1986 Chevrolet C10 Clutch Systems
Find Your Specific 1986 Chevrolet C10 Clutch Systems
Below you will find various in-demand Chevrolet Clutch Systems, components and accessories for your 1986 C10. Advance Auto Parts has popular C10 parts like Flywheels, Clutch Kits, Clutch Slave Cylinders and more. You’ll also find aftermarket and OEM Clutch Systems for other C10 model years including
1977,
1978,
1979,
1980,
1981,
1982,
1983,
1984,
1985 and more. Select a category of 1986 Chevrolet C10 Clutch Systems below and start saving instantly.
Popular 1986 Chevrolet C10 Clutch Systems Categories
Essential Clutch Systems for 1986 Chevrolet C10s
Driveworks – Clutch Release Bearing (Part No.S-1697-C)
National – Bearings (Part No.57080)
from
$31.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Hays – Hays450 Cltch 55-85 GM:10.5In:10Spl (Part No.91-1002)
from
$413.99
Hays450 Cltch 55-85 GM:10.5In:10Spl
ATP – CLUTCH FORK (Part No.JX-104)
from
$8.99
CLUTCH FORK
Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA38559)
from
$48.49
Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Integral brackets included for ease of installation (where applicable)
- Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
- All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
- Brand may vary by location
ATP – ATP Flywheel Shim (Part No.GS-8)
from
$27.99
ATP Flywheel Shim
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-135)
from
$66.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – ATP Manual Transmission Flywheel (Part No.Z-297)
from
$141.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)
from
$18.99
M/T FLYWHEEL BOLT
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (Part No.130-2201)
from
$20.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- Sold As A Kit
- 180,000 PSI
LuK – Clutch Slave Cylinder (Part No.LSC117)
from
$37.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Sachs – Clutch Release Bearing (Part No.I2020426255SAC)
from
$53.68
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Extended service life
- Compact, lightweight design
- Sealed for life with high performance, application-specific grease
- Simplified assembly
- Integrated functionality
- Design flexibility
Richmond Gear – Differential Cross Shaft (Part No.80-0272-1)
from
$66.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Richmond Gear – Differential Cross Shaft (Part No.80-0269-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Lakewood – Trans Adapter-Chevrolet (Part No.77-150)
from
$689.99
Trans Adapter-Chevrolet
ATP – AT CLUTCH PLATE (Part No.SC-29)
from
$13.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.SC-30)
from
$6.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.JC-57)
from
$12.99
AT CLUTCH PLATE
LuK – Clutch Master Cylinder (Part No.LMC128)
from
$43.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LUK – Clutch Master Cylinder (Part No.I3000835916LUK)
from
$67.84
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
ATP – CLUTCH FORK (Part No.ZA-108)
from
$33.99
CLUTCH FORK
LuK – Clutch Release Fork (Part No.LF9808)
ATP – CLUTCH FORK (Part No.ZA-104)
from
$52.99
CLUTCH FORK
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Flywheel Ring Gear (Part No.ZA-512)
from
$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
Upgrade your 1986 Chevrolet C10 with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 1986 Chevrolet C10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Clutch Systems are key to keeping your C10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Clutch Systems for the 1986 Chevrolet C10, designed to meet your needs without breaking the bank.
From
Flywheel
replacements to
Clutch Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 1986 Chevrolet C10 at great prices.
Our Clutch Systems inventory for this model
ranges from just $3.99 to $689.99, with
an average price of $91.51.
Our 57 Clutch Systems in stock come from 13 trusted brands, so you’re sure to find the right part for your 1986 Chevrolet C10 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1986 Chevrolet C10, we stock popular OEM and aftermarket Clutch Systems from top names
like ATP Dorman, and more.
ATP Clutch Systems
start at just $6.99 and boast an impressive 4 stars average rating from customers.
With 143 customer reviews and counting, our 1986 Chevrolet C10 Clutch Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1986 Chevrolet C10 is always ready to roll. We’re committed to providing you with everything you need to keep your C10 in top shape, all in one place.
Start shopping confidently below for your 1986 Chevrolet C10!
Best-Selling Flywheels for 1986 Chevrolet C10s
Enhance the driving experience in your Chevrolet with 27 quality Flywheel components, starting at $3.99.
ATP – Automatic Transmission Flex Plate (Part No.Z-166)
from
$47.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)
from
$11.29
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-135)
from
$66.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
LuK – Clutch Flywheel (Part No.LFW103)
from
$96.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
LuK – Clutch Flywheel (Part No.LFW101)
from
$97.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)
from
$18.99
M/T FLYWHEEL BOLT
ATP – AT HD FLEX PLATE (Part No.Z-463)
from
$121.99
AT HD FLEX PLATE
Hays – Power Train (Part No.10-025)
from
$148.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
Dorman – Flywheel Bolt (Part No.I1005831588DOR)
from
$16.66
Flywheel Bolt
Sachs – Sachs Flywheel (Part No.I1000323295SAC)
from
$227.56
Sachs Flywheels are made from high quality steel forging and are designed to meet or exceed the manufacturers specifications for quality and performance.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
LuK – OE Quality Flywheel (Part No.LFW201)
from
$194.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)
from
$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
ATP – FLYWHEEL SHIM (Part No.GS-10)
from
$26.99
FLYWHEEL SHIM
ATP – ATP Flywheel Shim (Part No.GS-8)
from
$27.99
ATP Flywheel Shim
ATP – FLYWHEEL SHIM (Part No.GS-4)
from
$26.99
FLYWHEEL SHIM
LUK – Flywheel (Part No.I1000835711LUK)
from
$165.58
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
ATP – ATP Manual Transmission Flywheel (Part No.Z-297)
from
$141.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
Lakewood – Power Train (Part No.RM-931)
from
$117.99
Power Train
Hays – Power Train (Part No.10-530)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Lakewood – Power Train (Part No.RM-930)
from
$207.99
Power Train
LUK – Flywheel (Part No.I1000835709LUK)
from
$185.23
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
Lakewood – Power Train (Part No.RM-925)
from
$172.99
Power Train
ATP – Flywheel Ring Gear (Part No.ZA-512)
from
$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.200-2802)
from
$24.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.
Product Features:
See More
Product Features:
- 3/4″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 7/16″-20 RH Thread Size
- Set of 6
- Chevy 90° V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
- 1″ Underhead Length
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
Most Popular 1986 Chevrolet C10 Clutch Kits
Customize your Chevrolet with 7 Clutch Kits products
like Clutch Sets, all
priced under $382.99.
LuK – Clutch Kit (Part No.04-064)
from
$139.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
See More
LuK – Clutch Kit: 11 7/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-902)
from
$164.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit (Part No.04-089)
from
$160.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
See More
LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.04-128)
from
$153.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Hays – Hays450 Cltch 60-89 GM P/U V8:12In:10Sp (Part No.91-1006)
from
$382.99
Hays450 Cltch 60-89 GM P/U V8:12In:10Sp
LuK – Clutch Kit: 11 3/4" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-105)
from
$221.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Sachs – Super Set Clutch Kit (Part No.I2030243755SAC)
from
$265.96
As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.
Product Features:
See More
Product Features:
- OE Quality and direct fit application.
- Original Equipment Supplier
- Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
- Most complete clutch kit line offering in the industry
- Unmatched Asian, Domestic and European coverage
- Exclusive parts not available through other suppliers
- Complete range of complimentary parts and upgrades
Top Picks for 1986 Chevrolet C10 Clutch Slave Cylinders
Upgrade Chevrolet C10s with top-quality Clutch Slave Cylinders parts, including 1 OEM and aftermarket selections for your 1986 model.
LuK – Clutch Slave Cylinder (Part No.LSC117)
from
$37.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
In-Demand Clutch Release Bearings for 1986 Chevrolet C10s
Select from 4 premium Clutch Release Bearings parts for your 1986 Chevrolet C10, with prices ranging from $14.79 to $90.99.
National – Multi Purpose Bearing (Part No.614083)
from
$56.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Hays – Power Train (Part No.70-101)
from
$90.99
Power Train
Sachs – Clutch Release Bearing (Part No.I2020426255SAC)
from
$53.68
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Extended service life
- Compact, lightweight design
- Sealed for life with high performance, application-specific grease
- Simplified assembly
- Integrated functionality
- Design flexibility
Driveworks – Clutch Release Bearing (Part No.S-614018)
Most Sold 1986 Chevrolet C10 Clutch Master Cylinders
Explore our best-selling Chevrolet parts for the 1986 C10 among 2 OEM and aftermarket options starting from $43.99.
LuK – Clutch Master Cylinder (Part No.LMC128)
from
$43.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LUK – Clutch Master Cylinder (Part No.I3000835916LUK)
from
$67.84
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Top-Rated Clutch Systems Brands For Your 1986 Chevrolet C10
Shop for the best-rated brands offering Clutch Systems and other products for your 1986 Chevrolet C10s. Below you’ll find some of our best rated Clutch Systems from ATP and Dorman, and more. Clutch Systems from these brands that fit a 1986 C10 start at just $3.99 and are rated as high as 4 stars. OEM and aftermarket Clutch Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular ATP 1986 Chevrolet C10 Clutch Systems
When it comes to maintaining or upgrading your 1986 Chevrolet C10, using quality Clutch Systems is essential to ensure durability and a perfect fit. ATP ticks all of those boxes. We offer a wide selection of ATP Clutch Systems, specifically designed for the 1986 Chevrolet C10. With over 16 ATP brand Clutch Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $39.43. Plus, with over 24 customer reviews and an average rating of 4 stars, you can trust that our ATP Clutch Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Dorman 1986 Chevrolet C10 Clutch Systems
Dorman auto parts is one of the highest quality Clutch System brands in the market. Any 1986 Chevrolet C10 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1986 C10, Advance Auto Parts carries a full inventory of 6 Dorman Clutch Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Clutch Systems range from $3.99 to $28.99, plus, with more than 7 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Clutch Systems below will deliver on both quality and value.
from
$3.99
$3.99
This product is not rated
Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each)
“”
FAQs for 1986 Chevrolet C10 Clutch Systems
Which Clutch Systems are best-sellers for 1986 Chevrolet C10s?
Out of 57 Clutch Systems that fit 1986 Chevrolet C10s, the following parts are the top sellers:
- Clutch Kit (10645771) – $139.99
- Clutch Flywheel (10646800) – $96.99
- Clutch Kit: 11 7/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (10640326) – $164.99
What’s the price range for 1986 Chevrolet C10 Clutch Systems?
Clutch System prices for the 1986 Chevrolet C10 start at $3.99 and go up to $689.99 for the most premium parts.
What’s the average price of a Clutch System for a 1986 Chevrolet C10?
The average price for Clutch Systems for the 1986 Chevrolet C10 is $91.51. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other Chevrolet C10 model years?
What are the cheapest Clutch Systems for my 1986 Chevrolet C10?
The cheapest 1986 Chevrolet C10 Clutch Systems we carry in stock are:
- Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (22142246) – $3.99
- AT CLUTCH PLATE (11239318) – $6.99
- CLUTCH FORK (11239324) – $8.99
- CLUTCH FORK (11239226) – $9.99
- Flywheel Bolts (12029427) – $10.49
What are the top-rated Clutch Systems that fit the 1986 Chevrolet C10?
Out of 143 reviews by customers, our 1986 Chevrolet C10 Clutch Systems have an average customer rating of . These are some of the highest-rated Clutch System types for the 1986 Chevrolet C10 and their top-rated products:
- Clutch Pilot Bearings
- Clutch Pilot Bearing/ Bushing (22148971) – $28.49
- Bearings (18440903) – $31.49
What types of Clutch Systems do you sell for my 1986 Chevrolet C10?
As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 1986 Chevrolet C10:
Can I get help with 1986 Chevrolet C10 Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Clutch Systems and more.
What is your return policy for Chevrolet C10 Clutch Systems?
Advance Auto Parts keeps returns simple. For new Chevrolet C10 Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
