from

$68.99

Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:

High Flow For Increased Performance
Progressive 5 Layer Cotton Gauze Material
Deep Cotton Pleats for Increased Flow
Progressive Bump Seal For Leak-Free Seal

from

$68.99

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:

Outflows Stock Paper Filters For Improved Horsepower and Torque
100% Polyurethane Frame On All Sides For Extra Long Filter Life
Washable And Reusable For Multiple Cleaning Cycles
Progressive Bump Seal Design For A Perfect Fit

from

$6.99

Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration

Product Features:

Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
Optimum pleat count provides a higher filtration function
Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles

from

$27.99

A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.

Product Features:

Removes water from the fuel system
Prevents rust and corrosion in your engine
Keeps fuel contaminant free
Replace annually for peak performance
Meets or exceeds OE specifications

from

$36.99

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
Provides maximum fuel system protection.
Designed to meet or exceed Original Equipment specifications
Protects the injectors from debris that cause damage and clogging.
Provides less restriction preventing the fuel pump from working too hard.
Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

from

$46.49

ACDelco Gold (Professional) Fuel Filters are a high quality alternative to Original Equipment (OE) parts. These fuel filters are located in the fuel line of your vehicle and help prevent fuel contaminants, such as dirt and rust particles, from entering the fuel delivery system to help keep the engine running properly. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Help prevent dirt, rust, and other fuel contaminants from entering the fuel delivery system
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$15.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

from

$4.49

CARQUEST Standard Oil Filters give you the level of quality and application you have come to expect from the CARQUEST name.

Product Features:

94.1% efficiency rating at 20 microns
Meets new car warranty requirements
Precision coil spring relief valve
Nitrile anti-drainback valve for engine start-up protection
Metal end caps
Cellulose/synthetic blended media
Internally lubricated gasket

from

$6.49

Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:

Protection for up to 5,000 miles
Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
Nitrile anti-drain back valve for engine start-up protection
Lathe cut nitrile sealing gasket prevents leaks
Double fluted spiral wound center tube allows maximum flow and provides additional strength
Solid steel baseplate provides additional strength to resist leakage
Meets requirements for maintaining new vehicle warranties

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$95.99

For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:

Remote mount filter kit
For use when relocation of the oil filter is necessary
Comes with all necessary hardware except hoses

from

$5.49

AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:

Easy Install – Finger-grip wing for ease of installation
All plugs have 14mm hex – just one wrench works for all
Hi-Temp Gasket – Red hi-temp gasket for max sealing protection

from

$2.98

Oil Drain Plug

from

$4.79

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.89

Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.

from

$6.14

Breather Hose Grommet

from

$6.49

This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features: