1986 Pontiac Grand Am Performance and Racing Products

Essential Performance and Racing Products for 1986 Pontiac Grand Ams

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Replacement Coil For GM Dual Connector Coil
  • Improved Turns Ratio
  • Lower Primary Resistance
  • Bolt-In replacement coil
  • Produce More Output Voltage
  • Smooth Idle
See More

MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)

Coil; GM Coil Pack; 2 Tower Style

from

$76.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.

Product Features:
  • Direct performance replacement
  • For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
  • 80:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

Brake Bleeder Screws

from

$32.59
Brake Bleeder Screws

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$40.99
Brake Bleeder Screws

B & M – Holeshot 2400 (Part No.20412)

Holeshot 2400

from

$499.99
HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

B & M – Tork Master 2400 (Part No.20404)

Tork Master 2400

from

$339.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

B & M – Tork Master 3000 (Part No.20402)

Tork Master 3000

from

$499.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
  • Washer Between Turbine and Cover
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Edelbrock – Concealed Nitrous Kits for Carbureted Applications (20-30 Hp) (Part No.70027)

Concealed Nitrous Kits for Carbureted Applications (20-30 Hp)

from

$320.99


Product Features:
  • Easily Concealable
  • Install In Minutes
  • Quick Removal
  • No Obvious Signs Of Installation
  • No Obvious Signs Of Use
See More

Edelbrock – Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp) (Part No.70090)

Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp)

from

$875.99


Product Features:
  • Designed For Carbureted V8s
  • Power Increases From 100-250 HP
  • Precision EDM Machined Spray Bars
  • Simple To Install
See More

Edelbrock – Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP) (Part No.71008)

Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP)

from

$842.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

Edelbrock – Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit (Part No.71884)

Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit

from

$266.99
Product Features:
  • Wet To Dry Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

FAG US – CUP (Part No.LM48510)

CUP

from

$7.69
CUP

Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems for Dominator (Part No.70083)

Performer RPM 2 Carb/Plate Nitrous Systems for Dominator

from

$1138.99


Product Features:
  • Designed For Carbureted V8 Engines
  • Enhanced Flow Capacity
  • Add Power In Stages
  • Softens The Hit Of The Nitrous System
  • Simple To Install
See More

Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems 4500 Series Carbs (200-400+ Hp) (Part No.70081)

Performer RPM 2 Carb/Plate Nitrous Systems 4500 Series Carbs (200-400+ Hp)

from

$830.99


Product Features:
  • Designed For Carbureted V8 Engines
  • Enhanced Flow Capacity
  • Softens The Hit Of The Nitrous System
  • Simple To Install
See More

Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)

Concealed Nitrous Kits for EFI Applications (20-30 Hp)

from

$388.99


Product Features:
  • Easily Concealable
  • Install In Minutes
  • Quick Removal
  • No Obvious Signs Of Installation
  • No Obvious Signs Of Use
See More

Edelbrock – Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp) (Part No.70004)

Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp)

from

$1113.99
Product Features:
  • Features 10 lbs. Bottle Capacity
  • For 4500 Series Carbs
  • Between 100-250 HP
  • 2-Stage Performer RPM
  • Includes All Necessary Installation Items
See More

Edelbrock – Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp) (Part No.70001)

Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp)

from

$724.99
The Edelbrock Performer Nitrous Plate System #70001 is designed to increase your power from 50-100 horsepower. Edelbrock Nitrous systems are simple to install with a 1/2″ thick aluminum plate that fits between the carburetor and the intake manifold. Edelb
See More

Edelbrock – Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp) (Part No.70050)

Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp)

from

$735.99


Product Features:
  • Designed For Carbureted V8 Engines
  • Simple To Install
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Upgrade your 1986 Pontiac Grand Am with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1986 Pontiac Grand Am, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Am functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Performance and Racing Products for the 1986 Pontiac Grand Am, designed to meet your needs without breaking the bank. From Nitrous and CO2 System replacements to Performance Transmissions upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1986 Pontiac Grand Am at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $926.99, with an average price of $332.33. Our 14 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 1986 Pontiac Grand Am without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1986 Pontiac Grand Am, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mallory MSD Ignition, and more. Mallory Performance and Racing Products start at just $85.29 and boast an impressive 5 stars average rating from customers. With 35 customer reviews and counting, our 1986 Pontiac Grand Am Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1986 Pontiac Grand Am is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Am in top shape, all in one place. Start shopping confidently below for your 1986 Pontiac Grand Am!

Best-Selling Nitrous and CO2 Systems for 1986 Pontiac Grand Ams

Enhance the driving experience in your Pontiac with 6 quality Nitrous and CO2 System components, starting at $226.99.

Edelbrock – Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp) (Part No.71006)

Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp)

from

$926.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
  • Detailed Instructions
See More

Edelbrock – Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP) (Part No.71008)

Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP)

from

$842.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

Edelbrock – Performer RPM Pro-Flo 4V EFI Systems (100-150 Hp) (Part No.70070)

Performer RPM Pro-Flo 4V EFI Systems (100-150 Hp)

from

$777.99


Product Features:
  • Designed For Pro-Flo EFI Systems
  • Simple To Install
See More

Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)

Concealed Nitrous Kits for EFI Applications (20-30 Hp)

from

$388.99


Product Features:
  • Easily Concealable
  • Install In Minutes
  • Quick Removal
  • No Obvious Signs Of Installation
  • No Obvious Signs Of Use
See More

Edelbrock – Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit (Part No.71884)

Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit

from

$266.99
Product Features:
  • Wet To Dry Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

Edelbrock – Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit (Part No.71883)

Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit

from

$226.99
Product Features:
  • Dry To Wet Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

Most Popular 1986 Pontiac Grand Am Performance Transmissions

Customize your Pontiac with 1 Performance Transmissions products like Manual Transmission Main Shaft Race, all priced under $7.69.

FAG US – CUP (Part No.LM48510)

CUP

from

$7.69
CUP

Top Picks for 1986 Pontiac Grand Am Performance Ignition Products

Upgrade Pontiac Grand Ams with top-quality Performance Ignition Products parts, including 4 OEM and aftermarket selections for your 1986 model.

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Coil; GM External HEI Coil; High Performance

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for GM dual connector coil
  • 100:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
See More

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Replacement Coil For GM Dual Connector Coil
  • Improved Turns Ratio
  • Lower Primary Resistance
  • Bolt-In replacement coil
  • Produce More Output Voltage
  • Smooth Idle
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

In-Demand Performance Engines for 1986 Pontiac Grand Ams

Select from 1 premium Performance Engines parts for your 1986 Pontiac Grand Am.

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Most Sold 1986 Pontiac Grand Am Performance Radiators

Explore our best-selling Pontiac parts for the 1986 Grand Am among 1 OEM and aftermarket options starting from $48.09.

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Top-Rated Performance and Racing Products Brands For Your 1986 Pontiac Grand Am

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1986 Pontiac Grand Ams. Below you’ll find some of our best rated Performance and Racing Products from Mallory and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1986 Grand Am start at just $65.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mallory 1986 Pontiac Grand Am Performance and Racing Products

When it comes to maintaining or upgrading your 1986 Pontiac Grand Am, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1986 Pontiac Grand Am. With over 2 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $85.29, with an average price of just $136.14. Plus, with over 3 customer reviews and an average rating of 5 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Promaster Classic Series; Ignition Coil
from
$186.99
This product is not rated

Promaster Classic Series; Ignition Coil

“”

Unilite Ignition Module
from
$85.29

(3)

Unilite Ignition Module

“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”

Popular MSD Ignition 1986 Pontiac Grand Am Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1986 Pontiac Grand Am owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1986 Grand Am, Advance Auto Parts carries a full inventory of 2 MSD Ignition Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $65.99 to $71.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Coil; GM External HEI Coil; High Performance
from
$71.99

(3)

Coil; GM External HEI Coil; High Performance

“This product is great, I also installed the msd cap and rotor and an msd ingnition 6a These products togeather create performace and a little more pow”

FAQs for 1986 Pontiac Grand Am Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1986 Pontiac Grand Ams?

Out of 14 Performance and Racing Products that fit 1986 Pontiac Grand Ams, the following parts are the top sellers:

What’s the price range for 1986 Pontiac Grand Am Performance and Racing Products?

Performance and Racing Product prices for the 1986 Pontiac Grand Am start at $7.69 and go up to $926.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1986 Pontiac Grand Am?

The average price for Performance and Racing Products for the 1986 Pontiac Grand Am is $332.33. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Grand Am model years?

Yes, we currently carry Performance and Racing Products for 26 model years of Pontiac Grand Ams between 1973 and 2005. Performance and Racing Products are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Performance and Racing Products for my 1986 Pontiac Grand Am?

The cheapest 1986 Pontiac Grand Am Performance and Racing Products we carry in stock are:

What types of Performance and Racing Products do you sell for my 1986 Pontiac Grand Am?

Can I get help with 1986 Pontiac Grand Am Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac Grand Am Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Am Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.