1987 BMW M6 Brake Parts

Essential Brake Parts for 1987 BMW M6s

ATE – Anti Rattle Spring / Clip (Part No.N106978356ATE)

Anti Rattle Spring / Clip

from

$10.68
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

ATE – ATE Brake Master Cylinder (Part No.N300019759ATE)

ATE Brake Master Cylinder

from

$481.87
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

ATE – Brake Reservoir Cap (Part No.N303078386ATE)

Brake Reservoir Cap

from

$38.82
Brake Reservoir Cap

ATE – Caliper Guide Pin (Part No.N1045312870ATE)

Caliper Guide Pin

from

$25.04
The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Disc Brake Pad Wear Sensor (Part No.WSA3235)

Disc Brake Pad Wear Sensor

from

$38.49
The braking system of some vehicle applications provide an indication when the brake pad condition is low and in need of service. This sensor provides an input when the pad thickness becomes low.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Zimmermann – Formula-Z High Carbon Coat-Z Brake Disc (Rotor) (Part No.N1000266917ZFZ)

Formula-Z High Carbon Coat-Z Brake Disc (Rotor)

from

$440.15
The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load. The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimized chassis structures. COAT-Z – Coat-Z is a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Formula Z – Bake Disc – The composite or compound brake disc named Formula Z is suitable for motorsport applications due to its special design. In contrast to the fully cast-iron brake disc, the friction ring (cast iron) and hub (aluminum alloy) are connected by steel pins. The resulting, floating construction reduces the thermal buffering of the friction ring in the operating temperature state substantially, because the friction ring can freely expand under thermal stress (e.g. when braking from high speeds or several consecutive brake applications). The use of aluminium alloy also considerably reduces the unsprung masses on the vehicle. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000266889ZIC)

Coat-Z Brake Disc (Rotor)

from

$61.71
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

ATE – Premium ATE Brake Accumulator for Optimal Braking Performance and Safety (Part No.N305053018ATE)

Premium ATE Brake Accumulator for Optimal Braking Performance and Safety

from

$299.45
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13471)

Disc Brake Hardware Kit

from

$23.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13572)

Disc Brake Hardware Kit

from

$27.49
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD279)

Brake Pads: Reliable and Dependable Stopping

from

$22.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Singler layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust (Part No.PMD1469H)

Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust

from

$66.99
Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:
  • Industry-leading number of application specific formulations for maximum performance and extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • Burnishing compound allows for a faster break-in of pads and rotors
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Wear sensors included on most European applications that require replacement
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38552)

Brake Hose Assembly: Copper Washers Included

from

$17.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

World Brake Resources – WBR Brake Hose (Part No.N7000194035WBR)

WBR Brake Hose

from

$47.62
All WBR hydraulic hoses are manufactured to match the exact OE fit, OE construction, to ensure quick and easy installation, as well as trouble-free functionality for the life of the hose. WBR brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
  • Very high ozone resistance, temperature change resistance and so a long service life
  • Low water permeation and so extended service life of the brake fluid
  • Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.
See More

ATE – Brake Pressure Switch (Part No.N302019786ATE)

Brake Pressure Switch

from

$105.97
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers. Mounted on top of brake pressure regulator. Coarse thread pitch.
See More

ATE – Brake Pressure Switch (Part No.N302034644ATE)

Brake Pressure Switch

from

$54.71
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers. Mounted on side of brake pressure regulator. Fine thread pitch.
See More

FTE – Brake Caliper Repair Kit (Part No.N105078340FTE)

Brake Caliper Repair Kit

from

$30.53
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15442)

Disc Brake Caliper Repair Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Carquest Wearever – Parking Brake Shoes (Part No.S817)

Parking Brake Shoes

from

$28.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Parking Brake Shoes (Part No.S890)

Parking Brake Shoes

from

$34.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Premium Gold – Brake Pads: With Hardware, Ceramic, Long Life and Quiet (Part No.GNAD919)

Brake Pads: With Hardware, Ceramic, Long Life and Quiet

from

$62.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-1648)

Z16 Low-Dust Ceramic Brake Pads

from

$65.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

Caliper Pin Boot Kit

from

$20.00
ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:
  • Reduced cost
  • OE Quality
  • Complete Kit
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2953)

Vacuum Brake Booster: Without Master Cylinder

from

$319.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

ATE – Hydraulic Brake Booster (Part No.N400019789ATE)

Hydraulic Brake Booster

from

$1220.98
ATE is one of the world’s leading OE suppliers of brake control and brake assist systems. Hydraulic brake boosters make efficient use of the existing energy supply system in a vehicle. The hydraulic pump is used to supply, for example, power steering with the necessary high-pressure oil. It is only about the same size and weight as the tandem master cylinder. It has a substantially higher runout pressure than vacuum boosters, and is not dependent on a vacuum supply. It can therefore also be used without problem on diesel engine vehicles or on vehicles whose engines produce low vacuum levels. If the steering pump fails, the hydraulic pressure reservoir contains an adequate pressure reserve to apply the brakes several times with full boost effect. Even after this pressure reserve has been used up, it is always still possible to brake – although without reinforcement, and therefore with a significantly greater force from the foot.

Product Features:
  • Original equipment (OE) quality
  • Wide range of single and tandem Brake Boosters
  • Unique tie-rod design meaning lighter and thinner parts for more efficient performance
See More

TRW – TRW Brake Booster (Part No.N4000313053TRW)

TRW Brake Booster

from

$328.38
Brake Boosters are a vital part of our TRW Drum Brake and Actuation product range, helping you deliver outstanding quality for your customers. We test our Brake Boosters to every extreme, which means you can deliver a more reliable and consistent performance on the road for the drivers you serve. All motorists now demand durability and resilience from their vehicles, which is why we invest in developing Drum Brake and Actuation products like Brake Boosters that are designed to last for longer. Choosing TRW Brake Boosters is a sure way of improving reliability and safety for your customer. As an OE manufacturer of Brake Boosters we can supply you with exactly the same product quality that we deliver to vehicle manufacturers. Whether you’re dealing with a single or tandem Brake Booster, the instructions we provide are easy to follow, which means fitting is straightforward and simple. You can also be safe in the knowledge that TRW Brake Boosters are as environmentally friendly as possible, because we always use as little heavy metal as possible and recyclable materials whenever we can.

Product Features:
  • Original equipment (OE) quality
  • Wide range of single and tandem Brake Boosters
  • Unique tie-rod design meaning lighter and thinner parts for more efficient performance
  • Great coverage, with almost 340 part numbers in the range, so you can serve more customers
See More

Upgrade your 1987 BMW M6 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1987 BMW M6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Brake Parts are key to keeping your M6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 34 Brake Parts for the 1987 BMW M6, designed to meet your needs without breaking the bank. From Brake Kit replacements to Brake Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1987 BMW M6 at great prices. Our Brake Parts inventory for this model ranges from just $6.53 to $1,220.98, with an average price of $90.58. Our 34 Brake Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1987 BMW M6 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 BMW M6, we stock popular OEM and aftermarket Brake Parts from top names like Carquest, and more. Carquest Brake Parts start at just $16.79 and boast an impressive 4 stars average rating from customers. With 3 customer reviews and counting, our 1987 BMW M6 Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 BMW M6 is always ready to roll. We’re committed to providing you with everything you need to keep your M6 in top shape, all in one place. Start shopping confidently below for your 1987 BMW M6!

Best-Selling Brake Kits for 1987 BMW M6s

Enhance the driving experience in your BMW with 3 quality Brake Kit components, starting at $13.69.

ATE – Parking Brake Hardware Kit (Part No.N5005193949ATE)

Parking Brake Hardware Kit

from

$25.63
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.
See More

FTE – Brake Caliper Repair Kit (Part No.N105078340FTE)

Brake Caliper Repair Kit

from

$30.53
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8200)

Disc Brake Hardware Pin Boot Kit

from

$13.69
This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.
See More

Most Popular 1987 BMW M6 Brake Hoses

Customize your BMW with 2 Brake Hoses products like Brake Hoses, all priced under $26.99.

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA116467)

Brake Hose Assembly: Copper Washers Included

from

$26.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Top Picks for 1987 BMW M6 Brake Calipers

Upgrade BMW M6s with top-quality Brake Calipers parts, including 3 OEM and aftermarket selections for your 1987 model.

Autopart International Inc – Caliper Guide Pin (Part No.N10451913325API)

Caliper Guide Pin

from

$10.95
Caliper Guide Pin

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

Caliper Pin Boot Kit

from

$20.00
ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:
  • Reduced cost
  • OE Quality
  • Complete Kit
See More

ATE – ATE Caliper Guide Pin (Part No.N1045310493ATE)

ATE Caliper Guide Pin

from

$10.68
The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

In-Demand Brake Pads and Shoes for 1987 BMW M6s

Select from 15 premium Brake Pads and Shoes parts for your 1987 BMW M6, with prices ranging from $6.53 to $60.24.

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD279)

Brake Pads: Reliable and Dependable Stopping

from

$22.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Singler layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1341)

Brake Pad Wear Sensor

from

$16.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

World Brake Resources – Ceramic Brake Pads (Part No.N1010415256WBR)

Ceramic Brake Pads

from

$46.22
Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:
  • Original Equipment Performance
  • Solid Pedal Feel With Smooth Braking Performance
  • Ultra-Quiet Ceramic Formulation
  • Low Dust – Long Life
  • Advanced Material Platform Specific Shims
  • Scorched for Easy Break In
  • Positive Mold Construction
  • All WBR Pads are 100% Shimmed
See More

Bosch – QuietCast Premium Brake Pads w/ Shims (Part No.N1010441081BOS)

QuietCast Premium Brake Pads w/ Shims

from

$60.24
Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • OE style rubber-core shims
  • Advanced, platform-specific Semi Metallic formulation
  • Dedicated engineers source and rigorously test all friction materials and formulations
  • Manufactured under the same exacting quality standards as OE components and system
  • Powder-coated backing plate
  • Rigorous physical and dynamometer testing
  • Synthetic lubricant in box
  • Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
  • At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
  • Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
  • Provides maximum stability resulting in quieter shim performance over the life of the pad
See More

TRW – Premium OE Formulated Brake Pads (Part No.N101026076TRW)

Premium OE Formulated Brake Pads

from

$52.92
The TRW Premium brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • Include the OE specified shims.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic blended compound.
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-279)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$37.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-279)

Z16 Low-Dust Ceramic Brake Pads

from

$31.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD163A)

Brake Pads: Reliable and Dependable Stopping

from

$27.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Singler layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium – Disc Brake Pad Wear Sensor (Part No.WSA3913)

Disc Brake Pad Wear Sensor

from

$26.99
Disc Brake Pad Wear Sensor

Pex – Brake Pad Wear Sensor (Part No.N103066845PEX)

Brake Pad Wear Sensor

from

$21.57
PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Resistant to Extreme High Heat
  • Highly Durable
  • Supplied with all required hardware
  • PEX is an OE supplier to Brake and Vehicle Manufacturers
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1087)

Brake Pad Wear Sensor

from

$16.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

TRW – Brake Pad Wear Sensor (Part No.N1030922538TRW)

Brake Pad Wear Sensor

from

$10.56
TRW electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Highly Durable and Resistant to Temperatures
  • Supplied with OE style electrical connectors
  • TRW is an OE supplier to Brake and Vehicle Manufacturers
See More

Bowa – Brake Pad Wear Sensor (Part No.N103066845BOW)

Brake Pad Wear Sensor

from

$7.64
Bowa electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at Bowa make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Highly Durable and Resistant to Temperatures
  • Supplied with OE style electrical connectors
  • Bowa is an OE supplier to Brake and Vehicle Manufacturers
See More

Bowa – Brake Pad Wear Sensor (Part No.N1030267612BOW)

Brake Pad Wear Sensor

from

$7.51
Bowa electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at Bowa make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Highly Durable and Resistant to Temperatures
  • Supplied with OE style electrical connectors
  • Bowa is an OE supplier to Brake and Vehicle Manufacturers
See More

Pex – Brake Pad Wear Sensor (Part No.N1030267612PEX)

Brake Pad Wear Sensor

from

$6.53
PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Resistant to Extreme High Heat
  • Highly Durable
  • Supplied with all required hardware
  • PEX is an OE supplier to Brake and Vehicle Manufacturers
See More

Most Sold 1987 BMW M6 Brake Rotors and Drums

Explore our best-selling BMW parts for the 1987 M6 among 2 OEM and aftermarket options starting from $61.71.

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000266889ZIC)

Coat-Z Brake Disc (Rotor)

from

$61.71
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Brembo – High Carbon Brake Disc (Rotor) (Part No.N1000266889BRE)

High Carbon Brake Disc (Rotor)

from

$72.25
The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Made of special cast iron with high carbon content
  • Pillar Venting Technology (Vented Rotors Only)
  • Easy Check wear indicator system
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
See More

Top-Rated Brake Parts Brands For Your 1987 BMW M6

Shop for the best-rated brands offering Brake Parts and other products for your 1987 BMW M6s. Below you’ll find some of our best rated Brake Parts from Carquest, and more. Brake Parts from these brands that fit a 1987 M6 start at just $16.79 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1987 BMW M6 Brake Parts

When it comes to maintaining or upgrading your 1987 BMW M6, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1987 BMW M6. With over 8 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $16.79, with an average price of just $38.94. Plus, with over 3 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Brake Hose Assembly: Copper Washers Included
from
$26.99
This product is not rated

Brake Hose Assembly: Copper Washers Included

“”

Brake Pad Wear Sensor
from
$16.79
This product is not rated

Brake Pad Wear Sensor

“”

New Brake Master Cylinder: Without Reservoir, Exact Fit, 7/8" Bore
from
$149.99
This product is not rated

New Brake Master Cylinder: Without Reservoir, Exact Fit, 7/8" Bore

“”

FAQs for 1987 BMW M6 Brake Parts

Which Brake Parts are best-sellers for 1987 BMW M6s?

Out of 34 Brake Parts that fit 1987 BMW M6s, the following parts are the top sellers:

What’s the price range for 1987 BMW M6 Brake Parts?

Brake Part prices for the 1987 BMW M6 start at $6.53 and go up to $1,220.98 for the most premium parts.

What’s the average price of a Brake Part for a 1987 BMW M6?

The average price for Brake Parts for the 1987 BMW M6 is $90.58. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other BMW M6 model years?

Yes, we currently carry Brake Parts for 13 model years of BMW M6s between 1988 and 2018. Brake Parts are bought most frequently for the following model years: 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2010, and 2009.

What are the cheapest Brake Parts for my 1987 BMW M6?

The cheapest 1987 BMW M6 Brake Parts we carry in stock are:

What are the top-rated Brake Parts that fit the 1987 BMW M6?

Out of 3 reviews by customers, our 1987 BMW M6 Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1987 BMW M6 and their top-rated products:

Can I get help with 1987 BMW M6 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Brake Parts and more.

What is your return policy for BMW M6 Brake Parts?

Advance Auto Parts keeps returns simple. For new BMW M6 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.