1985 Subaru GL-10 Towing Products
Find Your Specific 1985 Subaru GL-10 Towing Products
Below you will find various in-demand Subaru Towing Products, components and accessories for your 1985 GL-10. Advance Auto Parts has popular GL-10 parts like Trailer Wirings Trailer Hitches and more. You’ll also find aftermarket and OEM Towing Products for other GL-10 model years including
1986,
1987,
1988,
1989 and more. Select a category of 1985 Subaru GL-10 Towing Products below and start saving instantly.
Popular 1985 Subaru GL-10 Towing Products Categories
Essential Towing Products for 1985 Subaru GL-10s
Hopkins – Connector (Part No.46365)
from
$99.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights. The Short-Proof Power Taillight Converter is also a self-resetting power converter that will reset after the short has been fixed in the trailer wiring, providing extra protection for the vehicle wiring.
Product Features:
See More
Product Features:
- For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
- Protects Tow Vehicle Electronics And Itself From Wiring Shorts
- Self-Resetting
- Includes 12 Ga. Power Lead Wire
- Includes Fuse/Fuse Assembly/Splices/Cable Ties
- Powers Up To 8.0 Amps Per Output
- Receives Power Directly From The Battery
- Includes Vehicle Side 4 Flat
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)
from
$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.
Product Features:
See More
Product Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design; Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
Hopkins – Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A (Part No.46255)
from
$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.
Product Features:
See More
Product Features:
- For vehicles equipped with independent bulb turn signals or common bulb systems
- Protects tow vehicle electronics from wiring shorts
- Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
- Powers up to 5.0 amps per output
- Receives power directly from the battery
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
CURT – Powered Converter Wiring Kit (10 Amps) (Part No.55151)
from
$20.79
When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle’s electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname “taillight converters”. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicle’s battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8″ ring terminal, a butt connector, a 14-1/2″ cable tie and eight 6″ cable ties. This wiring kit is rated at 10 amps and comes included with CURT powered electrical converters #59146, #59187, #59190, #59200 and #59201.
Product Features:
See More
Product Features:
- Routes power from vehicle battery to powered converter
- Designed for use with battery-powered electrical converters
- 20′ of 12 gauge cross-linked wire for flexible installation
Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)
from
$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.
Product Features:
See More
Product Features:
- 60 inch length
- Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
- Double-molded weatherproof design
- Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
- Includes 4 wire flat extension
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Upgrade your 1985 Subaru GL-10 with Top-Quality Towing Products
When it comes to maintaining or upgrading your 1985 Subaru GL-10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Towing Products are key to keeping your GL-10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Towing Products for the 1985 Subaru GL-10, designed to meet your needs without breaking the bank.
From
Trailer Wiring
replacements to
Trailer Hitches
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Towing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Towing Products for your 1985 Subaru GL-10 at great prices.
Our Towing Products inventory for this model
ranges from just $18.79 to $39.99, with
an average price of $26.52.
Our 3 Towing Products in stock come from 2 trusted brands, so you’re sure to find the right part for your 1985 Subaru GL-10 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Subaru GL-10, we stock popular OEM and aftermarket Towing Products from top names
like Hopkins, and more.
Hopkins Towing Products
start at just $18.79 and boast an impressive 4 stars average rating from customers.
With 32 customer reviews and counting, our 1985 Subaru GL-10 Towing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Towing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 Subaru GL-10 is always ready to roll. We’re committed to providing you with everything you need to keep your GL-10 in top shape, all in one place.
Start shopping confidently below for your 1985 Subaru GL-10!
Best-Selling Trailer Wiring for 1985 Subaru GL-10s
Enhance the driving experience in your Subaru with 2 quality Trailer Wiring components, starting at $20.79.
Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)
from
$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.
Product Features:
See More
Product Features:
- 60 inch length
- Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
- Double-molded weatherproof design
- Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
- Includes 4 wire flat extension
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
CURT – Powered Converter Wiring Kit (10 Amps) (Part No.55151)
from
$20.79
When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle’s electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname “taillight converters”. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicle’s battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8″ ring terminal, a butt connector, a 14-1/2″ cable tie and eight 6″ cable ties. This wiring kit is rated at 10 amps and comes included with CURT powered electrical converters #59146, #59187, #59190, #59200 and #59201.
Product Features:
See More
Product Features:
- Routes power from vehicle battery to powered converter
- Designed for use with battery-powered electrical converters
- 20′ of 12 gauge cross-linked wire for flexible installation
Most Popular 1985 Subaru GL-10 Trailer Hitches
Customize your Subaru with 1 Trailer Hitches products
like Trailer Wire Converters, all
priced under $18.79.
Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)
from
$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.
Product Features:
See More
Product Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design; Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
Top-Rated Towing Products Brands For Your 1985 Subaru GL-10
Shop for the best-rated brands offering Towing Products and other products for your 1985 Subaru GL-10s. Below you’ll find some of our best rated Towing Products from Hopkins, and more. Towing Products from these brands that fit a 1985 GL-10 start at just $18.79 and are rated as high as 4 stars. OEM and aftermarket Towing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Hopkins 1985 Subaru GL-10 Towing Products
When it comes to maintaining or upgrading your 1985 Subaru GL-10, using quality Towing Products is essential to ensure durability and a perfect fit. Hopkins ticks all of those boxes. We offer a wide selection of Hopkins Towing Products, specifically designed for the 1985 Subaru GL-10. With over 2 Hopkins brand Towing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.79, with an average price of just $29.39. Plus, with over 16 customer reviews and an average rating of 4 stars, you can trust that our Hopkins Towing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$39.99
$39.99
(16)
46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)
“The splice connectors were better than expected, easy to use. Love the included tester, takes guess work out of it. Made for an easy install and every”
FAQs for 1985 Subaru GL-10 Towing Products
Which Towing Products are best-sellers for 1985 Subaru GL-10s?
Out of 3 Towing Products that fit 1985 Subaru GL-10s, the following parts are the top sellers:
- LITE MATE 3-2 CONVTR (89013192) – $18.79
- Powered Converter Wiring Kit (10 Amps) (22011456) – $20.79
What’s the price range for 1985 Subaru GL-10 Towing Products?
Towing Product prices for the 1985 Subaru GL-10 start at $18.79 and go up to $39.99 for the most premium parts.
What’s the average price of a Towing Product for a 1985 Subaru GL-10?
The average price for Towing Products for the 1985 Subaru GL-10 is $26.52. Keep in mind the variety of part types within our Towing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Towing Products for other Subaru GL-10 model years?
What are the cheapest Towing Products for my 1985 Subaru GL-10?
The cheapest 1985 Subaru GL-10 Towing Products we carry in stock are:
- LITE MATE 3-2 CONVTR (89013192) – $18.79
- Powered Converter Wiring Kit (10 Amps) (22011456) – $20.79
- 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (6253512) – $39.99
What are the top-rated Towing Products that fit the 1985 Subaru GL-10?
Out of 32 reviews by customers, our 1985 Subaru GL-10 Towing Products have an average customer rating of . These are some of the highest-rated Towing Product types for the 1985 Subaru GL-10 and their top-rated products:
- Trailer Wiring
What types of Towing Products do you sell for my 1985 Subaru GL-10?
As of 2/5/25, these are some of the most in-demand types of Towing Products for a 1985 Subaru GL-10:
Can I get help with 1985 Subaru GL-10 Towing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Towing Products and more.
What is your return policy for Subaru GL-10 Towing Products?
Advance Auto Parts keeps returns simple. For new Subaru GL-10 Towing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
