet Caprice Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Chevrolet Caprice demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Caprice the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1987 Chevrolet Caprice, our most popular Driveworks Differentials include:
Oil Seal
from $7.79
(1)
Oil Seal
Differential Pinion Seals

Top 1987 Chevrolet Caprice Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1987 Chevrolet Caprice. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets
DIFFERENTIAL GASKET
from $7.99
(45)
DIFFERENTIAL GASKET
Rear Differential Cover Gaskets

FAQs for 1987 Chevrolet Caprice Differentials

What are the most purchased Differentials for the 1987 Chevrolet Caprice?

Out of 288 Differentials for the 1987 Chevrolet Caprice, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 1987 Chevrolet Caprice Differentials?

Top-rated Differentials for your 1987 Chevrolet Caprice based on customer reviews/ratings are:
Rear Differential Cover
from $20.99
(38)
Rear Differential Cover
“Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”
Rear Differential Cover
from $32.99
(14)
Rear Differential Cover
“Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”