1986 Honda CRX Brake Parts

Name: Brake Hydraulic Hose
Brand: Carquest Wearever
SKU: BHA38731
Price: 42.99 USD

Below you will find various in-demand Honda Brake Parts, components and accessories for your 1986 CRX. Advance Auto Parts has popular CRX parts like Brake Kits, Wheel Cylinders, Brake Rotors and Drums and more. You’ll also find aftermarket and OEM Brake Parts for other CRX model years including 1985, 1987, 1988, 1989, 1990, 1991 and more. Select a category of 1986 Honda CRX Brake Parts below and start saving instantly.

Popular 1986 Honda CRX Brake Parts Categories

Front Brake Rotors

Rear Brake Pads and Shoes

Front Brake Pads and Shoes

Rear Brake Drums

Brake Wheel Cylinders

Power Brake Boosters

Brake Self Adjuster Kits

Brake Caliper Guide Pin Boot Kits

Brake Master Cylinders

Brake Disc Screws

Brake Hoses

Brake Hardware Kits

Master Cylinder Caps and Gaskets

Essential Brake Parts for 1986 Honda CRXes

from

$42.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$12.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$4.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Maintains proper movement for safe, effective stopping performance
Prevents noise and premature wear

from

$16.99

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
New Brake Hardware prevents premature wear
Helps deliver a quieter, more efficient braking system
Manufactured with quality materials to suppress high stress levels
Corrosion Resistant Coated Stainless Steel

from

$16.79

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

Manufactured to restrain high tolerances with quality materials
Coated to eliminate heat and corrosion deterioration
This part matches Original Equipment (OE) quality specifications

from

$59.99

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$38.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.
Plastic reservoirs are 100% vacuum-tested to ensure proper function

from

$50.99

This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

The Brembo brake disc is fully interchangeable with an Original Equipment brake disc. The control of the entire production cycle allows Brembo to offer brake discs with outstanding performance levels, reliability, durability and comfort in all conditions of use. All Brembo brake discs are accompanied by the ECE-R90 homologation.

Product Features:

UV Coating for the entire disc. An environmentally friendly protective coating with a high resistance to corrosion & can be installed right out of the box
Supplied with necessary fixing hardware
Total control over the entire process

from

$67.99

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to prevent warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$6.39

This disc brake rotor set screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this disc brake rotor set screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.99

Direct replacement – this disc brake rotor set screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$62.99

Carquest Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. Carquest Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.

Product Features:

Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE design to dissipate heat, increasing brake shoe life
Proper harmonic design and balance helps to reduce brake noise
Optimal metallurgy and casting thickness to preventing warping
Ready for immediate “out-of-the-box” installation (after cleaning)

from

$23.99

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

from

$28.99

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

from

$17.99

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$43.99

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$43.99

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$48.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium stainless-steel hardware for easy installation

from

$43.99

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$32.99

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$48.99

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium stainless-steel hardware for easy installation

from

$19.99

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span and maximizes performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$87.99

Wearever power brake boosters are built to meet or exceed original equipment (OE) performance standards for fit, form and function. Every brake booster is completely disassembled, cleaned, inspected, and remanufactured with OE-quality components. We also use reverse engineering to gain insight into why the original unit failed, often resulting in an improved product. All Wearever power brake boosters are 100 percent tested to ensure proper fit and function.

Product Features:

100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
New mounting nuts and washers ensure proper, hassle-free installation.
All units are 100 percent tested to ensure reliable performance.
Guaranteed fit and function.
Meets or exceeds O.E. performance.

from

$90.99

100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
New mounting nuts and washers ensure proper, hassle-free installation.
All units are 100 percent tested to ensure reliable performance.
Guaranteed fit and function.
Meets or exceeds O.E. performance.

from

$82.99

100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
New mounting nuts and washers ensure proper, hassle-free installation.
All units are 100 percent tested to ensure reliable performance.
Guaranteed fit and function.
Meets or exceeds O.E. performance.

Upgrade your 1986 Honda CRX with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1986 Honda CRX, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Brake Parts are key to keeping your CRX functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Brake Parts for the 1986 Honda CRX, designed to meet your needs without breaking the bank. From Brake Kit replacements to Wheel Cylinders upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1986 Honda CRX at great prices. Our Brake Parts inventory for this model ranges from just $4.99 to $82.99, with an average price of $33.55. Our 20 Brake Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1986 Honda CRX without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1986 Honda CRX, we stock popular OEM and aftermarket Brake Parts from top names like Carquest Dorman, and more. Carquest Brake Parts start at just $4.99 and boast an impressive 4.4 stars average rating from customers. With 118 customer reviews and counting, our 1986 Honda CRX Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1986 Honda CRX is always ready to roll. We’re committed to providing you with everything you need to keep your CRX in top shape, all in one place. Start shopping confidently below for your 1986 Honda CRX!

Best-Selling Brake Kits for 1986 Honda CRXes

Enhance the driving experience in your Honda with 3 quality Brake Kit components, starting at $4.99.

show more show less

from

$16.79

Manufactured to restrain high tolerances with quality materials
Coated to eliminate heat and corrosion deterioration
This part matches Original Equipment (OE) quality specifications

from

$4.99

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Maintains proper movement for safe, effective stopping performance
Prevents noise and premature wear

from

$19.99

This part matches Original Equipment (OE) quality specifications
Increases the life span and maximizes performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

Top Picks for 1986 Honda CRX Brake Rotors and Drums

Upgrade Honda CRXes with top-quality Brake Rotors and Drums parts, including 2 OEM and aftermarket selections for your 1986 model.

show more show less

from

$62.99

Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE design to dissipate heat, increasing brake shoe life
Proper harmonic design and balance helps to reduce brake noise
Optimal metallurgy and casting thickness to preventing warping
Ready for immediate “out-of-the-box” installation (after cleaning)

from

$58.99

UV Coating for the entire disc. An environmentally friendly protective coating with a high resistance to corrosion & can be installed right out of the box
Supplied with necessary fixing hardware
Total control over the entire process

In-Demand Brake Pads and Shoes for 1986 Honda CRXes

Select from 6 premium Brake Pads and Shoes parts for your 1986 Honda CRX, with prices ranging from $15.00 to $48.99.

show more show less

from

$32.99

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$32.99

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$35.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$48.99

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium stainless-steel hardware for easy installation

from

$43.99

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$15.00

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

Most Sold 1986 Honda CRX Brake Hoses

Explore our best-selling Honda parts for the 1986 CRX among 2 OEM and aftermarket options starting from $12.99.

show more show less

from

$12.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$31.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

Top-Rated Brake Parts Brands For Your 1986 Honda CRX

Shop for the best-rated brands offering Brake Parts and other products for your 1986 Honda CRXes. Below you’ll find some of our best rated Brake Parts from Carquest and Dorman, and more. Brake Parts from these brands that fit a 1986 CRX start at just $4.99 and are rated as high as 4.4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1986 Honda CRX Brake Parts

When it comes to maintaining or upgrading your 1986 Honda CRX, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1986 Honda CRX. With over 3 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $28.26. Plus, with over 36 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.79

(2)

Drum Brake Hardware Combi-Kit

“This was the exact kit that I needed for my 1995 Honda Civic DX 2 door coupe 5 speed manual transmission. I was at a good price, and delivered to my d”

from $62.99

(1)

Brake Drum

“Worked well”

from $4.99

(33)

Disc Brake Caliper Guide Pin Boot Kit

“Good product”

Popular Dorman 1986 Honda CRX Brake Parts

Dorman auto parts is one of the highest quality Brake Part brands in the market. Any 1986 Honda CRX owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1986 CRX, Advance Auto Parts carries a full inventory of 3 Dorman Brake Parts. Plus you will be keeping your Honda in peak condition while saving money because prices on these Dorman Brake Parts range from $6.39 to $50.99, plus, with more than 17 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from $6.39

(8)

Disc Brake Rotor Retaining Screws

“Exact fit for 2011 Hyundai sonata SE/LE”

from $7.99

(8)

Disc Brake Rotor Retaining Screw Assortment

“Small screws fits front 2020 kia soul rotors. Easy install.”

from $50.99

(1)

Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack

“My daughter’s Honda CRV’s brake light came on, would not reset, even after topping off the fluid reservoir and wiping the cap’s float clean. The parki”

FAQs for 1986 Honda CRX Brake Parts

Which Brake Parts are best-sellers for 1986 Honda CRXes?

Out of 20 Brake Parts that fit 1986 Honda CRXes, the following parts are the top sellers:

Disc Brake Rotor Retaining Screw Assortment (22142410) – $7.99
Disc Brake Rotor Retaining Screws (17190233) – $6.39
Brake Hose Assembly: Copper Washers Included (18650368) – $12.99

What’s the price range for 1986 Honda CRX Brake Parts?

Brake Part prices for the 1986 Honda CRX start at $4.99 and go up to $82.99 for the most premium parts.

What’s the average price of a Brake Part for a 1986 Honda CRX?

The average price for Brake Parts for the 1986 Honda CRX is $33.55. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Honda CRX model years?

Yes, we currently carry Brake Parts for 5 model years of Honda CRXes between 1985 and 1991. Brake Parts are bought most frequently for the following model years: 1991, 1990, 1989, 1988, 1987, and 1985.

What are the cheapest Brake Parts for my 1986 Honda CRX?

The cheapest 1986 Honda CRX Brake Parts we carry in stock are:

Disc Brake Caliper Guide Pin Boot Kit (3552861) – $4.99
Disc Brake Rotor Retaining Screws (17190233) – $6.39
Disc Brake Rotor Retaining Screw Assortment (22142410) – $7.99
Brake Hose Assembly: Copper Washers Included (18650368) – $12.99
Brake Pads: Reliable and Dependable Stopping – Front (5750288) – $15.00

What are the top-rated Brake Parts that fit the 1986 Honda CRX?

Out of 118 reviews by customers, our 1986 Honda CRX Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1986 Honda CRX and their top-rated products:

Brake Rotors and Drums
- Brake Drum (3565963) – $62.99
Brake Pads and Shoes
- Brake Drum (3565963) – $62.99

What types of Brake Parts do you sell for my 1986 Honda CRX?

As of 11/2/25, these are some of the most in-demand types of Brake Parts for a 1986 Honda CRX:

Can I get help with 1986 Honda CRX Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Brake Parts and more.

What is your return policy for Honda CRX Brake Parts?

Advance Auto Parts keeps returns simple. For new Honda CRX Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1986 Honda CRX Brake Parts

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA38731)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38218)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.18010A)

Carquest Wearever – Disc Brake Hardware Kit (Part No.15603A)

Carquest Wearever – Drum Brake Hardware Combi-Kit (Part No.17135)

Carquest Wearever – New Brake Master Cylinder: with Reservoir, Exact Fit, 0.813" Bore (Part No.MCA39426)

Wearever – Remanufactured Brake Master Cylinder (Part No.11-2280)

Dorman – Help – Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack (Part No.42038)

Brembo – Premium Vented Brake Rotor (Part No.09.5023.10)

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141581)

Dorman – Help – Disc Brake Rotor Retaining Screws (Part No.13824)

Dorman – Help – Disc Brake Rotor Retaining Screw Assortment (Part No.13822)

Carquest Wearever – Brake Drum (Part No.YH140474)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37847)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37846)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37582)

PowerStop – Z16 Low-Dust Ceramic Brake Pads – Front (Part No.16-256)

PowerStop – Z16 Low-Dust Ceramic Brake Pads – Front (Part No.16-373)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Front (Part No.17-256)

PowerStop – Z16 Low-Dust Ceramic Brake Pads – Rear (Part No.16-374)

Carquest Wearever – Brake Shoes (Part No.S546)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Rear (Part No.17-374)

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2639)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5472)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5412)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5470)

Carquest Wearever – Drum Brake Hardware Combi-Kit (Part No.17135)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.18010A)

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2639)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37582)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37581)

Carquest Wearever – Brake Drum (Part No.YH140474)

Brembo – Premium Vented Brake Rotor (Part No.09.3102.10)

Carquest Wearever – Brake Shoes (Part No.S546)

Carquest Wearever – Brake Shoes (Part No.S639)

Carquest Standard – Brake Pads: Semi-Metallic, Reliable and Dependable Stopping – Front (Part No.MKD256)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Front (Part No.17-256)

PowerStop – Z16 Low-Dust Ceramic Brake Pads – Front (Part No.16-256)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping – Front (Part No.NAD177)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38218)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA38280)