1985 Lincoln Mark VII Steering and Chassis Parts
More 1985 Lincoln Mark VII Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1985 Lincoln Mark VII, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1985 Lincoln Mark VII Steering and Chassis Parts
Carquest Premium – Return Hose Assembly (Part No.35611)
from
$57.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – Suspension Sway Bar Bushing (Part No.DW-K80092)
from
$8.79
Driveworks sway bar bushings are made to meet or exceed OE specifications. They are dampening devices used on the sway bar to help prevent vehicle rollover. Driveworks chassis parts promote improved steering response and durability.
See More
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Cardone – Remanufactured Power Steering Pump w/Reservoir (Part No.20-7254F)
from
$70.99
CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the origi
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
MOOG – Rack & Pinion Mounting Bushing (Part No.K8422)
from
$25.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)
from
$4.49
This power steering pump washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Power Steering Pump Pulley (Part No.300-003)
from
$50.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Camber Bolt Kit (Part No.DW-K90476)
from
$8.99
Camber Bolt Kit
National – Multi Purpose Seal (Part No.471645)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
MOOG – Camber Adjusting Kit (Part No.K90476)
from
$32.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-900)
from
$33.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.
Product Features:
See More
Product Features:
- Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
- Complete assembly – includes reservoir and reservoir cap
- Reliable performance – built to withstand excessive heat and vibration
- Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
Cardone Service Plus – Rack and Pinion Hydraulic Transfer Tubing Assembly (Part No.3L-1206)
from
$57.99
CARDONE Rack and Pinion Transfer Tubing Assembly Kits include new components designed to meet OEM performance for form, fit, and function. All components necessary to complete the job are included to ensure your vehicle runs smoothly.
Product Features:
See More
Product Features:
- 100% new tubing and connectors to ensure long lasting performance
- New seals are provided where applicable
- All components are included to ensure your vehicle runs smoothly
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Driveworks – Taper Bearing Set (Part No.S-A-12)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Cardone – Rack and Pinion Assembly (Part No.22-207)
from
$137.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Rare Parts – Sway Bar Link Kit (Part No.RP16304)
from
$41.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Powercraft – Rack Pinion Seal Kit (Part No.8621)
from
$64.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$47.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Hose Assembly (Part No.36487)
from
$74.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)
from
$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Tie Rod End (Part No.RP26910)
from
$59.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Powercraft – Pump Seal Kit (Part No.8526)
from
$13.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
TRW – Ball Joint (Part No.L2020195701TRW)
from
$54.27
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$26.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Driveworks – Rack/Pinion Boot Kit (Part No.DW-K8439)
from
$15.99
Driveworks Brand chassis parts promote improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
TRW – Stabilizer Link Kits (Part No.L1029451335TRW)
from
$24.69
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.
Product Features:
See More
Product Features:
- Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
- Provides improved fuel economy, lower emissions and excellent driving comfort
- Reduce weight and damping vibrations
- Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Help – Power Steering Caps (Part No.82582)
from
$7.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Popular 1985 Lincoln Mark VII Steering and Chassis Parts Categories
1985 Lincoln Mark VII Steering and Chassis Parts
You count on your 1985 Lincoln Mark VII to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 80 Steering and Chassis Parts ranging in price from $2.49 to $552.99, you’re sure to find everything you need for your 1985 Lincoln Mark VII.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like DriveWorks, Carquest Premium, and Imperial. 1985 Lincoln Mark VII Steering and Chassis Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,825 extensive product reviews on 1985 Lincoln Mark VII Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Power Steering Filter with 3.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1985 Lincoln Mark VII below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1985 Lincoln Mark VII
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Lincoln Mark VII running right for years to come. In our inventory you’ll find brands like DriveWorks, Carquest Premium, Imperial, and even more.
Popular National Steering and Chassis Parts
You’ll find popular National brand products across Steering Knuckles. All are waiting to get your 1985 Lincoln Mark VII back on the road. Some of the top-rated National products in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 1985 Lincoln Mark VII, and some of our most reviewed Driveworks parts include:
FAQs for 1985 Lincoln Mark VII Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1985 Lincoln Mark VII?
Out of 80 Steering and Chassis Parts for the 1985 Lincoln Mark VII, the most popular in our inventory are:
from
$5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
What are the top-rated 1985 Lincoln Mark VII Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1985 Lincoln Mark VII based on customer reviews/ratings are:
from
$50.99
(19)
Power Steering Pump Pulley
“I don’t like that this was made in china but it did fit fine.”
