1985 Buick Skyhawk Engine Parts
Find Your Specific 1985 Buick Skyhawk Engine Parts
Below you will find various in-demand Buick Engine Parts, components and accessories for your 1985 Skyhawk. Advance Auto Parts has popular Skyhawk parts like Engine Mounts, Engine Gaskets and Seals, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Skyhawk model years including
1979,
1980,
1982,
1983,
1984,
1986,
1987,
1988,
1989 and more. Select a category of 1985 Buick Skyhawk Engine Parts below and start saving instantly.
Popular 1985 Buick Skyhawk Engine Parts Categories
Essential Engine Parts for 1985 Buick Skyhawks
Carquest Premium – New Map Sensor (Part No.ECE1103)
from
$91.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-98)
from
$9.99
A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Sealed Power – Engine Valve Lifter (Part No.HT-969)
from
$8.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Cardone – Remanufactured Engine Control Computer (Part No.77-7749)
from
$104.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100 percent computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Cloyes Gear – Engine Timing Chain (Part No.C359)
from
$15.99
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Dorman – Pipe Plug C.S. Hex 1/8-27 Npt x 5/16 In. (Sold by each) (Part No.090-046)
from
$2.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S323)
from
$4.29
Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
National – Shaft Repair Sleeve (Part No.99298)
from
$52.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Dorman – Pik-a-Nut – Steel Cup Expansion Plug 34.3mm, Height 0.497 (Part No.362765.1)
from
$1.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Connecting Rod Bearing (Part No.2500RAA)
from
$9.29
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- A-Series bi-metal aluminum alloy
- Greater seizure resistance than tri-metal material
- Dramatically reduces or eliminates bearing wear
- Made with silicon to provide greater surface hardness
- Silicon particles help polish crankshaft journal to further reduce wear during operation
- Utilizes ISO & QS certified manufacturing
Melling – Stock Replacement OE Type Oil Pump (Part No.M177)
from
$203.99
Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Felpro – Engine Coolant Outlet Gasket (Part No.35258)
from
$4.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
Melling – Stock Replacement Oil Pump Shaft Guide (Part No.M-55024)
from
$1.99
Made In USA. Several Melling oil pump applications require the use of an oil pump shaft guide. Melling provides high quality shaft guides for specific pump applications. An oil pump shaft guide is necessary to connect the oil pump drive shaft to the intermediate drive shaft. Melling recommends installing a new oil pump shaft guide when it is needed.
Product Features:
See More
Product Features:
- Manufactured from high quality nylon for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-2020CP 20)
from
$25.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Imperial – Engine Oil Cooler (Part No.241040)
from
$248.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Swirl-Cool engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5115)
from
$32.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Felpro – Engine Timing Cover Seal (Part No.15200)
from
$9.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – VALVE COVER GASKET SET (Part No.VS 50156 C)
from
$17.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
- SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
Dorman – Rubber Expansion Plug 1-3/8" – Size Range 1-3/8" – 1-1/2" (Sold by each) (Part No.570-008)
from
$18.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Melling – Engine Oil Priming Tool (Part No.MPL-201)
from
$355.99
Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.
See More
Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)
from
$6.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-216)
from
$1.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)
from
$18.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.799-105)
from
$5.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for Length-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
National – Shaft Repair Sleeve (Part No.99176)
from
$46.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Anchor – Engine Mount: Rear Right, 1 Piece (Part No.2477)
from
$12.49
Anchor 2477 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1982-1994
- Weight approx: 2 Lbs
Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10066)
from
$6.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Upgrade your 1985 Buick Skyhawk with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 1985 Buick Skyhawk, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Engine Parts are key to keeping your Skyhawk functioning at its best. At Advance Auto Parts, we offer a wide selection of 68 Engine Parts for the 1985 Buick Skyhawk, designed to meet your needs without breaking the bank.
From
Engine Mount
replacements to
Engine Gaskets and Seals
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1985 Buick Skyhawk at great prices.
Our Engine Parts inventory for this model
ranges from just $1.29 to $355.99, with
an average price of $43.27.
Our 68 Engine Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 1985 Buick Skyhawk without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Buick Skyhawk, we stock popular OEM and aftermarket Engine Parts from top names
like National, Dorman, Imperial, and more.
National Engine Parts
start at just $17.99 and boast an impressive 4.3 stars average rating from customers.
Dorman and Imperial also bring quality to the table, with Engine Parts available starting at $5.99, and at an average 4.2 stars rating.
With 177 customer reviews and counting, our 1985 Buick Skyhawk Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 Buick Skyhawk is always ready to roll. We’re committed to providing you with everything you need to keep your Skyhawk in top shape, all in one place.
Start shopping confidently below for your 1985 Buick Skyhawk!
Best-Selling Engine Mounts for 1985 Buick Skyhawks
Enhance the driving experience in your Buick with 4 quality Engine Mount components, starting at $2.49.
Anchor – Engine Mount: Front Right, 1 Piece (Part No.2610)
from
$35.99
Anchor 2610 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1994
- Weight approx: 3 Lbs
Anchor – Torque Strut Motor Mount: Rear, Front, 1 Piece (Part No.2528)
from
$8.99
Anchor 2528 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1982-1994
- Weight approx: 2 Lbs
Anchor – Engine Mount: Rear Right, 1 Piece (Part No.2477)
from
$12.49
Anchor 2477 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1982-1994
- Weight approx: 2 Lbs
Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.2492)
from
$2.49
Anchor 2492 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1982-1994
- Weight approx: 2 Lbs
Most Popular 1985 Buick Skyhawk Engine Gaskets and Seals
Customize your Buick with 5 Engine Gaskets and Seals products
like Valve Cover Gaskets,
Rear Main Seal Sets, and
Water Inlet Gaskets, all
priced under $52.99.
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40625)
from
$32.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Coolant Outlet Gasket (Part No.35258)
from
$4.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Shaft Repair Sleeve (Part No.99298)
from
$52.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Victor Reinz – RTV Silicone (Part No.70-31414-10)
from
$9.99
Product Features:
See More
- Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
- Insignificant shrinkage and loss of mass even in high-heat environments
- Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
- Sealing gap 0.006 in (0.15 mm)
Top Picks for 1985 Buick Skyhawk Valve Cover and Cylinder Heads
Upgrade Buick Skyhawks with top-quality Valve Cover and Cylinder Heads parts, including 3 OEM and aftermarket selections for your 1985 model.
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-216)
from
$1.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Dorman – Pipe Plug C.S. Hex 1/8-27 Npt x 5/16 In. (Sold by each) (Part No.090-046)
from
$2.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pipe Plug C.S. Square 1/4-18 NPT, Head Size 1/4 In. (Sold by each) (Part No.090-067)
from
$4.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
In-Demand Camshafts for 1985 Buick Skyhawks
Select from 5 premium Camshafts parts for your 1985 Buick Skyhawk, with prices ranging from $2.79 to $39.49.
Sealed Power – Engine Valve Lifter (Part No.HT-969)
from
$8.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Sealed Power – Engine Camshaft Bearing Set (Part No.1485M)
from
$39.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)
from
$6.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Driveworks – Crankshaft Seal (Part No.S-714436)
Most Sold 1985 Buick Skyhawk Engine Timing Parts
Explore our best-selling Buick parts for the 1985 Skyhawk among 8 OEM and aftermarket options starting from $15.99.
National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)
from
$18.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
National – Engine Harmonic Balancer Kit (Part No.5000)
from
$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Includes timing cover seal and harmonic balancer sleeve
- Solves the oil leaking around timing cover seal
- Made of stainless steel
- Takes up gaps caused by worn-out harmonic balancer shafts
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5115)
from
$32.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – Engine Timing Chain (Part No.C370)
from
$36.99
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Cloyes Gear – Engine Timing Set (Part No.C-3047K)
from
$28.99
Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S558T Engine Timing Camshaft Sprocket (1 EA), S549 Engine Timing Crankshaft Sprocket (1 EA), C370 Engine Timing Chain (1 EA).
Product Features:
See More
Product Features:
- Utilizes the latest in design and technology to offer complete chain sets
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Utilizes the latest in design and technology to offer complete chain sets
- Refer to our online catalog for detailed application-specific information
INA US – ENG TIMNG CHAINTNSNR (Part No.ZT-9-5115)
from
$42.99
ENG TIMNG CHAINTNSNR
Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S558T)
from
$18.99
Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S549)
from
$15.99
Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Top-Rated Engine Parts Brands For Your 1985 Buick Skyhawk
Shop for the best-rated brands offering Engine Parts and other products for your 1985 Buick Skyhawks. Below you’ll find some of our best rated Engine Parts from National, Dorman, and Imperial, and more. Engine Parts from these brands that fit a 1985 Skyhawk start at just $5.99 and are rated as high as 4.3 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1985 Buick Skyhawk Engine Parts
When it comes to maintaining or upgrading your 1985 Buick Skyhawk, using quality Engine Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Engine Parts, specifically designed for the 1985 Buick Skyhawk. With over 3 National brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $22.26. Plus, with over 25 customer reviews and an average rating of 4.3 stars, you can trust that our National Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$29.99
(5)
Multi-Purpose Seal
“This is the correct fit rear extension housing seal for my 1969 FMX transmission in my 1969 Mercury Cougar. Finding the seal with the bushing is a plu”
Popular Dorman 1985 Buick Skyhawk Engine Parts
Dorman auto parts is one of the highest quality Engine Part brands in the market. Any 1985 Buick Skyhawk owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1985 Skyhawk, Advance Auto Parts carries a full inventory of 3 Dorman Engine Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these Dorman Engine Parts range from $5.99 to $18.99, plus, with more than 7 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
from
$5.99
(1)
Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In
“Used these to replace a couple broken rivets in fan shroud, and they fit well and worked great.”
from
$9.49
(4)
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In.
“These are supposed to be a temporary fix, but I have had these installed in a 93 6.5l diesel 395cu engine going on roughly 4 to 5 years now. They are”
from
$18.99
(2)
Rubber Expansion Plug 1-3/8" – Size Range 1-3/8" – 1-1/2" (Sold by each)
“These worked great for making a skidoo secondary clutch tool.”
FAQs for 1985 Buick Skyhawk Engine Parts
Which Engine Parts are best-sellers for 1985 Buick Skyhawks?
Out of 68 Engine Parts that fit 1985 Buick Skyhawks, the following parts are the top sellers:
- Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (5701295) – $9.49
- Engine Valve Lifter (5688736) – $8.99
- Steel Cup Expansion Plug 34.3mm, Height 0.497 (3492699) – $1.29
What’s the price range for 1985 Buick Skyhawk Engine Parts?
Engine Part prices for the 1985 Buick Skyhawk start at $1.29 and go up to $355.99 for the most premium parts.
What’s the average price of a Engine Part for a 1985 Buick Skyhawk?
The average price for Engine Parts for the 1985 Buick Skyhawk is $43.27. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Buick Skyhawk model years?
What are the cheapest Engine Parts for my 1985 Buick Skyhawk?
The cheapest 1985 Buick Skyhawk Engine Parts we carry in stock are:
- Steel Cup Expansion Plug 34.3mm, Height 0.497 (3492699) – $1.29
- Engine Valve Spring Retainer Keeper (19694163) – $1.49
- Steel Cup Expansion Plug 34.3mm, Height 0.497 (Sold by each) (16140166) – $1.79
- Steel Cup Expansion Plug 42.3mm, Height 0.500 (Sold by each) (16140169) – $1.79
- Stock Replacement Oil Pump Shaft Guide (3716619) – $1.99
What are the top-rated Engine Parts that fit the 1985 Buick Skyhawk?
Out of 177 reviews by customers, our 1985 Buick Skyhawk Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1985 Buick Skyhawk and their top-rated products:
- Valve Cover and Cylinder Heads
- Engine Valve Spring Retainer Keeper (19694163) – $1.49
- Engine Internals
- Engine Valve Spring Retainer Keeper (19694163) – $1.49
- Engine Gaskets and Seals
- Engine Valve Spring Retainer Keeper (19694163) – $1.49
What types of Engine Parts do you sell for my 1985 Buick Skyhawk?
As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1985 Buick Skyhawk:
Can I get help with 1985 Buick Skyhawk Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Engine Parts and more.
What is your return policy for Buick Skyhawk Engine Parts?
Advance Auto Parts keeps returns simple. For new Buick Skyhawk Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
