Name: Ignition Control Module
Brand: Carquest Premium
SKU: CBC1669
Price: 1962.99 USD

from

$1962.99

Ignition Control Module

from

$444.99

NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain European models, NGK utilizes a premium 29 gauge galvanized, tinned core wire. RFI suppression is located close to the source and thus built into NGK’s OE designed spark plug and distributor connectors and metallic resistor boots. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal.

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$235.74

The Beru Ignition Wires comply exactly with OEM requirements and thus guarantee precise fitting, optimal engine performance and economical fuel consumption.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Copper core construction
Resistant to high voltages up to 40,000 Volts.
Absolutely waterproof.
Resistant to high temperatures, corrosion and vibration
Reliable connection system.
Ignition noise suppressed. (VDE standard).

from

$54.67

The task of the connector is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$29.65

The Bosch Ignition Wire Connector is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$3.99

The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.

Product Features:

Opens spark face for better ignitability of flame kernel
Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
Dyno testing has shown proven power gains
Cut-back ground electrode evolved from practice of grinding back the side electrode

from

$4.99

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$663.10

Cardone Remanufactured Distributors are built to last using the highest quality OE materials and technologically advanced processes. All distributors are 100% tested to assure that they meet or exceed original equipment specifications. Automated test equipment verifies signal strength, correct polarity of wire harness, air gap and coil performance. Precise machining tolerances prevent oil leaks, poor timing, setting of “check engine light” and premature failure. Gear hardness determined by application so as to not damage or pre-maturely wear out related components. All electronic modules are 100 percent tested to ensure full functionality. Every unit is 100 percent tested to ensure quality and reliability.

Product Features:

Automated test equipment verifies signal strength, correct polarity of wire harness, air gap and coil performance
Precise machining tolerances prevent oil leaks, poor timing, setting of “check engine light” and premature failure
Gear hardness determined by application so as to not damage or pre-maturely wear out related components
All electronic modules are 100% tested to ensure full functionality
Every unit is 100% tested to ensure quality and reliability

from

$44.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$75.44

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

Superior Surface Finish
RFI Resistors (Asian) / RFI Suppression (European)
Installation Screws
Precision-machined Contacts
Finely -tooled Metal Mounting Sleeve (Asian)

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$197.48

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

Superior Surface Finish
RFI Resistors (Asian) / RFI Suppression (European)
Installation Screws
Precision-machined Contacts
Finely -tooled Metal Mounting Sleeve (Asian)

from

$101.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$95.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$133.70

High-performance ignition coils from Bosch guarantee a reliable voltage from the start, more ignition energy to ensure that your engine starts and runs smoothly. Bosch ignition systems combine the security of fully developed system engineering with the employment of the latest technology. The application of Bosch ignition coils ensures all advantages of the original equipment. Bosch Ignition coils provide more ignition energy to ensure that your engine starts well and runs smoothly. High-performance ignition coils from Bosch guarantee a reliable voltage from the start.

Product Features:

Demand controlled ignition voltage
Long spark duration
Better engine performance
Reduced fuel consumption
Reduced obnoxious emissions in exhaust gas

from

$51.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.