1986 Isuzu Impulse Ignition Boots
More 1986 Isuzu Impulse Ignition Boots
Find your specific 1986 Isuzu Impulse original or aftermarket Ignition Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1986 Isuzu Impulse Ignition Boots
Intermotor Red Wire – Spark Plug Wire Set (Part No.50574)
from
$73.49
Spark Plug Wire Set
Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4209)
from
$28.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – Spark Plug Wire Set: Variable Pitch Magnetic Core, Lifetime Warranty (Part No.4393)
from
$45.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK variable pitch magnetic core cables produce the necessary impedance to suppress interference throughout the entire frequency spectrum for exceptional EMI/RFI noise suppression. OE or better specified spark plug and distributor boots ensure the highest quality fit, performance and durability in every application. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal. Stainless steel terminals utilizing up to 3 serrated crimps bite into cable jacket and inner insulation for the highest terminal retention strength (wherever possible). Locking C-shaped spring clip with corrosion-resistant plating ensures a secure and positive spark plug terminal connection.
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
NGK – Spark Plug Wire Set (Part No.4395)
from
$110.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
DENSO – First Time Fit Ignition Wire Set (Part No.F1020332890ND)
from
$79.13
The Denso First Time Fit ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40F to 428 F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Carbon fiberglass core for superior conductivity.
- Fiberglass braiding for strength.
- Conductive silicone layer for EMI/RFI noise suppression.
- Silicone insulation for superior dielectric and heat performance.
- Reinforced Kevlar core.
Intermotor Red Wire – Spark Plug Wire Set (Part No.51474)
from
$29.49
Spark Plug Wire Set
Popular 1986 Isuzu Impulse Ignition Boots Categories
1986 Isuzu Impulse Ignition Boots
Maybe you’re in the middle of a full rebuild of that 1986 Isuzu Impulse. Maybe you just need a couple of Ignition Boots. Either way, Advance Auto Parts has 4 different Ignition Boots in our inventory ranging from $28.99 to $79.13. That means you can find the exact parts or products you need to keep that 1986 Isuzu Impulse running smoothly.
Ignition Boots are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Isuzu Impulse. Carquest Premium, NGK, and DENSO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Boots for your 1986 Isuzu Impulse, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Boots to keep your 1986 Isuzu Impulse rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Boots Brands To Make Your 1986 Isuzu Impulse Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Isuzu Impulse demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Impulse the best it can be. Be sure to browse some of our top Ignition Boots brands and parts.
FAQs for 1986 Isuzu Impulse Ignition Boots
What are the most purchased Ignition Boots for the 1986 Isuzu Impulse?
Out of 4 Ignition Boots for the 1986 Isuzu Impulse, the most popular in our inventory are:
from
$28.99
This product is not rated
Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit
Spark Plug Boots
from
$45.99
This product is not rated
Spark Plug Wire Set: Variable Pitch Magnetic Core, Lifetime Warranty
Spark Plug Boots
