1986 Chrysler Town & Country Performance and Racing Products
More 1986 Chrysler Town & Country Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1986 Chrysler Town & Country, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1986 Chrysler Town & Country Performance and Racing Products
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)
from
$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
Accel – Custom Fit Super Stock Spark Plug Wire Set, 8mm Super Stock Graphite Core (Part No.4072)
from
$58.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with blue, black, red and yellow wire, zinc-plated steel terminals. Tinned copper core.
Product Features:
See More
Product Features:
- Graphite Suppression Eliminates RFI/EMI
- 3000 To 7000 Ohms Per Foot Of Resistance
- Silicone Spark Plug Boots
- 450 Degree Temperature Rating
MSD Ignition – Wire Set; Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32739)
from
$163.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – Custom Fit Super Stock Spark Plug Wire Set, 8mm Super Stock Graphite Core (Part No.4045)
from
$52.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with blue, black, red and yellow wire, zinc-plated steel terminals. Tinned copper core.
Product Features:
See More
Product Features:
- Graphite Suppression Eliminates RFI/EMI
- 3000 To 7000 Ohms Per Foot Of Resistance
- Silicone Spark Plug Boots
- 450 Degree Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
Accel – Custom Fit Super Stock Spark Plug Wire Set, 7mm Super Stock Graphite Core (Part No.4057)
from
$58.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with blue, black, red and yellow wire, zinc-plated steel terminals. Tinned copper core.
Product Features:
See More
Product Features:
- Graphite Suppression Eliminates RFI/EMI
- 3000 To 7000 Ohms Per Foot Of Resistance
- Silicone Spark Plug Boots
- 450 Degree Temperature Rating
Accel – Custom Fit 300+ Race; Spark Plug Wire Set (Part No.7045)
from
$149.99
These ACCEL wire sets are custom tailored for race engines and their builders. The oversize 8.8 mm wire is rated for 600 degrees Fahrenheit and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing. Route over and under headers.
Product Features:
See More
Product Features:
- 300+Race- 8.8mm Black
- For Race Engine Configurations
- Stainless Steel Spark Plug Terminals
- Suppression of EMI/RFI
- 600 Degree Double Silicone Construction
- Spiral Wound Copper/Nickel Alloy
- Fully Reactive Ferrite Material
- 150 Ohms Resistance
Mr. Gasket – Radiator Cap (Part No.2481)
from
$16.99
Cap off your radiator with a gleaming chrome plated filler cap. Made to last.
Product Features:
See More
Product Features:
- Chrome radiator caps
- Made to last
- Skin packaged
Mr. Gasket – Thermocap Radiator Cap (Part No.2470S)
from
$54.99
Knowing your coolant temperature can help to prevent burn injuries. Thermo Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermo Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Check the Thermo Cap temperature indicator to determine if the coolant is cool enough to make removing Thermo Cap safe. If the coolant is very hot, then thoroughly rinse the radiator with cool water, until the coolant temperature drops into a cooler safe zone Thermo Cap’s integrated coolant reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree Fahrenheit temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges. Chromed crown with a colored trim ring. Indicates coolant temperature, Helps to prevent coolant injuries, integrated coolant reclamation valve, Improves under hood appearance, Fits most domestic or import vehicles and various valve pressures available.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps to prevent coolant injuries
- Integrated coolant reclamation valve
- Improves under hood appearance
- Fits most domestic vehicles
- Built in calibrated thermometer
MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)
from
$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – Super Coil Ignition Coil (Part No.140001)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Super Coil (Part No.140021)
from
$67.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Uf-198
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Popular 1986 Chrysler Town & Country Performance and Racing Products Categories
1986 Chrysler Town & Country Performance and Racing Products
You count on your 1986 Chrysler Town & Country to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 4 Performance and Racing Products ranging in price from $54.99 to $97.99, you’re sure to find everything you need for your 1986 Chrysler Town & Country.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 3 different brands like Mr. Gasket, Accel, and MSD Ignition. 1986 Chrysler Town & Country Performance and Racing Products start as low as $54.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 22 extensive product reviews on 1986 Chrysler Town & Country Performance and Racing Products.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1986 Chrysler Town & Country below to get started!
Top-Rated Performance and Racing Products Brands For Your 1986 Chrysler Town & Country
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Chrysler Town & Country running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Accel, MSD Ignition, and even more.
Popular MSD Ignition Performance and Racing Products
You’ll find popular MSD Ignition brand products across Performance Ignition Products. All are waiting to get your 1986 Chrysler Town & Country back on the road. Some of the top-rated MSD Ignition products in these categories are:
FAQs for 1986 Chrysler Town & Country Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1986 Chrysler Town & Country?
Out of 4 Performance and Racing Products for the 1986 Chrysler Town & Country, the most popular in our inventory are:
from
$58.99
(1)
Custom Fit Super Stock Spark Plug Wire Set, 7mm Super Stock Graphite Core
Performance Spark Plug Wires
