1985 Dodge W250 Performance and Racing Products

Essential Performance and Racing Products for 1985 Dodge W250s

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952547)

Super 40 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Hooker Headers – Competition Header (Part No.5902HKR)

Competition Header

from

$329.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)

Unilite Electronic Ignition Distributor Series 37

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Edelbrock – Water Pump Chrysler 1969-85 318/ 360 in Polished Finish (Part No.8887)

Water Pump Chrysler 1969-85 318/ 360 in Polished Finish

from

$426.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Energy Suspension – Hyper-Flex System (Part No.5.18102G)

Hyper-Flex System

from

$159.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Spectre – Valve Cover (Part No.5274)

Valve Cover

from

$64.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1965-1991 Chrysler 273-318-340-360 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:
  • Designed for 1965-1991 Chrysler 273-318-340-360 engines
  • Baffled for breather system compatibility
  • Sold in pairs
  • Triple chrome-plated steel construction
  • Stock height
  • Features OEM style sealing edge
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)

Oil Pan Bolt Kit

from

$18.99
Oil Pan Bolt Kit

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1213)

Lower Intake Manifold Gasket Set: 6 Piece Set

from

$38.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

B & M – Flexplate, 6 Bolt Crank for TF 727 (Part No.10230)

Flexplate, 6 Bolt Crank for TF 727

from

$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up TF727 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 6-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.00 or 11.125 inch converter mounting locations and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

Mechanical Fuel Pump Mounting Pad Cover

from

$17.79
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1350-8759)

Drive Shaft Pinion Yoke

from

$254.99


Product Features:
  • BILLET HP 1350-29 SPLINE YOKE
See More

Flowtech – Header Gasket Set (Part No.99361FLT)

Header Gasket Set

from

$18.59
Header Gasket Set

Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7326)

Cylinder Head Gasket Set for Chrysler

from

$61.99
Product Features:
  • Cylinder Head Gasket
  • 1966-1987 318-340-360
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Rancho – RS5000 Steering Damper (Part No.RS5403)

RS5000 Steering Damper

from

$78.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
  • ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
  • HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
See More

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

High-Performance Ignition Coil - Direct OE Fit

from

$72.39
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Uf-198
  • MSD 8228
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

B & M – Flexplate, TF 727 360 CID (Part No.10236)

Flexplate, TF 727 360 CID

from

$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1971-92 Chrysler, Dodge and Plymouth (externally balanced) 360ci V8 engine (6-bolt crankshaft flange) and A727 transmission. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 and 11.125 inch bolt patterns and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)

Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish

from

$521.99
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Mr. Gasket – Valve Cover Gasket Set (Part No.379)

Valve Cover Gasket Set

from

$36.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-4003)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Hays – Comp/Trk Clutch Kit-1O.5 Chry (Part No.85-301)

Comp/Trk Clutch Kit-1O.5 Chry

from

$601.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mr. Gasket – Header Bolts (Part No.976)

Header Bolts

from

$22.49
When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.

Product Features:
  • 14 per Package
  • Heat-Treated For Strength
  • Ideal For Tight Spaces
  • Grade 5 Material
  • Protective Black Finish
See More

Edelbrock – Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp) (Part No.70001)

Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp)

from

$724.99
The Edelbrock Performer Nitrous Plate System #70001 is designed to increase your power from 50-100 horsepower. Edelbrock Nitrous systems are simple to install with a 1/2″ thick aluminum plate that fits between the carburetor and the intake manifold. Edelb
See More

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)

Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$451.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Spectre – Differential Cover (Part No.6089)

Differential Cover

from

$79.99
Spectre’s 12 bolt Differential Covers feature a triple chrome plated steel construction. Designed to perform as well as they look, these covers fit a variety of vehicles. Use the Spectre application search for vehicle specific lookup. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • Triple chrome plated steel
  • Gasket included
  • 12 bolt design
  • 12 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
See More

Upgrade your 1985 Dodge W250 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Dodge W250, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your W250 functioning at its best. At Advance Auto Parts, we offer a wide selection of 76 Performance and Racing Products for the 1985 Dodge W250, designed to meet your needs without breaking the bank. From Performance Fuel System replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Dodge W250 at great prices. Our Performance and Racing Products inventory for this model ranges from just $17.49 to $1,093.99, with an average price of $261.16. Our 76 Performance and Racing Products in stock come from 21 trusted brands, so you’re sure to find the right part for your 1985 Dodge W250 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Dodge W250, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Mr. Gasket, Edelbrock, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. Mr. Gasket and Edelbrock also bring quality to the table, with Performance and Racing Products available starting at $17.49, and at an average 4 stars rating. With 612 customer reviews and counting, our 1985 Dodge W250 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Dodge W250 is always ready to roll. We’re committed to providing you with everything you need to keep your W250 in top shape, all in one place. Start shopping confidently below for your 1985 Dodge W250!

Best-Selling Performance Fuel Systems for 1985 Dodge W250s

Enhance the driving experience in your Dodge with 9 quality Performance Fuel System components, starting at $17.79.

Edelbrock – CARBURETOR (Part No.14054)

CARBURETOR

from

$488.99
Product Features:
  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Can Add Electric Choke PN[1478]
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$428.99
The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$451.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

Mechanical Fuel Pump Mounting Pad Cover

from

$17.79
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S
See More

Edelbrock – CARBURETOR (Part No.14064)

CARBURETOR

from

$541.99
Product Features:
  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.1826)

Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR)

from

$464.99
New or reconditioned 650cfm. Square-flange. Electric choke without EGR. Primary jet 0.095. Secondary jet 0.098. Metering Rod 0.065 x 0.047. Dual plane intake. Spring loaded needles and seat increase performance. New qwik-tune adjustable secondary air valve. Distinctive black accented hardware. Lightweight ball burnished aluminum. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage.

Product Features:
  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
See More

Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)

Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$413.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Manual Choke Type
  • 800 cfm Maximum Flow Rating
See More

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$407.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Annular Booster Type
  • Manual Choke Type
  • 750 cfm Maximum Flow Rating
See More

Most Popular 1985 Dodge W250 Performance Ignition Products

Customize your Dodge with 3 Performance Ignition Products products like Performance Coils and Performance Ignition Parts, all priced under $186.99.

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Top Picks for 1985 Dodge W250 Performance Exhaust Products

Upgrade Dodge W250s with top-quality Performance Exhaust Products parts, including 8 OEM and aftermarket selections for your 1985 model.

Hooker Headers – Competition Header (Part No.5902HKR)

Competition Header

from

$329.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Flowtech – Header Gasket Set (Part No.99361FLT)

Header Gasket Set

from

$18.59
Header Gasket Set

Flowtech – Standard Header (Part No.13500FLT)

Standard Header

from

$252.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Flowtech – Ceramic Header (Part No.33500FLT)

Ceramic Header

from

$572.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Ceramic Headers
  • Rust And Corrosion Resistance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5935)

Ultra Seal: Exhaust Gasket Set

from

$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Has A Steel Core With Graphite Facing
  • Graphite Facing Has Excellent Thermo-conductivity
  • High Recovery Mat Allows For Better Seal Retention
See More

Mr. Gasket – Header Bolts (Part No.976)

Header Bolts

from

$22.49
When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.

Product Features:
  • 14 per Package
  • Heat-Treated For Strength
  • Ideal For Tight Spaces
  • Grade 5 Material
  • Protective Black Finish
See More

Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842541)

Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound

from

$154.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)

Exhaust Manifold Gasket Set

from

$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

In-Demand Performance Oil Filters for 1985 Dodge W250s

Select from 2 premium Performance Oil Filters parts for your 1985 Dodge W250, with prices ranging from $17.99 to $97.99.

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Remote Oil Filter Kit

from

$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:
  • Relocate oil filter to an easy access location
See More

Most Sold 1985 Dodge W250 Performance Engines

Explore our best-selling Dodge parts for the 1985 W250 among 27 OEM and aftermarket options starting from $17.49.

Mr. Gasket – Valve Cover Gasket Set (Part No.379)

Valve Cover Gasket Set

from

$36.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

Performance Valve Cover Gasket Set

from

$18.99
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1213)

Lower Intake Manifold Gasket Set: 6 Piece Set

from

$38.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

PERFORMANCE OIL PAN GASKET SET

from

$21.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines (Part No.7276)

Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines

from

$28.99
Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Edelbrock – Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines (Part No.2176)

Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines

from

$397.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$41.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)

PERFORMANCE VALVE COVER GASKET SET

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1243)

Lower Intake Manifold Gasket Set: 6 Piece Set

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)

Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5840)

Ultra Seal: Intake Gasket

from

$42.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

High Energy 218/218 Hydraulic Flat Cam and Lifter Kit

from

$1093.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Weiand – Hi-Ram Intake Manifold (Part No.1995)

Hi-Ram Intake Manifold

from

$703.99
Hi-Ram Intake Manifold

Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)

Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish

from

$521.99
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Edelbrock – Victor Intake Manifold Small-Block Chrysler (Part No.2915)

Victor Intake Manifold Small-Block Chrysler

from

$473.99
For 3500 to 8000 RPM high-performance engines. For standard rectangular port heads. For oval track and drag race engines. Superior horse power and torque potential.

Product Features:
  • For 3500 to 8000 RPM High-Performance Engines
  • For Standard Rectangular Port Heads
  • For Oval Track/Drag Race Engines
  • Superior Horse Power And Torque Potential
See More

Edelbrock – RPM Air-Gap Small Block Chrysler Intake Manifold (Part No.7576)

RPM Air-Gap Small Block Chrysler Intake Manifold

from

$473.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only. Non-EGR. Mopar 340-360. 4 bbl carb. For street and high pe

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed For 1500 To 6500 RPM
  • Dual-Plane High-Rise Intake
  • Accepts Early-Style Waterneck
See More

Edelbrock – Performer Intake Manifold Small-Block Chrysler (Part No.3776)

Performer Intake Manifold Small-Block Chrysler

from

$449.99
Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Edelbrock – Water Pump Chrysler 1969-85 318/ 360 in Polished Finish (Part No.8887)

Water Pump Chrysler 1969-85 318/ 360 in Polished Finish

from

$426.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Torker II 340/360 Small Block Chrysler Intake Manifold (Part No.5076)

Torker II 340/360 Small Block Chrysler Intake Manifold

from

$425.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. Can be used on 318 cid if 340/360 heads used. Available in cast or polished.

Product Features:
  • 2500 to 6500 RPM High Performance Street Engines
  • Single-Plane Low-Rise Intake Good for High RPM
  • Ideal for Applications with Limited Hood Clearance
  • For Top-End HP and Adequate Throttle Response
  • Not for Mileage or Emissions Applications
  • Can be Used on 318 cid if 340/360 Heads Used
See More

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)

Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit

from

$378.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Edelbrock – XX Victor W-2 Intake Manifold for Chrysler 340-360 w/Chrysler W2 Oval Port Head (Part No.2920)

XX Victor W-2 Intake Manifold for Chrysler 340-360 w/Chrysler W2 Oval Port Head

from

$351.99
Race winning performance. For 3500 to 8000 RPM high-performance engines. For oval track and drag race engines. Use appropriate racing carburetor.

Product Features:
  • For 3500 to 8000 RPM High-Performance Engines
  • for Oval Track And Drag Race Engines
  • Race Winning Performance
  • Use Appropriate Racing Carburetor
See More

Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7326)

Cylinder Head Gasket Set for Chrysler

from

$61.99
Product Features:
  • Cylinder Head Gasket
  • 1966-1987 318-340-360
See More

Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7592)

Valve Cover Gasket Set for Chrysler

from

$28.99
Product Features:
  • 5/16 in. Thick
  • Conforms to warped flanges, giving them better sealing capabilities
  • Graphite-impregnated facing and steel expanded metal core
  • Does not deteriorate or crack under excessive heat and pressure
  • Sold as a pair
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

Super Intake Manifold Bolts

from

$27.49
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:
  • Assures Accurate Torque App
  • Prevents Galling Manifold
  • Grade 5 Material
  • Black Oxide Coasted
See More

Top-Rated Performance and Racing Products Brands For Your 1985 Dodge W250

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Dodge W250s. Below you’ll find some of our best rated Performance and Racing Products from K&N, Mr. Gasket, and Edelbrock, and more. Performance and Racing Products from these brands that fit a 1985 W250 start at just $17.49 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1985 Dodge W250 Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Dodge W250, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1985 Dodge W250. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 120 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Popular Mr. Gasket 1985 Dodge W250 Performance and Racing Products

Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Dodge W250 owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1985 W250, Advance Auto Parts carries a full inventory of 10 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $97.99, plus, with more than 22 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Thermocap Radiator Cap
from
$48.09
This product is not rated

Thermocap Radiator Cap

“”

Remote Oil Filter Kit
from
$97.99
This product is not rated

Remote Oil Filter Kit

“”

FAQs for 1985 Dodge W250 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1985 Dodge W250s?

Out of 76 Performance and Racing Products that fit 1985 Dodge W250s, the following parts are the top sellers:

What’s the price range for 1985 Dodge W250 Performance and Racing Products?

Performance and Racing Product prices for the 1985 Dodge W250 start at $17.49 and go up to $1,093.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1985 Dodge W250?

The average price for Performance and Racing Products for the 1985 Dodge W250 is $261.16. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Dodge W250 model years?

Yes, we currently carry Performance and Racing Products for 12 model years of Dodge W250s between 1981 and 1993. Performance and Racing Products are bought most frequently for the following model years: 1993, 1992, 1991, 1990, 1989, 1988, 1987, 1986, and 1984.

What are the cheapest Performance and Racing Products for my 1985 Dodge W250?

The cheapest 1985 Dodge W250 Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1985 Dodge W250?

Out of 612 reviews by customers, our 1985 Dodge W250 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1985 Dodge W250 and their top-rated products:

What types of Performance and Racing Products do you sell for my 1985 Dodge W250?

Can I get help with 1985 Dodge W250 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

What is your return policy for Dodge W250 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Dodge W250 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.