1985 BMW 524TD Oil and Lubricants
More 1985 BMW 524TD Oil and Lubricants Categories
If you’re looking for an original Oil and Lubricants replacement for a 1985 BMW 524TD, you can search through our selection below. You’ll also find aftermarket and OEM Oil and Lubricants to meet your needs.
Essential 1985 BMW 524TD Oil and Lubricants
FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart (Part No.F670)
from
$6.49
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Sludge Cleanup: Formulated to help clean out sludge buildup, keeping engines running clean and with increased efficiency and power.
- Versatile Compatibility: Suitable for gasoline and light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Industry Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
Valvoline – Premium Blue Extreme Heavy Duty Full Synthetic 5W-40 Engine Oil: For Diesel Engines, 1 Gallon (Part No.774038)
from
$34.99
When it comes to heavy-duty diesel and gasoline engines, freezing temperatures and hot weather operations call for a motor oil engineered for the extreme. Valvoline Premium Blue Extreme SAE 5W-40 Full Synthetic Engine Oil is designed for severe conditions and service. It provides performance, protection and advanced fuel economy (up to 1.5% over 15W-40 conventional oils in on-highway operation) in modern emissions treatment equipped diesel engines, including those with Exhaust Gas Recirculation (EGR) and Diesel Particulate Filters (DPF). Our superior synthetic base stocks and additive technology resists oxidation, deposits, corrosion and wear better than industry standards. No wonder it’s The Only One exclusively endorsed and recommended by Cummins for both on road and off highway applications. It’s specially formulated for faster and safer cold starts and has enhanced thermal properties for high temperatures during hot weather to help ensure year-round performance. Plus, extended drain intervals reduce oil changes so your engine can work longer between downtime.
Product Features:
See More
Product Features:
- EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
- RESISTS OXIDATION AND FIGHTS DEPOSITS & SLUDGE with higher quality synthetic base oils and special inhibitors
- PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
- ADVANCED FUEL ECONOMY up to 1.5% over 15W-40 conventional oils in on-highway operations
- UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins X15/X12 engines when average is 7mpg or higher
FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)
from
$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control – 1 Qt (Part No.F620)
from
$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
Valvoline – Premium Blue One Solution GEN2 Conventional 15W-40 Engine Oil: Endorsed by Cummins, 1 Gallon (Part No.773780)
from
$24.99
When the going gets tough, the tough get Valvoline Premium Blue. This premium heavy duty engine oil features proprietary One Solution GEN2 Technology designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications. Our patented, formula is engineered to outperform: resisting oxidation, deposits, corrosion and wear better than industry standards. No wonder it’s The Only One exclusively endorsed and recommended by Cummins for both on road and off highway applications. It’s specially formulated for faster and safer cold starts and has enhanced thermal properties for hot weather operations to help ensure year-round performance. Plus, extended drain intervals reduce oil changes so your engine can work longer between downtime.
Product Features:
See More
Product Features:
- EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
- RESISTS OXIDATION AND FIGHTS DEPOSITS with high quality base oils and special inhibitors
- PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
- PROPRIETARY ONE SOLUTION GEN2 TECHNOLOGY designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications
- UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins X15/X12 engines when average is 7mpg or higher
FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)
from
$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Engine Oil 1 Quart (Part No.154BC4)
from
$12.49
CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1-quart container.
Product Features:
See More
Product Features:
- Optimized to deliver 40% better performance than required by acea standards
- Recommended by world leading auto manufacturers
- Engine protection for the entire drain interval even under extreme pressure of high output engines
- Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
- Formerly known as castrol slx
- Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.
Castrol – EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil, 1 Liter (Part No.15A4E6)
from
$15.99
Castrol EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil is for drivers who demand maximum engine performance. This advanced full synthetic oil with Fluid Titanium Technology transforms to be strongest when engine pressure is most severe, reducing power-robbing friction across engine speeds and conditions. Recommended by world-leading car manufacturers, it meets or exceeds industry standards such as API CF/SN and ACEA A3/B4, and is approved for BMW M-models and VW 501 01/505 00. Trusted to perform in high-performance vehicles like the Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Ferrari F12 Berlinetta, and Koenigsegg engines, it is the ultimate engine oil to unlock exhilarating performance with every drive.
Product Features:
See More
Product Features:
- Transforms to be stongest when engine pressure is most severe
- Reduces power robbing friction across engine speeds and conditions
- Recommended by world leading car manufacturers
- Meets API CF/SN, ACEA A3/B4, Approved for BMW M-models, VW 501 01/505 00
- MEETS OR EXCEEDS INDUSTRY STANDARDS: ACEA A3/B3, A3/B4; API SN/CF; Approved for VW 501 01/ 505 00
- TRUSTED TO PERFORM: Approved for BMW M-Models, Approved for use in Koenigsegg engines, Suitable for use in Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Bugatti Veyron, Ferrari F12 Berlinetta, Ferrari FF, and Koenigsegg engines.
- Full Synthetic Composition: Provides superior protection and performance with a 10W-60 SAE oil weight, ideal for demanding driving conditions.
Febi – 02582 grease (for input shaft) 90g (Part No.K600164873FEB)
from
$6.75
Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.
Product Features:
See More
Product Features:
- Original Febi spare parts
- Proven OE: Febi fulfills all eligibility requirements
- High driving comfort through the use of perfectly matched materials and impeccable design
Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)
from
$22.93
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:
Product Features:
See More
Product Features:
- Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
- Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
- Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
- DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
Popular 1985 BMW 524TD Oil and Lubricants Categories
1985 BMW 524TD Oil and Lubricants
You count on your 1985 BMW 524TD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 29 Oil and Lubricants ranging in price from $6.49 to $37.99, you’re sure to find everything you need for your 1985 BMW 524TD.
Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 5 different brands like Fram, Castrol, and Valvoline. 1985 BMW 524TD Oil and Lubricants start as low as $6.49!
One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 167 extensive product reviews on 1985 BMW 524TD Oil and Lubricants. Some of the top-rated Oil and Lubricants products we carry are Premium Blue Extreme Heavy Duty Full Synthetic 5W-40 Engine Oil: For Diesel Engines, 1 Gallon with 5.0 stars.
Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 1985 BMW 524TD below to get started!
Top-Rated Oil and Lubricants Brands For Your 1985 BMW 524TD
Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 BMW 524TD running right for years to come. In our inventory you’ll find brands like Fram, Castrol, Valvoline, and even more.
Popular Castrol Oil and Lubricants
You’ll find popular Castrol brand products across Motor Oil. All are waiting to get your 1985 BMW 524TD back on the road. Some of the top-rated Castrol products in these categories are:
Top-Rated Castrol Oil and Lubricants
If Castrol are what you’re looking for, our inventory holds plenty. We stock Castrol brand Oil and Lubricants for your 1985 BMW 524TD, and some of our most reviewed Castrol parts include:
FAQs for 1985 BMW 524TD Oil and Lubricants
What are the most purchased Oil and Lubricants for the 1985 BMW 524TD?
Out of 29 Oil and Lubricants for the 1985 BMW 524TD, the most popular in our inventory are:
from
$27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil
from
$25.99
This product is not rated
5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control
Engine Oil
from
$28.99
This product is not rated
Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart
Engine Oil
What are the top-rated 1985 BMW 524TD Oil and Lubricants?
Top-rated Oil and Lubricants for your 1985 BMW 524TD based on customer reviews/ratings are:
from
$34.99
(29)
Premium Blue Extreme Heavy Duty Full Synthetic 5W-40 Engine Oil: For Diesel Engines, 1 Gallon
“Having a truck it’s such a high maintenance and for that you need to go quality bin. Valvoline Premium Blue Heavy duty has the best value for the mone”
