1985 Nissan Stanza Belts and Hoses

Name: Bottom Cog V-Belt; 26 Inch Long, Exact Fit Premium Quality
Brand: Dayco
SKU: 15260
Price: 14.49 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand Nissan Belts and Hoses, components and accessories for your 1985 Stanza. Advance Auto Parts has popular Stanza parts like Serpentine and V Belts, Heater Hoses, Pulleys and more. You’ll also find aftermarket and OEM Belts and Hoses for other Stanza model years including 1983, 1984, 1986, 1987, 1988, 1989, 1990, 1991, 1992 and more. Select a category of 1985 Nissan Stanza Belts and Hoses below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1985 Nissan Stanza Belts and Hoses Categories

Idler Pulleys

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Heater Hoses

By-Pass Hoses

V-Belts

Transmission Oil Cooler Hoses

Essential Belts and Hoses for 1985 Nissan Stanzas

from

$14.49

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$15.79

Provides greater durability and flexibility 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$26.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$12.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$31.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$40.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$71.99

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for Nissan/Infinity/Mitsubishi applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$43.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$46.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$32.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$36.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$23.49

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$36.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$3.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$15.29

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Possesses all the quality characteristics of Gates molded cooling tubing and is similar to original manufacturer specifications.
Designed to resist electrochemical degradation, which is the primary cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature range: -40 Deg. F to +275 Deg. F (-40 Deg. F (+135 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$14.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$17.79

It has all the quality characteristics of Gates molded coolant hose and is similar to OEM specifications.
Engineered to resist electrochemical degradation – the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Compliant with SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$1.29

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$1.99

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

Upgrade your 1985 Nissan Stanza with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1985 Nissan Stanza, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Belts and Hoses are key to keeping your Stanza functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Belts and Hoses for the 1985 Nissan Stanza, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1985 Nissan Stanza at great prices. Our Belts and Hoses inventory for this model ranges from just $1.99 to $59.99, with an average price of $24.22. Our 21 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 1985 Nissan Stanza without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Nissan Stanza, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Driveworks, Imperial, and more. Dayco Belts and Hoses start at just $15.79 and boast an impressive 4.5 stars average rating from customers. Driveworks and Imperial also bring quality to the table, with Belts and Hoses available starting at $4.29, and at an average 4.2 stars rating. With 246 customer reviews and counting, our 1985 Nissan Stanza Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Nissan Stanza is always ready to roll. We’re committed to providing you with everything you need to keep your Stanza in top shape, all in one place. Start shopping confidently below for your 1985 Nissan Stanza!

Best-Selling Serpentine and V Belts for 1985 Nissan Stanzas

Enhance the driving experience in your Nissan with 11 quality Serpentine and V Belt components, starting at $1.99.

show more show less

from

$15.79

Provides greater durability and flexibility 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$14.49

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$12.79

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$4.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$42.49

The fiber-reinforced rubber adds flexibility along the entire length of the belt and ensures greater lateral stability in the pulley.
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$32.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
Meets or exceeds SAE J636C specifications

from

$10.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability & reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses.
Provides greater durability and flexibility – 35% stronger than all previous versions
Provides greater durability and flexibility – 35% stronger than all previous versions
áProvides greater durability and flexibility – 35% stronger than all previous versions

from

$8.29

Provides greater durability and flexibility 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$1.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

Top Picks for 1985 Nissan Stanza Pulleys

Upgrade Nissan Stanzas with top-quality Pulleys parts, including 2 OEM and aftermarket selections for your 1985 model.

show more show less

from

$43.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.99

In-Demand Radiator Hoses for 1985 Nissan Stanzas

Select from 3 premium Radiator Hoses parts for your 1985 Nissan Stanza, with prices ranging from $29.99 to $36.99.

show more show less

from

$29.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$36.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$36.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Most Sold 1985 Nissan Stanza Oil Cooler Hoses

Explore our best-selling Nissan parts for the 1985 Stanza among 2 OEM and aftermarket options starting from $48.99.

show more show less

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

Top-Rated Belts and Hoses Brands For Your 1985 Nissan Stanza

Shop for the best-rated brands offering Belts and Hoses and other products for your 1985 Nissan Stanzas. Below you’ll find some of our best rated Belts and Hoses from Dayco, Driveworks, and Imperial, and more. Belts and Hoses from these brands that fit a 1985 Stanza start at just $4.29 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1985 Nissan Stanza Belts and Hoses

When it comes to maintaining or upgrading your 1985 Nissan Stanza, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1985 Nissan Stanza. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.79, with an average price of just $27.59. Plus, with over 17 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $36.99

(1)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/2 Inch Length

“Best price”

from $29.99

(4)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 3/4 Inch Length

“No problems, easy on.”

from $15.79

(12)

Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality

“I use this as the wheel drive belt for my older riding mower. I have used this belt before as it works much better than the substitute belt manufactur”

Popular Driveworks 1985 Nissan Stanza Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1985 Nissan Stanza owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1985 Stanza, Advance Auto Parts carries a full inventory of 1 Driveworks Belts and Hoses. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Driveworks Belts and Hoses range up to $4.29, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $4.29

(1)

Automotive V-Belt, Driveworks

“Everything working fine”

FAQs for 1985 Nissan Stanza Belts and Hoses

Which Belts and Hoses are best-sellers for 1985 Nissan Stanzas?

Out of 21 Belts and Hoses that fit 1985 Nissan Stanzas, the following parts are the top sellers:

Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality (3300024) – $15.79
Idler Pulley, Dayco (15130011) – $43.99
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 3/4 Inch Length (15590016) – $29.99

What’s the price range for 1985 Nissan Stanza Belts and Hoses?

Belts and Hose prices for the 1985 Nissan Stanza start at $1.99 and go up to $59.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1985 Nissan Stanza?

The average price for Belts and Hoses for the 1985 Nissan Stanza is $24.22. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Nissan Stanza model years?

Yes, we currently carry Belts and Hoses for 9 model years of Nissan Stanzas between 1982 and 1992. Belts and Hoses are bought most frequently for the following model years: 1992, 1991, 1990, 1989, 1988, 1987, 1986, 1984, and 1983.

What are the cheapest Belts and Hoses for my 1985 Nissan Stanza?

The cheapest 1985 Nissan Stanza Belts and Hoses we carry in stock are:

Automotive V-Belt, Driveworks (10065844) – $1.99
Automotive V-Belt, Driveworks (5064449) – $4.29
Automotive V-Belt, Driveworks (5060826) – $4.99
Automotive V-Belt, Driveworks (12025335) – $4.99
V-Belt, Top Cog, Dayco (19270440) – $8.29

What are the top-rated Belts and Hoses that fit the 1985 Nissan Stanza?

Out of 246 reviews by customers, our 1985 Nissan Stanza Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1985 Nissan Stanza and their top-rated products:

Pulleys
- Idler Pulley, Dayco (15130011) – $43.99
Radiator Hoses
- Idler Pulley, Dayco (15130011) – $43.99
Serpentine and V Belts
- Idler Pulley, Dayco (15130011) – $43.99

What types of Belts and Hoses do you sell for my 1985 Nissan Stanza?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1985 Nissan Stanza:

Can I get help with 1985 Nissan Stanza Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Belts and Hoses and more.

What is your return policy for Nissan Stanza Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Nissan Stanza Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1985 Nissan Stanza Belts and Hoses

Dayco – Bottom Cog V-Belt; 26 Inch Long, Exact Fit Premium Quality (Part No.15260)

Dayco – Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality (Part No.15345)

Gates – Automotive XL High Capacity V-Belt (Part No.9325)

Dayco – Bottom Cog V-Belt; 36.5 Inch Long, Exact Fit Premium Quality (Part No.17365)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 81mm Diameter (Part No.900047A)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Dayco – Idler Pulley, Dayco (Part No.89134)

Litens – Idler Pulley: Direct Fit, Steel, 84mm Diameter (Part No.900175A)

Dayco – Idler Pulley, Dayco (Part No.89036)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.36087)

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 12 1/2 Inch Length (Part No.86801)

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 8 1/4 Inch Length (Part No.86800)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length (Part No.80405)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 16 Inch Length (Part No.86051)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Gates – ThermalPro Premium Molded Heater Hose (Part No.18700)

Dayco – Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 12 1/2 Inch Length (Part No.87001)

Gates – Premium Molded Heater Hose (Part No.18020)

Dayco – Straight Heater Hose; EPDM Rubber, 3/8 Inch Diameter (sold by foot) (Part No.80259)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Dayco – Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality (Part No.15345)

Dayco – Bottom Cog V-Belt; 26 Inch Long, Exact Fit Premium Quality (Part No.15260)

Dayco – Bottom Cog V-Belt; 31.25 Inch Long, Exact Fit Premium Quality (Part No.17313)

Driveworks – Automotive V-Belt, Driveworks (Part No.34513)

Gates – Automotive XL High Capacity V-Belt (Part No.9309)

Gates – Automotive XL High Capacity V-Belt (Part No.7260)

Dayco – Double Cog V-Belt; 34.5 in. Long, Exact Fit Premium Quality (Part No.22345)

Dayco – V-Belt, Top Cog, Dayco (Part No.15225)

Driveworks – Automotive V-Belt, Driveworks (Part No.26013)

Driveworks – Automotive V-Belt, Driveworks (Part No.31517)

Driveworks – Automotive V-Belt, Driveworks (Part No.22513)

Gates – Premium Molded Heater Hose (Part No.18020)

Gates – ThermalPro Premium Molded Heater Hose (Part No.18700)

Dayco – Idler Pulley, Dayco (Part No.89036)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 81mm Diameter (Part No.900047A)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 3/4 Inch Length (Part No.87617)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/2 Inch Length (Part No.86050)

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 8 1/4 Inch Length (Part No.86800)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)