1985 Chevrolet Astro Drive Shafts and Axles
More 1985 Chevrolet Astro Drive Shafts and Axles
Find your specific 1985 Chevrolet Astro original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1985 Chevrolet Astro Drive Shafts and Axles
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)
from
$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 7.5″, 7.625″ and 8.2″
Driveworks – Wheel Bearing (Part No.S-RP-513023)
GM Genuine Parts – Front Drive Axle Inner Shaft Bearing (Part No.26053326)
from
$13.49
GM Genuine Parts Axle Shaft Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support and allow the axle shaft to rotate with minimal friction. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Supports and allows the axle shaft to rotate with minimal friction
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Yukon Gear – Axle Bearing & Seal Kit For Astro Van Rear (Part No.10038)
from
$146.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit, TorringtonBrand, 2.445″ OD, for ’02 and older Astro and Safari. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for 2002 and older Astro van
- Includes axle bearing and seal
- Services one side
Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)
from
$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- 2.800″ O.D.
- 1.620″ I.D.
Dorman – Driveshaft Slip Yoke (Part No.697-558)
from
$217.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
- Effective fix – replacement restores safe, smooth driveline operation
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design (Part No.41090)
from
$184.99
Yukon yoke for GM 7.5″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 7.5″ and 7.625″
- 27 spline
- Mechanics 3R u-joint size
- Inside snap ring design
- 2.556″ snap ring span
- 1.125″ cap diameter
- Strap style
Yukon Gear – Axle Seal For ’88 And Newer GM 8.5" Chevy C10 (Part No.30108)
from
$11.99
Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits 1988 and up GM half ton truck
- 2.800″ O.D.
- 1.620″ I.D.
Yukon Gear – 7.2" 97-03 Inner Side Seal (Part No.30270)
from
$30.99
7.2″ 97-03 inner side seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Fits 1997-2003 GM 7.2″ IFS
- Right hand side
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)
from
$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2012
- Weight approx: 1 Lbs
- CUSHION INSERT ONLY
- FOR COMPLETE MOUNT SEE PART 6056
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Dorman – Spindle Nut (Part No.K1002831647DOR)
from
$5.57
Spindle Nut
Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)
Dorman – Rear Drive Shaft (Part No.986-271)
from
$751.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9146)
from
$489.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Rear Drive Shaft: Adjustable (Part No.946-528)
from
$537.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft: Greaseable (Part No.976-880)
from
$671.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-9355)
from
$407.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Rear Drive Shaft: Greaseable (Part No.976-916)
from
$716.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Popular 1985 Chevrolet Astro Drive Shafts and Axles Categories
1985 Chevrolet Astro Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1985 Chevrolet Astro. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 17 different Drive Shafts and Axles in our inventory ranging from $5.29 to $883.99. That means you can find the exact parts or products you need to keep that 1985 Chevrolet Astro running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Chevrolet Astro. National, Spicer, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1985 Chevrolet Astro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1985 Chevrolet Astro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1985 Chevrolet Astro Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Chevrolet Astro demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Astro the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular National Drive Shafts and Axles
We carry National parts in our stock across Axle Shaft Bearings categories, plus more. For a 1985 Chevrolet Astro, our most popular National Drive Shafts and Axles include:
FAQs for 1985 Chevrolet Astro Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1985 Chevrolet Astro?
Out of 17 Drive Shafts and Axles for the 1985 Chevrolet Astro, the most popular in our inventory are:
