1986 Oldsmobile Cutlass Salon Engine Parts

Below you will find various in-demand Oldsmobile Engine Parts, components and accessories for your 1986 Cutlass Salon. Advance Auto Parts has popular Cutlass Salon parts like Engine Gaskets and Seals, Camshafts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other Cutlass Salon model years including 1975, 1976, 1977, 1978, 1979, 1980, 1985, 1987 and more. Select a category of 1986 Oldsmobile Cutlass Salon Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1986 Oldsmobile Cutlass Salon Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

OE Engine Oil Coolers

Cylinder Head Gaskets

Engine Mount Brackets

Engine Oil Pump Pickup Tube and Screens

Engine Computers

Rubber Freeze Plugs

Valve Cover Load Spreaders

Oil Pump Shafts

Timing Cover Seals

Rocker Arms

Engine Valve Stem Seals

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Oil Pump Kits

Standard Piston Rings

Timing Chains

Engine Oil Galley Plugs

Engine Valve Springs

Oil Pump Gear Thrust Plate Kits

Standard Individual Rod Bearings

Camshaft Plugs

Standard Single Pistons

Timing Crank Gears

Expansion Plugs

Camshaft Followers

Engine Oil Pump Cover Gaskets

Expansion Plug – Pipes

Fuel Pump Gaskets

Rocker Arm Shafts

Oil Pump Seals

Engine Cylinder Head Plugs

Engine Valve Locks

Rocker Arm Shaft Plugs

Camshaft Thrust Buttons

Engine Rocker Arm Pivots

Cylinder Heads

Engine Valve Spring Seat

Engine Assembly Lube

Essential Engine Parts for 1986 Oldsmobile Cutlass Salons

from

$134.99

Product Features:

Replacement Lifters For Performer Cam
50 State Legal

from

$29.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$23.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$1152.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$397.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$23.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Cast with FM132 Eutectic proprietary alloy
Performance & dependability of original equipment pistons
High quality aluminum
Utilizes ISO & QS certified manufacturing
Meets or exceeds OEM specifications

from

$21.99

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$262.99

LS engines are among the most popular for swaps for their low expense and great power potential. Unfortunately, stock LS oil pans can’t always fit where you want them to. That’s where TSP’s low-profile, retro fit oil pan comes in. Composed of lightweight cast aluminum, it is designed to allow for increased clearance to the ground and chassis. It will fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. Meticulously designed, it will mount perfectly to any wet-sump LS engine and take the stock oil filter. With a different take on our 81073, added cut-outs make the 81075 a great fit with the OEM Ford Fox Body K-member and rack and pinion. This pan also features a boss on each side for an oil return for turbochargers.

Product Features:

Oil Pan Material: Aluminum
Oil Pan Finish: Satin
Sump Style: Wet
Sump Location: Rear

from

$41.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: split-lip; 2-piece
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$0.99

This engine oil galley plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine oil galley plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Built to exceed all original equipment specifications
Provides the robust seal needed to contain peak combustion pressures and temperatures
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$10.49

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$130.99

Made In USA. Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover. Kit Includes Drive Gear, Gear and Shaft Assembly, Pressure Relief Valve, Spacer Plate Assembly, 2 Pins, 2 Springs, 9 Assembly Screws, Oil Pump Thrust Plate, Thrust Plate Gasket, 2 Pressure Relief Gaskets.

Product Features:

Includes components needed to rebuild a worn high volume oil pump providing an alternative to purchasing a new oil pump
Components are manufactured from high quality materials for durable wear
Components are precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$43.49

Made In USA. The Melling gear thrust plate kit provides a new wearing surface for Buick oil pump kits. The Melling kit typically includes a cast iron thrust place, mounting gasket, the correct length screws plus a detailed instruction sheet. A Melling gear thrust plate kit is recommended to assure correct specifications and a new surface for the oil pump gears. Assure the best Buick pump performance with a Melling gear thrust plate kit.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$33.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S348T Engine Timing Camshaft Sprocket (1 EA), S349 Engine Timing Crankshaft Sprocket (1 EA), C498 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$81.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$116.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$2.49

Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$15.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$10.29

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$5.99

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

Manufactured from high quality materials for a long service life
Torque values listed on parts (where applicable)
Easy to install
Constructed to strict engineering quality standards

from

$637.99

Melling high performance billet aluminum oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling billet aluminum oil pump series features a lightweight 6061-T6 aluminum housing and cover, a p

Product Features:

25% Higher volume high performance racing oil pump
Lightweight anodized coated billet 6061-T6 aluminum housing and cover
Patented high volume billet steel shark tooth helical gears create less oil pulsing at high RPM’s
Includes high performance 12550 chrome moly steel intermediate drive shaft with pinned steel guide
Adjustable relief valve has multiple pressure settings
Includes additional replacement pressure springs to increase or decrease 10 Pounds
Integrated adjustable oil pickup screen is designed for 7 inch oil pans
Includes oil pump mounting stud kit
For circle track racing applications

from

$9.99

Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 265-400 Small Block engines.

Product Features:

Designed for Chevrolet 265-400 Small Block engines
Features a triple chrome-plated finish
Constructed from heavy gauge steel
Engineered to improve valve cover seal

from

$34.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$5.49

Product Features:

Brand may vary by location

from

$6.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Upgrade your 1986 Oldsmobile Cutlass Salon with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1986 Oldsmobile Cutlass Salon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Engine Parts are key to keeping your Cutlass Salon functioning at its best. At Advance Auto Parts, we offer a wide selection of 173 Engine Parts for the 1986 Oldsmobile Cutlass Salon, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1986 Oldsmobile Cutlass Salon at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $674.99, with an average price of $141.86. Our 173 Engine Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 1986 Oldsmobile Cutlass Salon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1986 Oldsmobile Cutlass Salon, we stock popular OEM and aftermarket Engine Parts from top names like Sealed Power, Dorman, Imperial, and more. Sealed Power Engine Parts start at just $0.43 and boast an impressive 4.3 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Engine Parts available starting at $1.29, and at an average 4.2 stars rating. With 80 customer reviews and counting, our 1986 Oldsmobile Cutlass Salon Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1986 Oldsmobile Cutlass Salon is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Salon in top shape, all in one place. Start shopping confidently below for your 1986 Oldsmobile Cutlass Salon!

Best-Selling Engine Gaskets and Seals for 1986 Oldsmobile Cutlass Salons

Enhance the driving experience in your Oldsmobile with 9 quality Engine Gaskets and Seal components, starting at $2.99.

show more show less

from

$30.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevrolet 262,265,267,283,307,327,350,400 Gen I Small Block with Perimeter Bolt Valve Covers.

Product Features:

Provides Excellent Flange Sealing And Durability
For High-perf. Street Drag Race Oval Track

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.29

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$17.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$34.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$13.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$132.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Most Popular 1986 Oldsmobile Cutlass Salon Camshafts

Customize your Oldsmobile with 24 Camshafts products like Camshaft Followers, Camshaft Plugs, and Camshaft Bearings, all priced under $627.99.

show more show less

from

$8.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$3.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Fully Rollerized Operation; Heat-Treated Steel; Needle Roller Bearing; Meet or exceed OEM performance requirements

Product Features:

Camshaft Thrust Button utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience
Heat-Treated Steel
Needle Roller Bearing
Meet or exceed OEM performance requirements

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$627.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

High Energy 218/218 Hydraulic Flat Cam and Lifter Kit Buick 181-252 Even Fire V6

from

$619.99

High Energy 218/218 Hydraulic Flat Cam and Lifter Kit Buick 181-252 Even Fire V6

High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Buick Grand National 231 V6

from

$615.99

High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Buick Grand National 231 V6

High Energy 206/206 Hydraulic Flat Cam and Lifter Kit Buick 181-252 Even Fire V6

from

$604.99

High Energy 206/206 Hydraulic Flat Cam and Lifter Kit Buick 181-252 Even Fire V6

from

$579.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$481.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

High Energy 206/206 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$437.99

High Energy 206/206 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

High Energy 212/212 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$428.99

High Energy 212/212 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$416.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$341.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$341.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$297.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$297.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$297.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$297.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$297.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$297.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$41.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

Top Picks for 1986 Oldsmobile Cutlass Salon Engine Mounts

Upgrade Oldsmobile Cutlass Salons with top-quality Engine Mounts parts, including 7 OEM and aftermarket selections for your 1986 model.

show more show less

from

$9.29

Anchor 2328 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1965-1990
Weight approx: 2 Lbs
Part Group: 2328, 2328
Product: Made In The Usa

from

$15.99

Anchor 2382 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1977-1987
Weight approx: 3 Lbs

from

$11.99

Anchor 2384, This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1975-1987
Weight approx: 3 Lbs

from

$242.99

Product Features:

Specifically designed for bolt-in compatibility with the Hooker BlackHeart transmission swap components
Fully compatible with Holley LS swap oil pan 302-2 and accessory drive brackets.
Provides an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining usable U-joint working angles (especially in lowered vehicles)
Mounting hardware included

from

$148.99

Product Features:

When coupled with the Hooker BlackHeart transmission crossmembers 12644HKR-1, these mounting brackets locate the engine in the same nominal position (fore-aft, height, offset, etc.) as the original engine
Easily switch between LS and LT engines through a simple change of the necessary 4th Gen F-body clamshell engine mounts: 71221018HKR for LS and 71221019HKR for LT. Polyurethane inserts are the same for LS or LT.
Provides compatibility with many accessory drives: Holley Corvette style, Holley F-body style, OE Corvette, OE F-Body, OE GTO, OE Vortec Truck
Works with Hooker BlackHeart 8501HKR, 8502HKR, and 8503HKR (LS) and BHS516 and BHS3116 (LT) exhaust manifolds
100% quality hand-welded construction for strength, longevity, and good looks
Durable powder coated finish and all hardware included
Allows the use of Holley LS or LT oil pans: 302-2, 302-3, 302-20, or 302-21

from

$29.99

Product Features:

Can be used for a variety of GM vehicle applications and LS/LT swaps that utilize the common 2292 aftermarket mounts
Heavy duty 11-gauge steel construction is over 50% thicker than common aftermarket mounts
Dowels allow halves to be easily aligned
No need to drill rivets from existing shell
Durable powder coated finish
For use with Hooker BlackHeart Polyurethane Inserts – P/N’s 71221014HKR (Black) or 71221015HKR (Red) – Sold Separately
Sold individually (Consisting of one upper and one lower plate, Two required per vehicle)

from

$22.99

Product Features:

Can be used for aftermarket poly mounts or OEM rubber (Rubber Mounts are for GM 4th Gen F-Body)
Class 10.9 for strength
Zinc plated for corrosion resistance
Includes 2 flange head bolts and 2 flange nuts

In-Demand Valve Cover and Cylinder Heads for 1986 Oldsmobile Cutlass Salons

Select from 37 premium Valve Cover and Cylinder Heads parts for your 1986 Oldsmobile Cutlass Salon, with prices ranging from $0.43 to $517.99.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$21.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$3.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.49

from

$2.49

from

$2.99

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$114.99

These Mr. Gasket chrome plated steel valve covers have a smooth top with original equipment height and internal baffle. Features one breather/oil fill cap opening per valve cover. Sold as a pair. Hardware and gaskets sold separately.

Product Features:

Fits Oldsmobile 260-455 engines
Sold as a pair
Chrome plated steel construction
Long Lasting Durability
Cadmium Plated To Resist Corrosion
Easy Installation

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$25.49

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Magnum Rocker Arm and Pushrod Kit for AMC 290-401

from

$517.99

Magnum Rocker Arm and Pushrod Kit for AMC 290-401

Performance Series EDM Solid Lifter Set Cadillac, Chevrolet, Olds and Pontiac.

from

$432.99

Performance Series EDM Solid Lifter Set Cadillac, Chevrolet, Olds and Pontiac.

from

$368.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$327.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$294.99

16 Springs

from

$266.99

HE RKR OLDS 1.6 PED

from

$241.99

ENGINE ROCKER ARM

Pro Magnum Hydraulic Flat Lifter Set for Oldsmobile 260-455 and Pontiac 326-455.

from

$231.99

Pro Magnum Hydraulic Flat Lifter Set for Oldsmobile 260-455 and Pontiac 326-455.

Magnum 7.850" Long, .080" Wall, 5/16" Diameter Pushrod Set

from

$225.99

Magnum 7.850" Long, .080" Wall, 5/16" Diameter Pushrod Set

Performance Series Solid Lifter Set for Cadillac, Chevrolet, Olds and Pontiac

from

$206.99

Performance Series Solid Lifter Set for Cadillac, Chevrolet, Olds and Pontiac

High Energy Hydraulic Flat Lifter Set for Buick 181-252 V6

from

$102.99

High Energy Hydraulic Flat Lifter Set for Buick 181-252 V6

from

$83.99

Engine Valve Spring Kit

7 Degree Steel Retainer Set of 12 for 11/32" Valve with 1.437"-1.500" Spring

from

$61.99

7 Degree Steel Retainer Set of 12 for 11/32" Valve with 1.437"-1.500" Spring

from

$34.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

Most Sold 1986 Oldsmobile Cutlass Salon Engine Timing Parts

Explore our best-selling Oldsmobile parts for the 1986 Cutlass Salon among 17 OEM and aftermarket options starting from $7.49.

show more show less

from

$22.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$33.99

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$9.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$127.99

Billet Camshaft Sprocket for Superior Street Performance. Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$15.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$20.99

Street Performance 3/8″ Pitch Double Roller Replacement TRUE Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

Xtreme Energy 230/236 Hydraulic Flat Cam SK-Kit for Oldsmobile 260-455

from

$653.99

Xtreme Energy 230/236 Hydraulic Flat Cam SK-Kit for Oldsmobile 260-455

from

$179.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$68.99

High Performance 3/8″ Pitch Double Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$51.99

ENGINE TIMING SET

from

$38.99

ENGINE TIMING SET

from

$29.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$29.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$12.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$10.49

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$7.49

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$7.49

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top-Rated Engine Parts Brands For Your 1986 Oldsmobile Cutlass Salon

Shop for the best-rated brands offering Engine Parts and other products for your 1986 Oldsmobile Cutlass Salons. Below you’ll find some of our best rated Engine Parts from Sealed Power, Dorman, and Imperial, and more. Engine Parts from these brands that fit a 1986 Cutlass Salon start at just $0.43 and are rated as high as 4.3 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Sealed Power 1986 Oldsmobile Cutlass Salon Engine Parts

When it comes to maintaining or upgrading your 1986 Oldsmobile Cutlass Salon, using quality Engine Parts is essential to ensure durability and a perfect fit. Sealed Power ticks all of those boxes. We offer a wide selection of Sealed Power Engine Parts, specifically designed for the 1986 Oldsmobile Cutlass Salon. With over 2 Sealed Power brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $0.43, with an average price of just $1.71. Plus, with over 3 customer reviews and an average rating of 4.3 stars, you can trust that our Sealed Power Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $0.43

(2)

Engine Valve Spring Retainer Keeper

“You guys are always great”

from $2.99

(1)

Engine Rocker Arm Pivot

“[…]”

Popular Dorman 1986 Oldsmobile Cutlass Salon Engine Parts

Dorman auto parts is one of the highest quality Engine Part brands in the market. Any 1986 Oldsmobile Cutlass Salon owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1986 Cutlass Salon, Advance Auto Parts carries a full inventory of 3 Dorman Engine Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Dorman Engine Parts range from $1.29 to $7.49, plus, with more than 6 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $7.49

(2)

Rubber Expansion Plug 1 In. – Size Range 1 In. – 1-1/8 In.

“Needed plug for transmission. Seems to be working.”

from $1.29

(3)

Steel Cup Expansion Plug 1-1/2 In., Height 0.220

“worked out great. no problems”

from $3.99

(1)

Steel Cup Expansion Plug 1-9/16 In., Height 0.380

“great replacement plug”

FAQs for 1986 Oldsmobile Cutlass Salon Engine Parts

Which Engine Parts are best-sellers for 1986 Oldsmobile Cutlass Salons?

Out of 173 Engine Parts that fit 1986 Oldsmobile Cutlass Salons, the following parts are the top sellers:

Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (5701295) – $9.49
Engine Valve Lifter (3690024) – $21.99
Rubber Expansion Plug 1 In. – Size Range 1 In. – 1-1/8 In. (5701252) – $7.49

What’s the price range for 1986 Oldsmobile Cutlass Salon Engine Parts?

Engine Part prices for the 1986 Oldsmobile Cutlass Salon start at $0.43 and go up to $674.99 for the most premium parts.

What’s the average price of a Engine Part for a 1986 Oldsmobile Cutlass Salon?

The average price for Engine Parts for the 1986 Oldsmobile Cutlass Salon is $141.86. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Oldsmobile Cutlass Salon model years?

Yes, we currently carry Engine Parts for 7 model years of Oldsmobile Cutlass Salons between 1975 and 1987. Engine Parts are bought most frequently for the following model years: 1987, 1985, 1980, 1979, 1978, 1977, 1976, and 1975.

What are the cheapest Engine Parts for my 1986 Oldsmobile Cutlass Salon?

The cheapest 1986 Oldsmobile Cutlass Salon Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Steel Cup Expansion Plug 29/32 In., Height 0.310 (sold by each) (22146595) – $0.99
Steel Cup Expansion Plug 1-1/2 In., Height 0.220 (3492249) – $1.29
Steel Cup Expansion Plug 1-7/32 In., Height 0.500 (sold by each) (22140593) – $1.29
Steel Cup Expansion Plug 1-1/8 In., Height 0.505 (sold by each) (16140180) – $1.79

What are the top-rated Engine Parts that fit the 1986 Oldsmobile Cutlass Salon?

Out of 80 reviews by customers, our 1986 Oldsmobile Cutlass Salon Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1986 Oldsmobile Cutlass Salon and their top-rated products:

Engine Gaskets and Seals
- High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (5021847) – $30.99
- Engine Valve Cover Gasket Set (5182611) – $22.99
- Engine Valve Cover Gasket Set (5781892) – $26.99
Valve Cover and Cylinder Heads
- High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (5021847) – $30.99
- Engine Valve Cover Gasket Set (5182611) – $22.99
- Engine Valve Cover Gasket Set (5781892) – $26.99

What types of Engine Parts do you sell for my 1986 Oldsmobile Cutlass Salon?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1986 Oldsmobile Cutlass Salon:

Can I get help with 1986 Oldsmobile Cutlass Salon Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Engine Parts and more.

What is your return policy for Oldsmobile Cutlass Salon Engine Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Salon Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1986 Oldsmobile Cutlass Salon Engine Parts

Edelbrock – Performer-Plus Hydraulic Flat Tappet Lifters (Part No.9738)

Dayco – TIMING CHAIN KIT (Part No.KTC1393)

Melling – Stock Replacement Oil Pump Screen (Part No.55-S1)

Competition Cams – Xtreme Energy 212/218 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-412-8)

Spartan – Engine Cylinder Head; Olds 350 77-80 Cyl Head (Part No.2O04)

Sealed Power – Engine Piston (Part No.W454NP)

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-55E)

Top Street Performance – Satin Aluminum Low-profile Retro-fit LS 5.7 Quart Oil Pan with Added Clearance (Part No.81075)

National – Engine Crankshaft Seal (Part No.5118)

Dorman – Steel Cup Expansion Plug 29/32 In., Height 0.310 (sold by each) (Part No.555-015)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8510 PT)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S348T)

Melling – High Volume Oil Pump Repair Kit (Part No.K-20IPHV)

Melling – Oil Pump Thrust Plate Kit (Part No.P-20I)

Cloyes Gear – Engine Timing Set (Part No.C-3006K)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.8-2555A 1)

Felpro – PermaTorque Engine Gasket Set (Part No.FS 8507 PT)

Sealed Power – Engine Push Rod (Part No.RP-3197)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 12869 R)

Cloyes Gear – Engine Timing Chain (Part No.C359)

Sealed Power – Engine Connecting Rod Bearing (Part No.3045A)

Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)

Melling Select Performance – High Performance High Volume Billet Aluminum Circle Track Oil Pump (Part No.10050ST-700CT)

Spectre – Valve Cover Clamps SB (Part No.5321)

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Driveworks – Oil Pump Seal (Part No.S-222025)

National – Multi-Purpose Seal (Part No.222025)

Mr. Gasket – High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (Part No.175)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13403 C)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50259 R)

Felpro – Engine Oil Pump Gasket (Part No.70032)

Felpro – VALVE COVER GASKET SET (Part No.VS 50156 C)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50156 T)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72623)

Felpro – Engine Gasket Set (Part No.260-1477)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Sealed Power – Engine Valve Lifter (Part No.HT-969)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)

Dorman – Steel Cup Expansion Plug 2-7/64 In., Height 0.310 (sold by each) (Part No.555-080)

Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)

Cloyes Gear – Engine Camshaft Thrust Button (Part No.9-5193)

Dorman – Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each) (Part No.555-085)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam K-Kit (Part No.K42-221-4)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit Buick 181-252 Even Fire V6 (Part No.CL69-246-4)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Buick Grand National 231 V6 (Part No.CL69-248-4)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit Buick 181-252 Even Fire V6 (Part No.CL69-234-4)

Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam K-Kit (Part No.K42-229-4)

Competition Cams – Mutha’ Thumpr 234/249 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-601-5)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam for Buick 181-252 Even Fire V6 (Part No.69-234-4)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam for Buick 181-252 Even Fire V6 (Part No.69-235-4)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-223-4)

Competition Cams – Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam (Part No.42-602-5)

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)

Competition Cams – Magnum/Marine 244/244 Hydraulic Flat Cam (Part No.42-236-4)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.42-224-4)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.42-308-4)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam (Part No.42-228-4)

Competition Cams – Magnum/Marine/Magnum Muscle 230/230 Hydraulic Flat Cam (Part No.42-231-4)

Competition Cams – Magnum 253/253 Hydraulic Flat Cam (Part No.42-237-4)

Sealed Power – Engine Camshaft Bearing Set (Part No.1466M)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2328)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2382)

Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2384)

Hooker BlackHeart – Hooker BlackHeart Engine Mount Brackets (Part No.12643HKR)

Hooker BlackHeart – Hooker BlackHeart LS/LT Engine Mount Brackets – G-Body (Part No.BHS5179)

Hooker BlackHeart – Hooker BlackHeart Heavy Duty Clamshell Engine Mounts (Part No.71221004HKR)

Hooker BlackHeart – Hooker BlackHeart Engine Mount Thru Bolt Hardware Kit (Part No.71223015HKR)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Sealed Power – Engine Rocker Arm Pivot (Part No.MR-1903)

Sealed Power – Engine Valve Lifter (Part No.HT-2104)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-1/2 In., Height 0.480 (Part No.362650.1)

Sealed Power – Engine Rocker Arm Bridge (Part No.MR-1840)

Sealed Power – Engine Push Rod (Part No.RP-3164)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-1/8 In., SC, Height 0.470 (Part No.362639.1)

Mr. Gasket – Valve Cover (Part No.9422)

Competition Cams – Super Valve Locks, 11/32" 1 St (Part No.611-16)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8723 PT-1)

Competition Cams – Magnum Rocker Arm and Pushrod Kit for AMC 290-401 (Part No.RPM1410-16)