1986 GMC K3500 Automatic Transmission Parts

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

• Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
• Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).

Product Features:

• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
• All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

AT FRT PUMP BUSHING

AT MODULATOR VALVE

The transmission modulator valve is a vacuum operated mechanical device located on the transmission case. This valve will have a actuator rod extended into the transmission valve body inside the transmission which will control the flow of transmission fluid within the transmission to place the transmission in the most optimal forward gear selection.

Product Features:

• Application matched component ensures the transmission gear position system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• This part will look and function just like the original unit being replaced.

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Detent cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes brackets, grommets, etc to match original
• Helps transmission determine ideal downshift
• Improves vehicle performance

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Detent cables are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

• Includes brackets, grommets, etc to match original
• Helps transmission determine ideal downshift
• Improves vehicle performance

AUTO TRANS BAND

AUTO TRANS BAND

AT OIL PUMP ORING

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Precision-wound coated copper windings increase product durability and life cycle.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

• Meets or exceeds OE specifications

This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
• Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

AT CLUTCH PLATE

AT CLUTCH PLATE

ATP Automatic Transmission Control Solenoid (Lock-Up)

AT/HARNESS VSS REPR

ATHARNESS VSS REPR

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

• Shifter Service Parts
• Steel
• Natural Finish
• Sold individually
• Replacement for Bandit shifters

AT SOLENOID SEAL