1987 BMW L7 Brake Parts

Essential 1987 BMW L7 Brake Parts

ATE – Anti Rattle Spring / Clip (Part No.N106978356ATE)

Anti Rattle Spring / Clip

from

$9.53
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Parking Brake Shoes (Part No.S817)

Parking Brake Shoes

from

$28.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-394)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$43.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-394)

Z16 Low-Dust Ceramic Brake Pads

from

$37.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

ATE – Brake Pressure Switch (Part No.N302019786ATE)

Brake Pressure Switch

from

$105.97
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers. Mounted on top of brake pressure regulator. Coarse thread pitch.
See More

ATE – Brake Pressure Switch (Part No.N302034644ATE)

Brake Pressure Switch

from

$54.71
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers. Mounted on side of brake pressure regulator. Fine thread pitch.
See More

Pilenga – Coated High Carbon Brake Disc (Rotor) (Part No.N1000266905PIC)

Coated High Carbon Brake Disc (Rotor)

from

$43.90
Pilenga Brake Discs, 100% Made in Italy The Pilenga coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. Pilenga manufactures OE-Quality Brake Discs that assures maximum performance and enhanced driving comfort, providing the same levels of quality, technology and performance that are found in many of the OEM fitments. With enhanced thermal inertia, Pilenga High Carbon discs reduce both vibration and noise. Pilenga’s meticulously controlled production process makes it possible to precisely contrast the chemical composition of the cast iron, maximizing the percentage of carbon in the discs.

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Excellent braking performance.
  • Attractive appearance (strong visual impact combined with alloy wheels)
  • Eco-Friendly long lasting corrosion resistance
  • High carbon content
  • No reduction in friction coefficient with Pilenga coated brake discs
See More

FAE – FAE Stop Light Switch (Part No.P305521113FAE)

FAE Stop Light Switch

from

$19.93
The FAE Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATE – Premium ATE Brake Accumulator for Optimal Braking Performance and Safety (Part No.N305053018ATE)

Premium ATE Brake Accumulator for Optimal Braking Performance and Safety

from

$299.45
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.
See More

FTE – Brake Caliper Repair Kit (Part No.N105084004FTE)

Brake Caliper Repair Kit

from

$13.16
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

FTE – Brake Caliper Repair Kit (Part No.N105078340FTE)

Brake Caliper Repair Kit

from

$30.53
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

Caliper Pin Boot Kit

from

$20.00
ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:
  • Reduced cost
  • OE Quality
  • Complete Kit
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

ATE – Original Brake Hose (Part No.N700030384ATE)

Original Brake Hose

from

$20.73
Highest mechanical stability under load, highest compressive strength and resistance ATE/Continental has been contributing hydraulic brake hose assemblies for the automotive industry since the 1920’s. With an annual production of approximately 40 million brake hose assemblies, ATE/Continental is one of the world leaders in this sector today. As a full brake system supplier, ATE/Continental distinctively places its direct knowledge of overall hydraulic brake design into this product. The complete OEM experience, coupled with the specialized technology of an OE world market leader, uniquely places ATE/Continental near the top for brake hose assemblies with their ATE brand. ATE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • More than 70 braiding machines for braid production.
  • Autoclaves or vulcanizing presses, and automatic surface control for the production of the inner and outer rubber layers.
  • Primary use of extruded connectors.
  • Test stands and laboratories are abundantly available for assured accuracy in satisfying the rigid criteria of all customer specifications.
  • Outstanding quality standards with compliance certifications for FMVSS106 on our ATE brake hose assemblies, as well as ISO 14001 certification for production.
  • In-house ATE N standards that exceed the legal requirements. Original ATE Brake hoses – Presentation
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA116467)

Brake Hose Assembly: Copper Washers Included

from

$25.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1176)

Semi Loaded Disc Brake Caliper with Bracket

from

$62.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1087)

Brake Pad Wear Sensor

from

$16.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-396)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$43.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-396)

Z16 Low-Dust Ceramic Brake Pads

from

$37.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-279)

Z16 Low-Dust Ceramic Brake Pads

from

$31.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD279)

Brake Pads: Reliable and Dependable Stopping

from

$22.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-279)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$37.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

ATE – Parking Brake Hardware Kit (Part No.N5005193949ATE)

Parking Brake Hardware Kit

from

$24.85
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.
See More

1987 BMW L7 Brake Parts

You count on your 1987 BMW L7 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 24 Brake Parts ranging in price from $9.53 to $299.45, you’re sure to find everything you need for your 1987 BMW L7.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 9 different brands like Cardone, Carquest, and ATE. 1987 BMW L7 Brake Parts start as low as $9.53!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 13 extensive product reviews on 1987 BMW L7 Brake Parts.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1987 BMW L7 below to get started!

Top-Rated Brake Parts Brands For Your 1987 BMW L7

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 BMW L7 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, ATE, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1987 BMW L7 back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders