1985 Dodge B150 Differentials

Essential 1985 Dodge B150 Differentials

Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’92-’03 Chrysler 9.25" Van (Part No.21033)

1541H Alloy 5 Lug Rear Axle For '92-'03 Chrysler 9.25" Van

from

$377.99
Yukon 1541H alloy 5 lug rear axle for ’92-’03 Chrysler 9.25″ van with a length of 32-5/8 inches and 31 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • 31 spline
  • 5 lug
  • 32 5/8″ long
  • Fits Chrysler 9.25″ in 1992 and up Dodge van
See More

Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)

Rubber Fill Plug For Chrysler

from

$22.99
Product Features:
  • Rubber fill plug
  • Fits Chrysler 7.25″, 8.25″ and 9.25″
See More

Pro-King – Clutch Pack (Part No.723A119)

Clutch Pack

from

$122.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – Grip LS Traction System (Part No.LS309231)

Grip LS Traction System

from

$511.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

USA Standard Gear – Open Spider Gear Set For Chrysler 9.25", 31 Spline (Part No.39004)

Open Spider Gear Set For Chrysler 9.25", 31 Spline

from

$209.99
Product Features:
  • Fits Chrysler 9.25″ rear with open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Carrier Installation Kit For Chrysler 9.25" Rear Differential (Part No.57001)

Carrier Installation Kit For Chrysler 9.25" Rear Differential

from

$173.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Chrysler 9.25″ rear differential. This kit contains carrier bearings and races.

Product Features:
  • Fits Chrysler 9.25″ rear
  • Includes carrier bearings and races
See More

Motive Gear – Differential Gear Install Kit (Part No.C9.25IK)

Differential Gear Install Kit

from

$28.99
Product Features:
  • MINI INSTALL KIT CHRYSLER 9.25 9 1/4″
See More

Pro-King – Differential Internal Nest Kit (Part No.723A717)

Differential Internal Nest Kit

from

$227.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

USA Standard Gear – Pinion Installation Kit For ’76 And Up Chrysler 8.25" (Part No.60020)

Pinion Installation Kit For '76 And Up Chrysler 8.25"

from

$159.99
Yukon yoke for GM 12 bolt car & truck, 1330 u/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1976 and up Chrysler 8.25″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25"

from

$26.99
Product Features:
  • Pinion nut
  • Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Needa Parts – Rubber Differential Plug Chrysler 2008-2000 (sold by each) (Part No.090-062)

Rubber Differential Plug Chrysler 2008-2000 (sold by each)

from

$10.99
This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25" (Part No.33278)

Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25"

from

$98.99
Six piece side gear thrust washer kit for Chrysler 8″ and 9.25″.

Product Features:
  • Side gear thrust washer kit
  • Fits Chrysler 8″ and 9.25″
See More

Motive Gear – Differential Crush Sleeve (Part No.3507678)

Differential Crush Sleeve

from

$2.29


Product Features:
  • CRUSH SLEEVE 9.25 MIN ORDER 5000
See More

Yukon Gear – Pinion Install Kit For ’76 And Newer Chrysler 8.25" Differential (Part No.13004)

Pinion Install Kit For '76 And Newer Chrysler 8.25" Differential

from

$159.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1976 and up Chrysler 8.25″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Set Up Bearing (Part No.56046)

Set Up Bearing

from

$153.99
M804049 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits HM804049 pinion bearing
  • Easily slips on and off pinion journal to allow for pinion depth adjustment
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55047)

DIFFERENTIAL GASKET

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Steel Cover For Chrysler 9.25" Rear (Part No.32314)

Steel Cover For Chrysler 9.25" Rear

from

$93.99
Product Features:
  • Fits Chrysler 9.25″ rear
  • Steel
See More

USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)

Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Chrysler 8.25″ with 27 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Bearing Race Driver (Part No.56021)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M804010 race
  • All steel construction
See More

Yukon Gear – Positraction Spiders For Chrysler9.25" Dura Grip Posi, 31 Spline, No Clutches Included (Part No.16180)

Positraction Spiders For Chrysler9.25" Dura Grip Posi, 31 Spline, No Clutches Included

from

$389.99
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Chrysler 9.25″
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
  • Fits Yukon Dura Grip
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Motive Gear – Ring Gear Bolt (Part No.14066913)

Ring Gear Bolt

from

$2.49


Product Features:
  • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
See More

Yukon Gear – Ring Gear Bolt For Chrysler 9.25" Rear (Part No.33033)

Ring Gear Bolt For Chrysler 9.25" Rear

from

$9.99
Ring gear bolt for Chrysler 9.25″ rear, 7/16″ x 18.

Product Features:
  • Ring gear bolt for Chrysler 9.25″ rear
See More

1985 Dodge B150 Differentials

Maybe you’re in the middle of a full rebuild of that 1985 Dodge B150. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 185 different Differentials in our inventory ranging from $1.99 to $1,849.99. That means you can find the exact parts or products you need to keep that 1985 Dodge B150 running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Dodge B150. Driveworks, FELPRO, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1985 Dodge B150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 564 reviews in this category, some of the top rated parts include Differential Plug, Rubber with 4.8 stars and Differential Shaft Lock Bolt with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1985 Dodge B150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1985 Dodge B150 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Dodge B150 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your B150 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Yukon Gear Differentials

We carry Yukon Gear parts in our stock across Differential Cross Pins categories, plus more. For a 1985 Dodge B150, our most popular Yukon Gear Differentials include:
Cross Pin Shaft For Standard Open Chrysler 9.25"
from $46.99
(1)
Cross Pin Shaft For Standard Open Chrysler 9.25"
Differential Cross Pins

Top 1985 Dodge B150 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1985 Dodge B150. Popular Felpro parts include:
Differential Cover Gasket
from $9.49
(34)
Differential Cover Gasket
Rear Differential Cover Gaskets
DIFFERENTIAL GASKET
from $6.79
(21)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

FAQs for 1985 Dodge B150 Differentials

What are the most purchased Differentials for the 1985 Dodge B150?

Out of 185 Differentials for the 1985 Dodge B150, the most popular in our inventory are:
Taper Bearing Set
from $10.79
(33)
Taper Bearing Set
Differential Bearings
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1985 Dodge B150 Differentials?

Top-rated Differentials for your 1985 Dodge B150 based on customer reviews/ratings are:
Differential Plug, Rubber
from $5.99
(11)
Differential Plug, Rubber
“I used this Rubber plug to fill a pre-drilled hole in a air intake tube that I customized for a particular application in my car, and it works beautif”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Bearings
from $9.99
(8)
Bearings
“Fit like a glove. Sealed up the diff like mighty putty on steroids”