1986 GMC P2500 Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1986 GMC P2500s

Carquest – Fuel Tank Selector Valve (Part No.FSV3)

Fuel Tank Selector Valve

from

$84.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Robust designs backed by focused research meet today’s technical needs
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1342)

Exhaust Gas Recirculation (EGR) Valve

from

$45.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
  • Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Secondary Air Injection Pump Check Valve

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Cardone – Remanufactured Smog Air Pump (Part No.32-273)

Remanufactured Smog Air Pump

from

$165.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:
  • 100% testing of all units guarantees reliable performance every time.
  • High temperature grease extends bearing life, resulting in longer pump life.
  • New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M performance.
See More

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11013)

Remanufactured Diesel Fuel Injector

from

$77.99
CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:
  • Premium OE quality materials
  • Includes copper combustion seal
See More

Delphi – Fuel Lift Pump: With Washers, Nut/Bolt, Bracket (Part No.HFP905)

Fuel Lift Pump: With Washers, Nut/Bolt, Bracket

from

$85.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • All pumps are functionally tested for correct operation which improves pump reliability
  • Exact fit original equipment replacements means easy installation
  • Consistent pressure at all operating temperatures results in quick start-ups.
  • Pump is designed for diesel engines and applications
  • Always check fuel filter when replacing the fuel pump
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1511470)

Fuel Tank Lock Ring

from

$23.99
Carquest Premium fuel tank lock rings are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:
  • Engineered to meet or exceed all OEM specifications.
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength.
See More

Cardone New – New Vacuum Pump (Part No.90-1023)

New Vacuum Pump

from

$181.99
CARDONE New Vacuum Pumps are backed by CARDONE Engineered Technology, which ensures that all CARDONE Select New Vacuum Pumps meet or exceed O.E. form, fit and function. CARDONE Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and corrected, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are 100% tested to ensure reliable, long-lasting performance.

Product Features:
  • Units are tested 100% to ensure they are leak-free and meet vacuum performance standards.
  • Engineered to meet or exceed O.E.M.performance.
  • Designed for easy installation.
  • Guaranteed fit and function.
See More

GM Genuine Parts – Air Injection Valve (Part No.214-1045)

Air Injection Valve

from

$177.99
GM Genuine Parts Secondary Air Injection Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves help prevent exhaust gases from flowing back through the air injection system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent exhaust from entering air pump
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Fuel Tank Sending Unit FG12UCQ: Includes Wiring Harness (Part No.FG12UCQ)

Fuel Tank Sending Unit FG12UCQ: Includes Wiring Harness

from

$201.99
Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • All sending units are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582931)

Fuel Tank Lock Ring

from

$16.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:
  • Engineered to meet or exceed all OEM specifications.
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4396)

Engine Coolant Temperature Sensor

from

$34.99
An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is a high quality replacement for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Dorman – Steel Fuel Tank (Part No.576-314)

Steel Fuel Tank

from

$149.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:
  • Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models.
  • Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service.
  • Quality assured – this part has been validated to ensure a quality fit and long service life
  • Trustworthy design – backed by team of product specialists in the United States
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60759)

Fuel Injection Throttle Body Mounting Gasket

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Fuel Tank Selector Valve Connector (Part No.FSA1013)

Fuel Tank Selector Valve Connector

from

$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Fuel Pump Push Rod

from

$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:
  • Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
  • Ideal solution – this rod is a reliable replacement for an original part that has failed
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Remanufactured Diesel Fuel Injection Pump (Part No.AM91073)

Remanufactured Diesel Fuel Injection Pump

from

$638.99
CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes pump mounting o-ring
See More

Delphi – Fuel Injection Pump Installation Kit (Part No.7135-263)

Fuel Injection Pump Installation Kit

from

$21.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Part is validated, tested and matched to the vehicle application
  • Delphi engineered to meet customer expectations
  • Delphi provides O-rings and other components to assist in completing the job
  • Manufactured to meet or exceed OE requirements
See More

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit

from

$32.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Spectra Premium – Fuel Tank Strap (Part No.ST119)

Fuel Tank Strap

from

$53.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
  • Direct fit ensures safe, secure fuel tank installation
  • Product individually packaged and labeled to help reduce product damage prior to installation
  • Industry leading coverage on straps for plastic tanks
See More

Cardone – Fuel Injector Installation Kit (Part No.2K-102)

Fuel Injector Installation Kit

from

$102.99
CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:
  • All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
  • Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Spectra Premium – Fuel Pump (Part No.SP1114)

Fuel Pump

from

$37.99
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
  • High-performance pump section assembly provides superior performance
  • Leading-edge inlet design to increase performance and efficiency, leading to longer life
  • High grade outer shell for life-long corrosion resistance
  • Optimized, precision-wound armature assembly for increased performance
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Ported Vacuum Switch (Part No.ECA1725)

Ported Vacuum Switch

from

$42.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 1986 GMC P2500 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1986 GMC P2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your P2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Fuel and Emissions Systems for the 1986 GMC P2500, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1986 GMC P2500 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.29 to $952.99, with an average price of $56.96. Our 79 Fuel and Emissions Systems in stock come from 16 trusted brands, so you’re sure to find the right part for your 1986 GMC P2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1986 GMC P2500, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch Carquest Premium, and more. Bosch Fuel and Emissions Systems start at just $31.99 and boast an impressive 5 stars average rating from customers. With 1,444 customer reviews and counting, our 1986 GMC P2500 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1986 GMC P2500 is always ready to roll. We’re committed to providing you with everything you need to keep your P2500 in top shape, all in one place. Start shopping confidently below for your 1986 GMC P2500!

Best-Selling Oxygen Sensors for 1986 GMC P2500s

Enhance the driving experience in your GMC with 3 quality Oxygen Sensor components, starting at $29.99.

Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit

from

$31.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit

from

$32.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

NTK – Switching Oxygen Sensor: 1 Wire, 15.25" Long, Non-Heated, Direct Fit (Part No.21002)

Switching Oxygen Sensor: 1 Wire, 15.25" Long, Non-Heated, Direct Fit

from

$29.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Most Popular 1986 GMC P2500 Gas Caps

Customize your GMC with 20 Gas Caps products like Gas Caps, all priced under $31.99.

Carquest Premium – Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Keyed Alike Locking Fuel Cap

from

$11.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Keyed Alike Locking Fuel Cap

from

$16.79
None

Product Features:
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack

from

$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Gas Cap: Twist On, Reduces Air Pollution, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$16.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
  • “Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.
See More

Carquest Premium – Locking Fuel Cap (Part No.10591)

Locking Fuel Cap

from

$23.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Keyed Alike Locking Fuel Cap

from

$6.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Locking Fuel Cap (Part No.10501D)

Locking Fuel Cap

from

$31.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack

from

$23.99
Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Keyed Alike Locking Fuel Cap

from

$10.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Motorad – Tethered Fuel Cap (Part No.MGC517T)

Tethered Fuel Cap

from

$20.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Top Picks for 1986 GMC P2500 Fuel Pumps

Upgrade GMC P2500s with top-quality Fuel Pumps parts, including 18 OEM and aftermarket selections for your 1986 model.

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Fuel Pump Push Rod

from

$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:
  • Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
  • Ideal solution – this rod is a reliable replacement for an original part that has failed
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Mechanical Fuel Pump 160577: Includes Gasket (Part No.160577)

Mechanical Fuel Pump 160577: Includes Gasket

from

$25.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)

Performer RPM Series fuel pump for SBC and W Series Chevy

from

$168.99


Product Features:
  • Unique Valve Design
  • Improves Flow Quantity/Quality
  • Supports Engines Up To 550 HP
  • Hi-Vol 0.375 in. NPT Inlet/Outlet
  • Produces 6 psi
  • Gasoline Or Mixed Fuels Only
See More

Carquest Premium – Mechanical Fuel Pump 160574: Includes Gasket (Part No.160574)

Mechanical Fuel Pump 160574: Includes Gasket

from

$23.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Fuel Pump (Part No.E260312)

Fuel Pump

from

$64.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Mechanical Fuel Pump 1496422: Includes Gasket (Part No.1496422)

Mechanical Fuel Pump 1496422: Includes Gasket

from

$27.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

ACDelco – Engine Oil Pressure Sensor (Part No.D1829)

Engine Oil Pressure Sensor

from

$41.99
ACDelco Professional Engine Oil Pressure Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: engine – mechanical. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Mechanical Fuel Pump 1510502: Includes Gasket (Part No.1510502)

Mechanical Fuel Pump 1510502: Includes Gasket

from

$25.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Delphi – Fuel Lift Pump: With Gasket (Part No.HFP906)

Fuel Lift Pump: With Gasket

from

$40.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • All pumps are functionally tested for correct operation which improves pump reliability
  • Exact fit original equipment replacements means easy installation
  • Consistent pressure at all operating temperatures results in quick start-ups.
  • Pump is designed for diesel engines and applications
  • Always check fuel filter when replacing the fuel pump
See More

Cloyes Gear – Fuel Injection Pump Drive Gear (Part No.2823)

Fuel Injection Pump Drive Gear

from

$48.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Helical tooth form for quiet operation and precision machined bore for true fit
  • CAD designed and manufactured using premium materials to ensure optimal performance
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cardone – Fuel Injection Pump (Part No.2H-106)

Fuel Injection Pump

from

$952.99
CARDONE Remanufactured Fuel Injection Pumps are application specific pumps that expand across a variety of platforms. Our diesel injector pumps are precision wound with trimmed solenoid windings to ensure accurate and precise delivery of fuel from the electronic control module (ECU). This allows for smooth engine operation, improved fuel consumption, reduced harmful emissions, instant throttle response, and optimal fuel atomization, providing a quality product both you and your vehicle can rely on.

Product Features:
  • All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
  • Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
  • All components are renewed or replaced as necessary to ensure high quality and durability
  • When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Carquest Premium – Remanufactured Diesel Fuel Injection Pump (Part No.AM91073)

Remanufactured Diesel Fuel Injection Pump

from

$638.99
CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes pump mounting o-ring
See More

Carquest Premium – Fuel Pump E2521135 (Part No.E2521135)

Fuel Pump E2521135

from

$61.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

In-Demand Air Flow Sensors for 1986 GMC P2500s

Select from 1 premium Air Flow Sensors parts for your 1986 GMC P2500.

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4396)

Engine Coolant Temperature Sensor

from

$34.99
An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is a high quality replacement for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Most Sold 1986 GMC P2500 Fuel Injectors

Explore our best-selling GMC parts for the 1986 P2500 among 7 OEM and aftermarket options starting from $2.99.

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11033)

Remanufactured Diesel Fuel Injector

from

$74.99
CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:
  • Premium OE quality materials
  • Includes copper combustion seal
See More

Felpro – Fuel Pump Mounting Gasket (Part No.70150)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Cardone – Fuel Injector (Part No.2J-105)

Fuel Injector

from

$197.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
  • Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
  • All components are renewed or replaced as necessary to ensure high quality and durability
  • When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Cardone – Fuel Injector Installation Kit (Part No.2K-102)

Fuel Injector Installation Kit

from

$102.99
CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:
  • All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
  • Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Carquest Premium – New Diesel Fuel Injector (Part No.AN11033)

New Diesel Fuel Injector

from

$67.99
CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:
  • Premium OE quality materials
  • Includes copper combustion seal
See More

Cardone – Fuel Injection Pump Installation Kit (Part No.2K-101)

Fuel Injection Pump Installation Kit

from

$57.99
CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Product Features:
  • All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
  • Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

ACDelco – Multi-Purpose Gasket (Part No.14025557)

Multi-Purpose Gasket

from

$3.99
GM Genuine Parts Fuel Injector Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1986 GMC P2500

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1986 GMC P2500s. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1986 P2500 start at just $1.29 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 1986 GMC P2500 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1986 GMC P2500, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 1986 GMC P2500. With over 2 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $32.49. Plus, with over 74 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit
from
$32.99

(31)

Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit

“Been installed for a week. CEL is still off.”

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit
from
$31.99

(43)

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit

“Fit correct. Performing properly”

Popular Carquest Premium 1986 GMC P2500 Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1986 GMC P2500 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1986 P2500, Advance Auto Parts carries a full inventory of 44 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your GMC in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $1.29 to $638.99, plus, with more than 424 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Multi Purpose Relay
from
$19.99
This product is not rated

Multi Purpose Relay

“”

Fuel Tank Lock Ring
from
$16.99
This product is not rated

Fuel Tank Lock Ring

“”

Keyed Alike Locking Fuel Cap
from
$10.99
This product is not rated

Keyed Alike Locking Fuel Cap

“”

FAQs for 1986 GMC P2500 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1986 GMC P2500s?

Out of 79 Fuel and Emissions Systems that fit 1986 GMC P2500s, the following parts are the top sellers:

What’s the price range for 1986 GMC P2500 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1986 GMC P2500 start at $1.29 and go up to $952.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1986 GMC P2500?

The average price for Fuel and Emissions Systems for the 1986 GMC P2500 is $56.96. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other GMC P2500 model years?

Yes, we currently carry Fuel and Emissions Systems for 10 model years of GMC P2500s between 1979 and 1989. Fuel and Emissions Systems are bought most frequently for the following model years: 1989, 1988, 1987, 1985, 1984, 1983, 1982, 1981, and 1980.

What are the cheapest Fuel and Emissions Systems for my 1986 GMC P2500?

The cheapest 1986 GMC P2500 Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 1986 GMC P2500?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1986 GMC P2500:

Can I get help with 1986 GMC P2500 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Fuel and Emissions Systems and more.

What is your return policy for GMC P2500 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new GMC P2500 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.