1986 Honda Civic Alternators and Starters
More 1986 Honda Civic Alternators and Starters Categories
If you’re looking for an original Alternators and Starters replacement for a 1986 Honda Civic, you can search through our selection below. You’ll also find aftermarket and OEM Alternators and Starters to meet your needs.
Essential 1986 Honda Civic Alternators and Starters
OE+ – Remanufactured Alternator (Part No.F40001998964IAP)
from
$228.99
Are you looking for a quality replacement part for your vehicle’s electrical system? Today’s remanufactured alternator is a complex combination of inner workings, and we completely remanufacture them to our own premium standard. All terminals are cleaned and replated. The slip rings are polished or replaced to maintain proper contact. The rectifier, diodes, rotor and bearings are performance tested or replaced for maximum output. All housings are cleaned and refinished and all stators are tested for integrity and recoated for corrosion prevention.
Product Features:
See More
Product Features:
- OE-Equivalent Direct Fit Application.
- Fully tested to meet OE specifications.
- Provides exceptional reliability.
Carquest Professional – Alternator: New, 110 Amps (Part No.13980AN)
from
$229.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- All new components are utilized to ensure long service life
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
- Rotors and stators are load tested and double insulated for maximum charging performance
- All units are 100% triple tested to ensure quality and performance
Bosch – Alternator: Remanufactured, 80 Amps (Part No.AL1299X)
from
$187.99
Bosch has been a major supplier of new alternators to Original Equipment vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators. Bosch Premium Alternators are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Carquest Premium – Alternator Brush Set (Part No.XAA1126)
from
$4.29
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
DENSO – First Time Fit Alternator Brush Assembly (Part No.F402097917ND)
from
$51.93
The Denso Alternator Brush Assembly is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.202)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.202-S)
from
$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Ball Bearing (Part No.S-201-CC)
from
$1.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest – Ignition Lock Cylinder and Switch (Part No.CS607)
from
$128.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Ignition Lock Cylinder CSA3407 (Part No.CSA3407)
from
$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Lock Cylinder CSA3399 (Part No.CSA3399)
from
$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest – Ignition Lock Cylinder and Switch (Part No.CS630)
from
$124.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
National – Bearings (Part No.303-CC)
from
$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Nachi – Pilot Bearing (Part No.I101035528NAC)
from
$10.36
The Nachi pilot bearing is manufactured in accordance to strict OEM specifications for performance and durability.
Product Features:
See More
Product Features:
- OEM supplier of clutch pilot bearings for Acura and Honda
- Adopted original seal design to prevent contamination and grease leakage
- Contains special grease for wider temperature ranges and longer life
- Smooth and quiet operation
- Lower rotating torque by improving seal lips
- Compact design for lightweight to achieve high performance
National – Bearings (Part No.305)
from
$40.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Starter Solenoid (Part No.SSC1063)
from
$57.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Starter Solenoid (Part No.SBC3141)
from
$55.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Starter Solenoid (Part No.SBC4805)
from
$114.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Starter Solenoid (Part No.SBC2291)
from
$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Starter Solenoid (Part No.SAC5083)
from
$304.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Starter Solenoid (Part No.SBC4806)
from
$61.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Starter Remanufactured Premium (Part No.17962S)
from
$171.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter Remanufactured Premium (Part No.16843S)
from
$119.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
DENSO – First Time Fit Starter, Remanufactured (Part No.F5000447429ND)
from
$203.85
DENSO remanufactured starters are subjected to rigorous testing; Armatures and field coils are high-voltage tested; commutators are refinished and performance-validated; terminals and fasteners are replaced with high-quality copper components. Every starter is exactingly bench-tested to ensure factory-original performance.
Product Features:
See More
Product Features:
- High-voltage tested armature and field coils to ensure reliable performance
- Premium copper terminals to ensure a clean source of electrical current
- All-new bearings, brushes, and seals
- Maximum cranking torque under all conditions
- Class leaders in size and weight
- Environmentally designed to start in cold and hot weather conditions
Carquest Premium – Starter Remanufactured Premium (Part No.16736S)
from
$15.00
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter Remanufactured Premium (Part No.16902S)
from
$105.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter Remanufactured Premium (Part No.16913S)
from
$93.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Popular 1986 Honda Civic Alternators and Starters Categories
1986 Honda Civic Alternators and Starters
You count on your 1986 Honda Civic to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Alternators and Starters. With 11 Alternators and Starters ranging in price from $1.99 to $132.99, you’re sure to find everything you need for your 1986 Honda Civic.
Brands matter. If you want to shop a specific Alternators and Starters brand, we stock 3 different brands like Driveworks, Carquest Premium, and National. 1986 Honda Civic Alternators and Starters start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Alternators and Starters is by asking professionals. Short of that, you can shop with confidence thanks to our 532 extensive product reviews on 1986 Honda Civic Alternators and Starters.
Did we mention you can order your Alternators and Starters from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Alternators and Starters inventory for your 1986 Honda Civic below to get started!
Top-Rated Alternators and Starters Brands For Your 1986 Honda Civic
Trusted Alternators and Starters OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Honda Civic running right for years to come. In our inventory you’ll find brands like Driveworks, Carquest Premium, National, and even more.
Popular Carquest Premium Alternators and Starters
You’ll find popular Carquest Premium brand products across Starter Parts. All are waiting to get your 1986 Honda Civic back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 1986 Honda Civic Alternators and Starters
What are the most purchased Alternators and Starters for the 1986 Honda Civic?
Out of 11 Alternators and Starters for the 1986 Honda Civic, the most popular in our inventory are:
