1985 Mazda RX-7 Ignition and Tune-Up Products
More 1985 Mazda RX-7 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1985 Mazda RX-7, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1985 Mazda RX-7 Ignition and Tune-Up Products
NGK – Spark Plug Wire Set (Part No.8172)
from
$49.49
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Intermotor Red Wire – Spark Plug Wire Set (Part No.52671)
from
$34.49
Spark Plug Wire Set
Intermotor Red Wire – Spark Plug Wire Set (Part No.51971)
from
$39.99
Spark Plug Wire Set
NGK – Ignition Wire Set (Part No.F1020115892NGK)
from
$41.78
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Distributor Reluctor (Part No.REA1028)
from
$24.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)
from
$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.
Product Features:
See More
Product Features:
- Unique friction technology provides efficient and noise-free operation
- Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
- Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
- Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
- Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
Carquest Premium – Distributor Rotor (Part No.DAC1237)
from
$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NGK – OE Series Laser Platinum Spark Plug: Surface Discharge Tip Design, BUR9EQP (Part No.5255)
from
$12.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction platinum alloy center electrode provides consistent performance
- PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
- ROTARY DESIGN: Recessed center electrode surface discharge spark plug designed specifically for rotary engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Rotary engines
NGK – OE Series Laser Platinum Spark Plug: Surface Discharge Tip Design, BUR7EQP (Part No.4764)
from
$12.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction platinum alloy center electrode provides consistent performance
- PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
- ROTARY DESIGN: Recessed center electrode surface discharge spark plug designed specifically for rotary engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Rotary engines
NGK – Laser Platinum Spark Plug (Part No.F100037112NGK)
from
$11.56
NGK Laser Platinum spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. The platinum disc welded to backside of ground electrode provides long life, faster starts and quicker acceleration. Laser Platinum spark plugs provide high ignitability and longer service life.
Product Features:
See More
Product Features:
- Laser welded Platinum center electrode tip
- Platinum disc welded to backside of ground electrode provides long life
- Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
- Faster starts and quicker acceleration
- Better fuel economy and lower emissions
- Best Platinum spark plug available
- Original Equipment Manufacturer approved design
NGK – OE Series Standard Nickel Spark Plug: Surface Discharge Tip Design, BUR7EQ (Part No.6917)
from
$9.99
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- Triple Gasket Sealing: Designed with triple gasket sealing to prevent combustion gas leakage, ensuring efficient engine performance.
NGK – OE Series Standard Nickel Spark Plug: Conventional Tip Design, BR8EQ-14 (Part No.2329)
from
$9.99
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
NGK – Standard Spark Plug (Part No.F1000319853NGK)
from
$10.60
The NGK Standard copper core spark plug provides OEM quality, consistent performance and extended long life.
Product Features:
See More
Product Features:
- Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
- Corrugated Ribs Prevent Flashover
- Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
- Copper Core Aids in Heat Removal
- Triple Seals Prevent Leakage
NGK – Laser Platinum Spark Plug (Part No.F100037114NGK)
from
$11.87
NGK Laser Platinum spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. The platinum disc welded to backside of ground electrode provides long life, faster starts and quicker acceleration. Laser Platinum spark plugs provide high ignitability and longer service life.
Product Features:
See More
Product Features:
- Laser welded Platinum center electrode tip
- Platinum disc welded to backside of ground electrode provides long life
- Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
- Faster starts and quicker acceleration
- Better fuel economy and lower emissions
- Best Platinum spark plug available
- Original Equipment Manufacturer approved design
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1939)
from
$42.49
Distributor Cap and Rotor Kit
Carquest Premium – Distributor Cap (Part No.CAE1408)
from
$44.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1682)
from
$163.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1527)
from
$17.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1464)
from
$61.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1579)
from
$37.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Popular 1985 Mazda RX-7 Ignition and Tune-Up Products Categories
1985 Mazda RX-7 Ignition and Tune-Up Products
You count on your 1985 Mazda RX-7 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 14 Ignition and Tune-Up Products ranging in price from $6.29 to $49.49, you’re sure to find everything you need for your 1985 Mazda RX-7.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 5 different brands like NGK, Carquest Premium, and Intermotor Red Wire. 1985 Mazda RX-7 Ignition and Tune-Up Products start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 6 extensive product reviews on 1985 Mazda RX-7 Ignition and Tune-Up Products.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1985 Mazda RX-7 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1985 Mazda RX-7
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Mazda RX-7 running right for years to come. In our inventory you’ll find brands like NGK, Carquest Premium, Intermotor Red Wire, and even more.
Popular NGK Ignition and Tune-Up Products
You’ll find popular NGK brand products across Spark Plugs. All are waiting to get your 1985 Mazda RX-7 back on the road. Some of the top-rated NGK products in these categories are:
from
$12.99
(2)
OE Series Laser Platinum Spark Plug: Surface Discharge Tip Design, BUR9EQP
Spark Plugs
from
$10.99
(2)
OE Series Standard Nickel Spark Plug: Surface Discharge Tip Design, BUR9EQ
Spark Plugs
FAQs for 1985 Mazda RX-7 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1985 Mazda RX-7?
Out of 14 Ignition and Tune-Up Products for the 1985 Mazda RX-7, the most popular in our inventory are:
from
$37.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
