1986 Porsche 911 Engine Internals

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

• Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
• Various designs specifically adapted to the area of application ensure excellent functionality and performance
• High-performance FPM guarantees optimum leak tightness

Crankshaft Seal

Product Features:

• Brand may vary by location

Crankshaft Seal

Connecting Rod Bolt

Connecting Rod Bolt

Connecting Rod Bolt

Connecting Rod Bolt

Clevite is the number one name in replacement engine bearings – delivering on the track and in machine shops around the country. With track proven performance in engines with thousands of horsepower, it is obvious Clevite has the strength to handle any light vehicle application.As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite Bimetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time.Clevite Bimetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These Bimetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite Bimetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an “umbrella” groove that allows for superior oil control and improved pressure.Clevite® Bimetal engine bearings are of aluminum, tin, silicon Bimetal type of material and construction. These offer the engine rebuilder an Oe type of bearing for engines going into light duty applications. They are only recommended for applications where all engine components have been reconditioned to engine manufacturers original specifications.Bimetal engine bearings are not recommended for Heavy Duty service where heavy demands are placed on the engine or High Performance applications where Clevite TriMetal is still the ultimate performance choice.

Product Features:

• Original Equipment Manufacturer
• Maximum Load-Bearing Capacity
• Fatigue-Resistant, adaptable
• Resistant to Wear and Corrosion
• Advanced Surface Coatings

Clevite is the number one name in replacement engine bearings – delivering on the track and in machine shops around the country. With track proven performance in engines with thousands of horsepower, it is obvious Clevite has the strength to handle any light vehicle application.As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite Bimetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time.Clevite Bimetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These Bimetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite Bimetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an “umbrella” groove that allows for superior oil control and improved pressure.Clevite® Bimetal engine bearings are of aluminum, tin, silicon Bimetal type of material and construction. These offer the engine rebuilder an Oe type of bearing for engines going into light duty applications. They are only recommended for applications where all engine components have been reconditioned to engine manufacturers original specifications.Bimetal engine bearings are not recommended for Heavy Duty service where heavy demands are placed on the engine or High Performance applications where Clevite TriMetal is still the ultimate performance choice.

Product Features:

• Original Equipment Manufacturer
• Maximum Load-Bearing Capacity
• Fatigue-Resistant, adaptable
• Resistant to Wear and Corrosion
• Advanced Surface Coatings

Redi-Sleeve

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

MAHLE Original piston rings lead the way in ring technology and innovation for the Aftermarket – after all, MAHLE is the largest manufacturer of piston rings in the world. MAHLE Original rings are at the forefront of light vehicle piston ring technology. Extensive OE connections mean that MAHLE Original rings have the technological edge. Things like the CP-20 oil ring, narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings and coated compression rings for diesels all came from the OE. The MAHLE Original performance line proves time and again that it should be the ring of choice under every hood – regardless of the application. Grey cast iron or ductile iron was traditionally the material of choice for automotive applications – today, steel is preferred over iron by more and more engine builders. Steel compression ring technology has been used in heavy-duty applications for over 30 years. That know-how has become essential to the design and engineering of today’s automotive engines. Steel piston rings offer higher tensile strength, higher yield strength, greater fatigue life, and greater hardness while still offering a lower ring mass. These factors lead to better stress resistance, reduced groove pound-out, longer service life, better conformability, superior oil economy, and improved blow-by control while still lowering friction.

Product Features:

• Ease of installation makes them the premier choice for rebuilders everywhere.
• The CP-20 rings can withstand the harsh operating environments in today’s engines.
• The CP-20 consists of a barrel-faced top compression ring for better seal and quicker break-in, a reverse torsional twist second ring for better oil control
• The CP-20 design oil ring that is easier to install
• Chemically polished for better oil drain-back
• A 20 degree ear angle to ensure side seal around the ring

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction