1985 Toyota Camry Ignition and Tune-Up Products

Below you will find various in-demand Toyota Ignition and Tune-Up Products, components and accessories for your 1985 Camry. Advance Auto Parts has popular Camry parts like Distributors, Spark Plugs, Ignition Coils and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Camry model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1985 Toyota Camry Ignition and Tune-Up Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1985 Toyota Camry Ignition and Tune-Up Products Categories

Spark Plugs

Ignition Coils

Distributor Cap Kits

Ignition Module and Controls

Distributor Rotor Buttons

Spark Plug Non-Foulers

Armature and Reluctors

Essential Ignition and Tune-Up Products for 1985 Toyota Camries

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$96.21

Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.

Product Features:

OE-Equivalent and a direct fit application
Superior, reliable performance compared to competitive products
Lower cost alternative to original equipment
No additional time consuming steps needed for installation
Factory original equipment connectors
Improved coil efficiency reduces the need to generate excessive high voltage
Designed to provide durability and performance
Noise abatement technology to eliminate audible coil noise
Lower primary inductance provides high-speed performance
Maximum available voltage under all operating conditions
TS 16949 Certification

from

$103.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

High temp epoxy resists shock and vibration
Advanced bobbin technology
Installation usually in less than an hour
Direct OEM replacement
OBD II compatible – will not trip a code

from

$73.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty (limited). Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$46.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$268.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Designed & manufactured to meet OE performance, durability, and EMC level requirements
OE quality replacement parts for the right fit, form and function
Delphi OE technology ignition products are validated to match the vehicle’s engine management system
Delphi ignition control modules are designed to control the timing of the spark plugs by activating the ignition coil at precise intervals

from

$334.99

The ignition control module controls the primary side of the ignition coil and in some applications is able to control ignition timing. The ignition control module receives a signal from a pick-up coil located in the distributor or from the engine control module (ECM) to identify piston location.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$249.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$249.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$11.99

The Iridium Power Spark Plug features the world’s smallest Iridium Center Electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency and enhanced engine performance. Engineered with a patented 360-degree laser welding assembly process, it ensures exceptional durability and reliability under extreme conditions, withstanding temperatures exceeding 4000 Deg F. The U-groove and taper-cut ground electrode design optimizes flame propagation, ensuring consistent ignition and improved fuel efficiency. Its burnished nickel plating provides superior resistance to high temperatures and corrosion, making it ideal for long-lasting performance. Compatible with a wide range of vehicles, including classic and collector cars, this spark plug offers versatility and reliability for thousands of applications. Crafted with an iridium center electrode and a flat seat type, it combines cutting-edge technology with robust construction to deliver maximum spark energy and durability. Choose this spark plug for a high-performance upgrade that stands the test of time.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power

from

$4.99

The Copper Plus Spark Plug delivers dependable performance and durability, making it a reliable choice for maintaining your engine’s efficiency. Featuring a copper core center electrode, it ensures enhanced conductivity and precise heat control, promoting good overall wear and extending the spark plug’s lifespan. Built to ISO and SAE Standards, this spark plug guarantees proven performance and superior corrosion resistance, even in demanding conditions. Its nickel copper alloy tip and flat seat design provide optimal reliability and consistent functionality, making it a standard replacement for a wide range of applications. With a focus on durability and heat management, this spark plug is engineered to keep your engine running smoothly while offering excellent value for long-term use.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
Reliable Nickel Copper Alloy Tip: Featuring a nickel copper alloy center electrode tip and a flat seat type, this spark plug ensures enhanced reliability and optimal performance for your engine.

from

$3.99

Copper Plus Spark Plug RC12YC5 is engineered for dependable performance and durability, making it a reliable choice for maintaining your engine’s efficiency. Featuring a copper core center electrode, it delivers enhanced conductivity and precise heat control, ensuring good overall wear and extending the spark plug’s lifespan. The nickel center electrode tip and flat seat design further contribute to consistent and reliable performance, while superior corrosion resistance ensures long-term durability. Built to ISO and SAE Standards, this spark plug meets rigorous quality benchmarks for proven performance. As a standard replacement grade, it is designed to provide accurate heat range control, making it ideal for maintaining optimal engine functionality. Whether you’re looking for enhanced heat management or reliable ignition, this spark plug offers exceptional value and performance.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The copper core electrode provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and flat seat type, this spark plug ensures consistent and reliable performance, contributing to the overall efficiency of your engine.

from

$4.99

Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, better acceleration, and improved fuel efficiency. The platinum firing tip resists gap erosion, extending service life, while the high alumina ceramic insulator enhances thermal conductivity and insulation for added strength. A multi-rib insulator prevents flash-over, and the nickel-plated shell offers exceptional corrosion resistance for long-lasting durability. Designed with a mid-projection standard center electrode and nickel ground electrode tip, these spark plugs deliver reliable performance under demanding conditions. Engineered in the USA with over a century of expertise and backed by the sale of over 11 billion plugs, Autolite Platinum spark plugs are a trusted choice for drivers seeking enhanced engine efficiency and durability.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Engineered in the USA: Backed by over 100 years of engineering expertise and over 11 billion plugs sold.

from

$19.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$8.79

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$7.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$7.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$12.05

Intermotor is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor is the import leader by design.

Product Features:

High dielectric-strength engineering polymer prevents breakdown or arcing and ensures long life
Solid brass segment resists pitting and erosion for extended life
Utilizes shaft retention clips for proper distributor shaft fit
Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits

from

$31.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order. The distributor reluctor is the pole piece for the distributor pick-up.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$69.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$26.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$31.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$25.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$27.49

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$48.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$44.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$54.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$22.49

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Upgrade your 1985 Toyota Camry with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1985 Toyota Camry, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Camry functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Ignition and Tune-Up Products for the 1985 Toyota Camry, designed to meet your needs without breaking the bank. From Distributor replacements to Spark Plugs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1985 Toyota Camry at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.79 to $179.99, with an average price of $20.55. Our 32 Ignition and Tune-Up Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1985 Toyota Camry without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Toyota Camry, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, Champion, Autolite, and more. NGK Ignition and Tune-Up Products start at just $5.99 and boast an impressive 4.8 stars average rating from customers. Champion and Autolite also bring quality to the table, with Ignition and Tune-Up Products available starting at $3.99, and at an average 4.7 stars rating. With 248 customer reviews and counting, our 1985 Toyota Camry Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Toyota Camry is always ready to roll. We’re committed to providing you with everything you need to keep your Camry in top shape, all in one place. Start shopping confidently below for your 1985 Toyota Camry!

Best-Selling Distributors for 1985 Toyota Camries

Enhance the driving experience in your Toyota with 6 quality Distributor components, starting at $5.05.

show more show less

from

$6.05

Intermotor® is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor® parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor® is the import leader by design.

Product Features:

High dielectric-strength engineering polymer prevents breakdown or arcing and ensures long life
Solid brass segment resists pitting and erosion for extended life
Utilizes shaft retention clips for proper fit of distributor shaft
Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits

from

$21.49

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$5.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$7.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$54.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$31.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Most Popular 1985 Toyota Camry Spark Plugs

Customize your Toyota with 21 Spark Plugs products like Spark Plugs and Spark Plug Non-Foulers, all priced under $16.99.

show more show less

from

$8.49

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

from

$4.99

Autolite Platinum spark plugs are crafted for exceptional performance and durability, making them an ideal choice for older engine designs. Featuring a platinum center electrode firing tip, they ensure quicker firing, smoother starts, and enhanced fuel efficiency. The platinum construction resists gap erosion, extending the service life, while the high alumina ceramic insulator provides superior thermal conductivity and insulation for added strength. A multi-rib insulator design prevents flash-over, ensuring reliable operation, and the nickel-plated shell offers excellent corrosion resistance for long-lasting durability. With a mid-projection standard center electrode and a flat seat type, these performance-grade spark plugs deliver consistent results. The combination of a platinum tip and nickel ground electrode ensures optimal ignition, making these spark plugs a dependable upgrade for improved acceleration and overall engine efficiency.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
The mid-projection center electrode design ensures consistent ignition performance, enhancing engine efficiency and reliability.

from

$5.99

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Triple Gasket Sealing: Prevents combustion gas leakage, ensuring efficient engine performance.

from

$9.99

Champion Double Platinum Power spark plugs are engineered for superior performance and durability, making them an ideal choice for standard replacement needs. Featuring a platinum fine-wire center electrode and a platinum pad ground electrode, these spark plugs deliver exceptional wear resistance and maintain stable operating temperatures under all engine loads. The innovative Heat-Active alloy ensures the electrodes reach optimal temperature quickly, enhancing efficiency and reliability. With a V-trimmed ground electrode design, these spark plugs promote sharper spark focus for improved ignitability and smoother engine operation. Designed with a flat seat type and integrated resistor, they provide consistent performance while reducing electrical interference. Perfect for drivers seeking enhanced ignitability and long-lasting durability, these spark plugs are built to meet the demands of modern engines.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature

from

$16.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

from

$5.99

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
V-Groove Tip Design: The unique V-groove tip design of the center electrode enhances ignitability and overall engine performance.

from

$4.99

The Copper Plus Spark Plug delivers dependable performance and durability, making it a reliable choice for maintaining optimal engine function. Featuring a copper core center electrode, it ensures enhanced conductivity and precise heat control, promoting good overall wear and extending the spark plug’s lifespan. Built to ISO and SAE Standards, this spark plug guarantees proven performance and superior corrosion resistance, even in demanding conditions. Its nickel copper alloy center electrode tip and flat seat design further enhance reliability and engine efficiency. As a standard replacement grade type with a resistor, it is crafted to meet high-quality Standards, ensuring consistent ignition and smooth operation. Whether you’re seeking durability or enhanced engine performance, this spark plug is engineered to provide long-lasting value.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
High-Quality Materials: Featuring a nickel copper alloy center electrode tip and a flat seat type, this spark plug is designed for enhanced reliability and optimal engine performance.

from

$13.99

The Iridium Power Spark Plug features the world’s smallest iridium center electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency. Engineered with patented 360-degree laser welding, it ensures durability and reliability even under extreme conditions, withstanding temperatures over 4000 Deg F. The U-groove and taper-cut ground electrode design enhances flame propagation, optimizing engine performance. Its burnished nickel plating provides superior resistance to high temperatures and corrosion, making it ideal for long-term use. Designed for a wide range of applications, including classic and collector cars, this spark plug offers superior performance with increased horsepower and improved fuel efficiency. Requiring 5,000 volts less to fire compared to conventional plugs, it ensures reliable starts and fewer misfires, even under heavy loads. Constructed with a durable iridium center electrode tip and a flat seat type, the Iridium Power Spark Plug guarantees long-lasting performance, making it a top choice for drivers seeking efficiency, power, and reliability.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power
Superior Performance: Patented technology allows the Iridium Power plug to outperform any other spark plug on the market, delivering more horsepower and better fuel efficiency.
Low Voltage Requirement: Requires 5,000 volts less to fire compared to conventional spark plugs, making it highly efficient and reliable under extreme conditions.
Enhanced Engine Starts: Experience faster and easier engine starts with fewer misfires, even under heavy loads, thanks to the advanced design of the DENSO Iridium Power spark plug.
Durable Iridium Material: Constructed with a durable iridium center electrode tip and a flat seat type, ensuring long-lasting performance and reliability.

from

$6.99

Double Platinum Spark Plug offers enhanced durability and longer service life, making it a top choice for performance-focused engines. Engineered with a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring consistent ignition and reliability. The yttrium-enhanced ground electrode provides superior heat transfer, allowing the spark plug to withstand high temperatures and pressures for extended durability. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for added safety. Designed with a mid-projection standard center electrode and flat seat type, this spark plug is tailored for distributor-less ignition system (DIS) engines. Both the center and ground electrode tips are crafted from platinum, delivering superior performance compared to copper and standard platinum plugs. With a resistor type included, this spark plug is built to meet the demands of modern engines, offering exceptional value and reliability for long-term use.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed specifically for distributor-less ignition system (DIS) engines, ensuring compatibility and optimized performance for modern engine designs.

from

$8.49

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.46 is a 14mm, 0.750 reach plug with a gasket seat. It fits a wide variety of applications from the 60s to early 90s, especially import. E3.46 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
Wide Compatibility: The E3.46 spark plugs are 14mm with a 0.750 reach and a gasket seat, making them suitable for a wide range of applications from the 1960s to early 1990s, especially for import vehicles.
Widely Available: The E3.46 spark plugs are widely stocked in automotive retail stores, ensuring easy availability for consumers.

from

$3.99

Autolite Copper spark plugs are crafted to ensure quick starts and reliable performance, making them a dependable choice for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrode enhance durability for extended use. The high alumina multi-rib ceramic insulator boosts thermal conductivity and insulation, ensuring superior strength under demanding conditions. With a nickel-plated shell, these spark plugs resist corrosion, adding to their longevity. Designed for optimal fuel efficiency, they help improve fuel economy, saving you money over time. The mid-projection standard center electrode and flat seat type further contribute to their consistent performance. Equipped with a resistor, these spark plugs are built to meet regular grade expectations while delivering reliable ignition and smooth operation.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you achieve better fuel economy, saving you money at the pump.

from

$5.99

ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

from

$9.99

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.79

The Platinum TT Spark Plug with a Twin-Tip design is engineered to deliver superior combustion efficiency by enabling faster flame propagation for a more complete burn. Featuring a durable platinum center electrode tip, this spark plug ensures long-lasting performance and reliable ignition under various driving conditions. Its flat seat type provides a secure fit, enhancing overall engine stability and performance. Designed for precision and efficiency, this spark plug not only improves fuel combustion but also contributes to better fuel economy and reduced emissions. Ideal for drivers seeking enhanced engine responsiveness and durability, it offers exceptional value and reliability for your vehicle.

Product Features:

Twin-Tip design promotes faster flame propagation, ensuring a more complete and efficient fuel burn.
Durable platinum center electrode tip enhances longevity and provides consistent ignition performance.
Flat seat type ensures a secure fit, contributing to improved engine stability and overall performance.
Optimized combustion efficiency supports better fuel economy and reduced emissions for eco-conscious driving.
Engineered for enhanced engine responsiveness, delivering reliable performance under various driving conditions.

from

$12.99

The Iridium TT Spark Plug delivers the perfect blend of durability and high performance, making it an ideal choice for drivers seeking reliability and power. Featuring a 0.4mm Iridium center electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm needle tip ground electrode promotes higher spark energy and minimizes heat quenching. Crafted with DENSO’s patented Iridium-Rhodium alloy formula, this spark plug boasts the highest concentration of Iridium for unmatched durability. Its 360-degree laser welding process ensures a robust bond and structural integrity, even under extreme conditions exceeding 4000 degrees Fahrenheit. Designed with a flat seat type for a secure fit, it offers consistent performance throughout its lifespan. Beyond power and torque, the Iridium TT enhances fuel economy and reduces emissions, allowing you to drive around the Earth over four times with improved efficiency. This spark plug is the ultimate solution for drivers demanding OE-style reliability combined with high-performance endurance.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT
Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
Reliable and Durable: The flat seat type design ensures a secure fit and consistent performance throughout its lifespan.

from

$9.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-enhanced alloy center electrode ensures superior wear resistance for extended performance life.

from

$4.49

Standard Spark Plug (AGS32C) by Motorcraft is the ultimate choice for reliable performance and durability, specifically engineered to meet Ford’s stringent standards. Designed as original equipment for Ford, Lincoln, and Mercury vehicles, these spark plugs ensure an exact fit while delivering enhanced durability, reduced fuel consumption, and optimized emissions. Crafted with high-quality nickel for both the center and ground electrode tips, they resist oxidation and arc erosion, ensuring long-lasting performance. The multi-rib insulator effectively prevents misfires, while the design helps avoid false check engine lights, providing peace of mind for drivers. With service intervals of up to 100,000 miles, these spark plugs offer exceptional value and convenience. Backed by Motorcraft’s Service Parts Warranty, they are ideal for domestic and import cars and trucks of all sizes, making them a versatile solution for almost any application. Trust Motorcraft to deliver the same reliable ignition components your vehicle was manufactured with.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$9.49

ACDelco Professional Double Platinum Spark Plugs are premium aftermarket plugs, and are a high quality replacement for many vehicles on the road today. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Gasket seat type ensures a tight and secure fit, contributing to optimal combustion efficiency and reducing the likelihood of gas leakage.
Resistor design helps minimize electromagnetic interference, ensuring smoother engine operation and improved overall performance.

from

$8.29

The Champion Iridium Spark Plug is engineered for maximum performance and durability, making it a premium choice for your vehicle. Featuring a fine-wire iridium center electrode and a platinum-enhanced ground electrode, this spark plug ensures sharper spark focus and greater ignitability for optimal engine efficiency. The V-trimmed ground electrode design promotes precise spark delivery, while the Heat-Active alloy allows the electrodes to quickly reach and maintain stable operating temperatures under all engine loads. Built with a flat seat type and resistor functionality, it provides reliable performance and reduces electromagnetic interference. Designed for longevity, the iridium center electrode delivers exceptional life, making it ideal for high-performance applications. Upgrade to this performance-grade spark plug and experience smoother starts, improved fuel efficiency, and consistent power output.

Product Features:

Champion Iridium – Maximum Performance. Premium Spark Plug
Iridium center electrode delivers maximum life
Fine-wire center electrode and V-trimmed for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Maintains stable operating temperature under all engine loads
Heat-Active alloy allows electrodes to reach optimal temperature quickly

from

$3.49

Copper Plus spark plug RN11YC4 is engineered for dependable performance and durability, making it an ideal choice for standard replacement needs. Featuring a copper core center electrode, it ensures precise heat range control for extended lifespan and consistent functionality. The nickel-tipped center and ground electrodes enhance conductivity while resisting corrosion, ensuring reliable ignition performance over time. Built to ISO and SAE Standards, this spark plug guarantees proven quality and compatibility with a wide range of vehicles. Its flat seat design and integrated resistor further contribute to optimal performance, making it a trusted solution for maintaining engine efficiency. Choose this spark plug for superior wear resistance and long-lasting reliability.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance

from

$2.79

The U-Groove Spark Plug features a patented U-groove ground electrode design that enhances ignitability, allowing for leaner fuel mixtures and improved engine efficiency. Crafted with precision machine-rolled threads, it minimizes the risk of seizing or cross-threading in delicate aluminum heads, ensuring a secure and hassle-free installation. Built with a nickel center electrode tip and a flat seat type, this spark plug is engineered for durability and consistent performance. It boasts a lifespan twice as long as most conventional plugs, making it a reliable choice for long-term use. Pre-fired to guarantee dependable operation, it is compatible with a wide range of vehicles, including classic and collector cars. Whether you’re maintaining an everyday driver or restoring a vintage gem, this spark plug delivers OE-level performance and exceptional value.

Product Features:

Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100 percent pre-fired to assure reliable operation
U-Groove Conventional

Top Picks for 1985 Toyota Camry Ignition Coils

Upgrade Toyota Camries with top-quality Ignition Coils parts, including 1 OEM and aftermarket selections for your 1985 model.

show more show less

from

$31.99

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

In-Demand Ignition Electronic Parts for 1985 Toyota Camries

Select from 1 premium Ignition Electronic Parts parts for your 1985 Toyota Camry.

show more show less

from

$179.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Most Sold 1985 Toyota Camry Ignition Coils and Boots

Explore our best-selling Toyota parts for the 1985 Camry among 3 OEM and aftermarket options starting from $47.99.

show more show less

from

$78.99

High temp epoxy resists shock and vibration
Advanced bobbin technology
Installation usually in less than an hour
Direct OEM replacement
OBD II compatible – will not trip a code

from

$47.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$55.99

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure

Top-Rated Ignition and Tune-Up Products Brands For Your 1985 Toyota Camry

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1985 Toyota Camries. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, Champion, and Autolite, and more. Ignition and Tune-Up Products from these brands that fit a 1985 Camry start at just $3.99 and are rated as high as 4.8 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 1985 Toyota Camry Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1985 Toyota Camry, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 1985 Toyota Camry. With over 3 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $10.49. Plus, with over 58 customer reviews and an average rating of 4.8 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.99

(13)

Iridium IX Spark Plug (BPR5EIX-11): Enhanced Ignitability & Durability

“Great plug at a great price”

from $5.99

(18)

Standard Nickel Spark Plug (BPR5ES-11): Reliable OE Performance

“got my bike running”

from $8.49

(27)

G-Power Spark Plug (BPR5EGP): Enhanced Durability & Fuel Efficiency

“Worked as advertised”

Popular Champion 1985 Toyota Camry Ignition and Tune-Up Products

Champion auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1985 Toyota Camry owner should feel confident when installing genuine Champion parts in their vehicle. To ensure the best fit and performance for your 1985 Camry, Advance Auto Parts carries a full inventory of 2 Champion Ignition and Tune-Up Products. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Champion Ignition and Tune-Up Products range from $4.99 to $9.99, plus, with more than 9 customer reviews and an impressive 4.7 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $9.99

(8)

Double Platinum Power Spark Plug (RN14PMP5): Enhanced Ignitability & Durability

“Great”

from $4.99

(1)

Copper Plus Spark Plug (RN11YC4): Dependable Performance & Durability

“Fast online transaction and the same free delivery! Got my snow blower works immediately!”

FAQs for 1985 Toyota Camry Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1985 Toyota Camries?

Out of 32 Ignition and Tune-Up Products that fit 1985 Toyota Camries, the following parts are the top sellers:

DiamondFire Spark Plug (E3.46): Enhanced Power & Fuel Efficiency (15650145) – $8.49
Conventional Spark Plug (5391393) – $5.99
Platinum Spark Plug: Improved Performance & Durability (5393876) – $4.99

What’s the price range for 1985 Toyota Camry Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1985 Toyota Camry start at $2.79 and go up to $179.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1985 Toyota Camry?

The average price for Ignition and Tune-Up Products for the 1985 Toyota Camry is $20.55. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Toyota Camry model years?

Yes, we currently carry Ignition and Tune-Up Products for 42 model years of Toyota Camries between 1983 and 2026. Ignition and Tune-Up Products are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Ignition and Tune-Up Products for my 1985 Toyota Camry?

The cheapest 1985 Toyota Camry Ignition and Tune-Up Products we carry in stock are:

U-Groove Spark Plug: OE Performance, W16EXR-U11 (20650370) – $2.79
Copper Plus Spark Plug (RN11YC4): Dependable Performance & Durability (11510761) – $3.49
Copper Resistor Spark Plug: Quick Starts & Reliable Performance (5390214) – $3.99
Standard Spark Plug (AGS32C): Reliable Performance & Durability (89022224) – $4.49
Platinum Spark Plug: Improved Performance & Durability (5393876) – $4.99

What are the top-rated Ignition and Tune-Up Products that fit the 1985 Toyota Camry?

Out of 248 reviews by customers, our 1985 Toyota Camry Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1985 Toyota Camry and their top-rated products:

Spark Plugs
- V-Power Nickel Spark Plug (BPR5EY-11): Enhanced Ignitability & Performance (5392241) – $5.99
- Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IW16 (20650554) – $13.99
- Platinum Spark Plug: Improved Performance & Durability (5393876) – $4.99

What types of Ignition and Tune-Up Products do you sell for my 1985 Toyota Camry?

As of 3/1/26, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1985 Toyota Camry:

Can I get help with 1985 Toyota Camry Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Ignition and Tune-Up Products and more.

What is your return policy for Toyota Camry Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Toyota Camry Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1985 Toyota Camry Ignition and Tune-Up Products

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

World Source One – Direct Ignition Cassette (Part No.F3005409505WSO)

Accel – Coil:Cop Toyota (Part No.140630)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1718)

Carquest Premium – Ignition Coil (Part No.EBC1716)

Delphi – Ignition Control Module (Part No.DS10064)

Carquest Premium – Ignition Control Module (Part No.CBA1662)

Carquest Premium – Ignition Control Module (Part No.CBC1316)

Carquest Premium – New Ignition Modules (Part No.CBE1053)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH16 (Part No.5343)

Champion – Copper Plus Spark Plug (RC10YC4): Dependable Performance & Durability (Part No.346)

Champion – Copper Plus Spark Plug (RC12YC5): Dependable Performance & Durability (Part No.89)

Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP5325)

Carquest Premium – Distributor Rotor (Part No.DAC1206)

Carquest – Distributor Rotor (Part No.23A1014)

Carquest Premium – Distributor Rotor (Part No.DAA1338)

Carquest – Distributor Rotor (Part No.23A1018)

Carquest – Distributor Rotor (Part No.D217)

Carquest Premium – Distributor Reluctor (Part No.REA1027)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1861)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1868)

Carquest Premium – Distributor Cap (Part No.CAE1444)

Carquest Premium – Distributor Cap (Part No.CAC1554)

Carquest Premium – Distributor Cap (Part No.CAE1591)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1959)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1932)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1978)

Carquest Premium – Distributor Cap (Part No.CAC1573)

Carquest – Distributor Rotor (Part No.D600)

Carquest Premium – Distributor Rotor (Part No.DAA1205)

Driveworks – Distributor Rotor (Part No.23105)

Carquest – Distributor Rotor (Part No.23A1018)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1988)

Carquest Premium – Distributor Cap (Part No.CAE1444)

NGK – G-Power Spark Plug (BPR5EGP): Enhanced Durability & Fuel Efficiency (Part No.7082)

Autolite – Platinum Spark Plug: Improved Performance & Durability (Part No.AP64)

NGK – Standard Nickel Spark Plug (BPR5ES-11): Reliable OE Performance (Part No.7634)

Champion – Double Platinum Power Spark Plug (RN14PMP5): Enhanced Ignitability & Durability (Part No.7031)

NGK – Iridium IX Spark Plug (BPR5EIX-11): Enhanced Ignitability & Durability (Part No.2115)

NGK – V-Power Nickel Spark Plug (BPR5EY-11): Enhanced Ignitability & Performance (Part No.6937)

Champion – Copper Plus Spark Plug (RN11YC4): Dependable Performance & Durability (Part No.322)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IW16 (Part No.5305)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Longer Service Life (Part No.APP64)

E3 – DiamondFire Spark Plug (E3.46): Enhanced Power & Fuel Efficiency (Part No.E3.46)

Autolite – Copper Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.64)

ACDelco – Conventional Spark Plug (Part No.R43XLS)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

DENSO – Platinum TT Spark Plug – PW16TT (Part No.4501)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IW16TT (Part No.4708)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP64)

Motorcraft – Standard Spark Plug (AGS32C): Reliable Performance & Durability (Part No.SP-436)

ACDelco – Double Platinum Spark Plug (Part No.41-802)

Champion – Iridium Spark Plug (RN10WYPB5): Maximum Performance & Longevity (Part No.9007)

Champion – Copper Plus Spark Plug (RN11YC4): Dependable Performance & Durability (Part No.322-1)

DENSO – U-Groove Spark Plug: OE Performance, W16EXR-U11 (Part No.3032)

Carquest Premium – Distributor Reluctor (Part No.REA1027)

Carquest Premium – Ignition Control Module (Part No.CBA1258)

Accel – Coil:Cop Toyota (Part No.140314)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1531)

Delphi – Ignition Coil (Part No.GN10215)