1986 Buick Regal Engine Parts

Below you will find various in-demand Buick Engine Parts, components and accessories for your 1986 Regal. Advance Auto Parts has popular Regal parts like Engine Gaskets and Seals, Engine Timing Parts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other Regal model years including 2003, 2004, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and more. Select a category of 1986 Buick Regal Engine Parts below and start saving instantly.

Popular 1986 Buick Regal Engine Parts Categories

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

OE Engine Oil Coolers

Rear Main Seal Sets

Turbocharger Boost Sensors

Crankshaft Position Sensors

Harmonic Balancers

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Gasket Kit Sets

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Engine Oil Pump Pickup Tube and Screens

Engine Computers

Rubber Freeze Plugs

O-Rings

Valve Cover Load Spreaders

Oil Pump Shafts

Timing Cover Seals

Engine Valve Stem Seals

Piston and Liners

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Oil Pump Kits

Standard Piston Rings

Timing Chains

Engine Oil Galley Plugs

Oil Pump Gear Thrust Plate Kits

Standard Individual Rod Bearings

Camshaft Plugs

Timing Crank Gears

Expansion Plugs

Engine Oil Pump Cover Gaskets

Expansion Plug – Pipes

Fuel Pump Gaskets

Rocker Arm Shafts

Timing Dampers

Engine Cylinder Head Plugs

Engine Valve Locks

Rocker Arm Shaft Plugs

Camshaft Thrust Buttons

Engine Rocker Arm Pivots

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Engine Camshaft Position Sensor O-rings

Essential Engine Parts for 1986 Buick Regals

from

$62.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$70.99

ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$2.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$5.99

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$1.99

This engine oil galley plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine oil galley plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$208.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Chrome plated top ring facings for enhanced performance under demanding conditions
Second rings seat instantly, properly control inter-ring pressure to improve cylinder sealing, provide efficient piston-to-cylinder heat transfer and aid in effective oil control
Oil rings are unequalled at controlling oil; design keeps tension uniform while assuring a positive seal
In the box: compression rings, rails and oil spacer

from

$3.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.49

Made In USA. The Melling gear thrust plate kit provides a new wearing surface for Buick oil pump kits. The Melling kit typically includes a cast iron thrust place, mounting gasket, the correct length screws plus a detailed instruction sheet. A Melling gear thrust plate kit is recommended to assure correct specifications and a new surface for the oil pump gears. Assure the best Buick pump performance with a Melling gear thrust plate kit.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$15.99

Fully Rollerized Operation. Heat-Treated Steel. Needle Roller Bearing. Meet or exceed OEM performance requirements.

Product Features:

Camshaft Thrust Button utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience
Heat-Treated Steel
Needle Roller Bearing
Meet or exceed OEM performance requirements

from

$0.65

from

$81.99

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength – provides conformability required for older applications
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$206.99

Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shaf

Product Features:

25% Higher volume high performance upgrade of the M155HV
CNC machined phosphate coated cast iron housing and cover
Patented billet steel shark tooth helical gears
Includes chrome moly steel intermediate drive shaft with pinned steel guide
Includes lower pressure spring; not installed
Uses 3/4 inch diameter press-fit screen

from

$2.79

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$3.29

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$74.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$10.49

Formulated for prelubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$84.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$16.99

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$2.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$41.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$128.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$45.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$3114.99

ATK High Performance Engines are based on dyno proven combinations built with name brand parts. Most performance engines come in 3 different dress levels and range from 245HP-700HP+ carrying a 2 Year Warranty built by a name you can trust.

from

$122.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool« engine oil cooler kit
Imperial Econo-Kool® engine oil cooler kit
Lightweight construction with high-efficiency turbulators
Light-duty applications
All except Chevrolet V8 applications
Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.

from

$27.49

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Upgrade your 1986 Buick Regal with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1986 Buick Regal, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Engine Parts are key to keeping your Regal functioning at its best. At Advance Auto Parts, we offer a wide selection of 143 Engine Parts for the 1986 Buick Regal, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1986 Buick Regal at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $5,984.99, with an average price of $279.30. Our 143 Engine Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 1986 Buick Regal without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1986 Buick Regal, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Dorman, Spartan, and more. FELPRO Engine Parts start at just $2.79 and boast an impressive 4.6 stars average rating from customers. Dorman and Spartan also bring quality to the table, with Engine Parts available starting at $1.29, and at an average 4.2 stars rating. With 412 customer reviews and counting, our 1986 Buick Regal Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1986 Buick Regal is always ready to roll. We’re committed to providing you with everything you need to keep your Regal in top shape, all in one place. Start shopping confidently below for your 1986 Buick Regal!

Best-Selling Engine Gaskets and Seals for 1986 Buick Regals

Enhance the driving experience in your Buick with 12 quality Engine Gaskets and Seal components, starting at $2.99.

show more show less

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.29

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$17.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$16.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$36.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$13.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$201.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$132.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Most Popular 1986 Buick Regal Engine Timing Parts

Customize your Buick with 15 Engine Timing Parts products like Engine Timing Chain Kits, Timing Sets, and Timing Cover Seals, all priced under $89.99.

show more show less

from

$45.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$33.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S348T Engine Timing Camshaft Sprocket (1 EA), S349 Engine Timing Crankshaft Sprocket (1 EA), C498 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$9.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$11.29

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$6.79

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$89.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$38.99

ENGINE TIMING SET

from

$29.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$29.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$17.99

Street Performance 3/8″ Pitch Double Roller Replacement TRUE Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$10.49

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$7.49

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$7.49

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$4.29

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top Picks for 1986 Buick Regal Engine Mounts

Upgrade Buick Regals with top-quality Engine Mounts parts, including 3 OEM and aftermarket selections for your 1986 model.

show more show less

from

$9.29

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 68-90; CHEV 78-90; GMC 78-84; OLDS 65-90; PONT 75-89;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1965-1990
Weight approx: 2 Lbs
PART GROUP: 2328, 2328
PRODUCT: MADE IN THE USA

from

$15.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 78-87; CADI 80-82; CHEV 78-87; GMC 78-84; OLDS 77-87; PONT 78-87;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1977-1987
Weight approx: 3 Lbs

from

$11.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 75-87; CADI 80-82; CHEV 78-87; GMC 78-84; OLDS 75-87; PONT 76-87;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1975-1987
Weight approx: 3 Lbs

In-Demand Valve Cover and Cylinder Heads for 1986 Buick Regals

Select from 20 premium Valve Cover and Cylinder Heads parts for your 1986 Buick Regal, with prices ranging from $0.43 to $479.99.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$21.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$8.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.49

from

$2.49

from

$2.99

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$25.49

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$2.79

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$145.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$368.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$327.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$319.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$34.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

Roller Lifter Link Bar for Chevrolet V6 and Buick V6

from

$13.99

Roller Lifter Link Bar for Chevrolet V6 and Buick V6

Roller Lifter Link Bar for Chevrolet Small Block, Chevrolet V6 and Buick V6

from

$13.99

Roller Lifter Link Bar for Chevrolet Small Block, Chevrolet V6 and Buick V6

from

$11.79

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$5.29

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$1.79

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 1986 Buick Regal Camshafts

Explore our best-selling Buick parts for the 1986 Regal among 8 OEM and aftermarket options starting from $2.79.

show more show less

from

$2.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Fully Rollerized Operation. Heat-Treated Steel. Needle Roller Bearing. Meet or exceed OEM performance requirements.

Product Features:

Camshaft Thrust Button utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience
Heat-Treated Steel
Needle Roller Bearing
Meet or exceed OEM performance requirements

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

Top-Rated Engine Parts Brands For Your 1986 Buick Regal

Shop for the best-rated brands offering Engine Parts and other products for your 1986 Buick Regals. Below you’ll find some of our best rated Engine Parts from FELPRO, Dorman, and Spartan, and more. Engine Parts from these brands that fit a 1986 Regal start at just $1.29 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1986 Buick Regal Engine Parts

When it comes to maintaining or upgrading your 1986 Buick Regal, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1986 Buick Regal. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.79, with an average price of just $9.92. Plus, with over 32 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $3.99

(26)

Fuel Pump Mounting Gasket

“Needed for pump that was bought”

from $22.99

(3)

Engine Valve Cover Gasket Set

“Thanks works. Great”

from $2.79

(3)

Multi-Purpose O-Ring

“just a perfect replacement for a great price”

Popular Dorman 1986 Buick Regal Engine Parts

Dorman auto parts is one of the highest quality Engine Part brands in the market. Any 1986 Buick Regal owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1986 Regal, Advance Auto Parts carries a full inventory of 3 Dorman Engine Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these Dorman Engine Parts range from $1.29 to $7.49, plus, with more than 6 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $3.99

(1)

Steel Cup Expansion Plug 1-9/16 In., Height 0.380

“great replacement plug”

from $1.29

(3)

Steel Cup Expansion Plug 1-1/2 In., Height 0.220

“worked out great. no problems”

from $7.49

(2)

Rubber Expansion Plug 1 In. – Size Range 1 In. – 1-1/8 In.

“Needed plug for transmission. Seems to be working.”

FAQs for 1986 Buick Regal Engine Parts

Which Engine Parts are best-sellers for 1986 Buick Regals?

Out of 143 Engine Parts that fit 1986 Buick Regals, the following parts are the top sellers:

Fuel Pump Mounting Gasket (5183804) – $3.99
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (5701295) – $9.49
Engine Valve Lifter (3690024) – $21.99

What’s the price range for 1986 Buick Regal Engine Parts?

Engine Part prices for the 1986 Buick Regal start at $0.43 and go up to $5,984.99 for the most premium parts.

What’s the average price of a Engine Part for a 1986 Buick Regal?

The average price for Engine Parts for the 1986 Buick Regal is $279.30. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Buick Regal model years?

Yes, we currently carry Engine Parts for 37 model years of Buick Regals between 1973 and 2017. Engine Parts are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2004, and 2003.

What are the cheapest Engine Parts for my 1986 Buick Regal?

The cheapest 1986 Buick Regal Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Steel Cup Expansion Plug 29/32 In., Height 0.310 (sold by each) (22146595) – $0.99
Steel Cup Expansion Plug 1-1/2 In., Height 0.220 (3492249) – $1.29
Steel Cup Expansion Plug 1-7/32 In., Height 0.500 (sold by each) (22140593) – $1.29
Steel Cup Expansion Plug 1-1/8 In., Height 0.505 (sold by each) (16140180) – $1.79

What are the top-rated Engine Parts that fit the 1986 Buick Regal?

Out of 412 reviews by customers, our 1986 Buick Regal Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1986 Buick Regal and their top-rated products:

Valve Cover and Cylinder Heads
- Engine Rocker Arm Pivot (5686946) – $2.99
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Gaskets and Seals
- Engine Rocker Arm Pivot (5686946) – $2.99
- Engine Valve Spring Retainer Keeper (19694179) – $0.43

What types of Engine Parts do you sell for my 1986 Buick Regal?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1986 Buick Regal:

Can I get help with 1986 Buick Regal Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Engine Parts and more.

What is your return policy for Buick Regal Engine Parts?

Advance Auto Parts keeps returns simple. For new Buick Regal Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1986 Buick Regal Engine Parts

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1535)

GM Genuine Parts – Engine Crankshaft Position Sensor (Part No.12674702)

Cloyes Gear – Engine Timing Chain (Part No.C365)

Sealed Power – Engine Rocker Arm Bridge (Part No.MR-1840)

Sealed Power – Engine Connecting Rod Bearing (Part No.2555CP 30)

Dorman – Steel Cup Expansion Plug 5/8 In., SC, Height 0.232 (sold by each) (Part No.555-011)

Sealed Power – Piston Ring Set (Part No.E-1024KC .25MM)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (Part No.362633.1)

Melling – Oil Pump Thrust Plate Kit (Part No.P-20I)

Cloyes Gear – Engine Camshaft Thrust Button (Part No.9-5193)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.4281M 30)

Melling Select Performance – High Performance High Volume Cast Iron Oil Pump (Part No.10551ST)

Dorman – Steel Cup Expansion Plug 1-1/2 In., Height 0.480 (sold by each) (Part No.555-028)

Felpro – Fuel Pump Mounting Gasket (Part No.5182)

Felpro – Engine Oil Pump Gasket (Part No.70032)

Cloyes Performance – Engine Timing Set (Part No.9-1132)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8510 PT)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Sealed Power – Engine Rocker Arm Pivot (Part No.MR-1903)

Melling – Stock Replacement Oil Pump Screen (Part No.256S)

Felpro – VALVE COVER GASKET SET (Part No.VS 12869)

Dorman – Harmonic Balancer Assembly (Part No.594-005)

National – Shaft Repair Sleeve (Part No.99174)

Spartan – Engine Long Block; Chev 350 4 BLT 325HP Base (Part No.HP291P)

Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)

Victor Reinz – Engine Crankshaft Seal (Part No.81-38229-00)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13403 C)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50259 R)

Felpro – Engine Oil Pump Gasket (Part No.70032)

Felpro – VALVE COVER GASKET SET (Part No.VS 50156 C)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40613)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50156 T)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72623)

Felpro – Engine Gasket Set (Part No.260-1238)

Felpro – Engine Gasket Set (Part No.260-1477)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

National – Shaft Repair Sleeve (Part No.99174)

Cloyes Gear – Engine Timing Set (Part No.C-3006K)

Felpro – Engine Timing Cover Seal (Part No.15200)

Cloyes Gear – Engine Timing Chain (Part No.C359)

Cloyes Gear – Engine Timing Damper (Part No.9-5045)

Cloyes Gear – Engine Timing Damper (Part No.9-5158)

Cloyes Performance – Engine Timing Set (Part No.9-1134)

INA US – ENGINE TIMING SET (Part No.ZC-C-3018K)

Dayco – TIMING CHAIN KIT (Part No.KTC1393)

Cloyes Gear – Engine Timing Chain (Part No.C498)

Cloyes Performance – High Performance Timing Chain (Part No.9-143)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S348T)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S610T)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S349)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S323)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2328)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2382)

Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2384)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Sealed Power – Engine Rocker Arm Pivot (Part No.MR-1903)

Sealed Power – Engine Valve Lifter (Part No.HT-2104)

Sealed Power – Engine Valve Lifter (Part No.HT-969)

Sealed Power – Engine Rocker Arm Bridge (Part No.MR-1840)

Sealed Power – Engine Push Rod (Part No.RP-3164)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-1/8 In., SC, Height 0.470 (Part No.362639.1)

Competition Cams – Set of 16 – 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess (Part No.611-16)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8723 PT-1)

Dorman – Steel Cup Expansion Plug 1-1/2 In., Height 0.480 (sold by each) (Part No.555-028)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9441 PT)

Spartan – Engine Cylinder Head; Olds 307 85-90 Cyl Head (Part No.2O15)

Spartan – Engine Cylinder Head; Buick 231/3.8 Cyl Head (Part No.2B21)

Spartan – Engine Cylinder Head; Chev 305 78-87 Cyl Head (Part No.2C95)

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Competition Cams – Roller Lifter Link Bar for Chevrolet V6 and Buick V6 (Part No.814-L)

Competition Cams – Roller Lifter Link Bar for Chevrolet Small Block, Chevrolet V6 and Buick V6 (Part No.818-L)

Sealed Power – Engine Valve Lifter (Part No.HT-2104B)

Sealed Power – Engine Valve Lifter (Part No.HT-969B)

Dorman – Steel Cup Expansion Plug 1-1/8 In., SC, Height 0.470 (Sold by each) (Part No.555-020)

Felpro – Multi-Purpose O-Ring (Part No.35608)