1984 Mazda 626 Ignition Coils and Boots
More 1984 Mazda 626 Ignition Coils and Boots
Find your specific 1984 Mazda 626 original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1984 Mazda 626 Ignition Coils and Boots
Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)
from
$77.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
Product Features:
See More
Product Features:
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Fd-478
- MSD 5527
- Standard Motor Products SMP Fd-478
- MSD 5527
- Resists Shock And Vibration
- Resists Corrosion
Delphi – Ignition Coil (Part No.GN10348)
from
$123.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48806)
from
$98.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1401)
from
$98.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBE1834)
from
$78.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1038)
from
$36.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
Driveworks – Ignition Coil (Part No.26324)
from
$89.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Delphi – Ignition Coil (Part No.GN10183)
from
$52.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Motorcraft – Central Ignition Coil (Part No.F3000344574MTR)
from
$294.08
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1051)
from
$83.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6100)
from
$109.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Delphi – Ignition Coil (Part No.GN10178)
from
$94.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Driveworks – Distributorless Coil (Part No.26266)
from
$72.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Intermotor Red Wire – Spark Plug Wire Set (Part No.51171)
from
$30.49
Spark Plug Wire Set
NGK – Spark Plug Wire Set (Part No.8158)
from
$178.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
DENSO – Spark Plug Wire Set: Carbon Core, 5 Wire Set (Part No.671-4012)
from
$63.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
NGK – Spark Plug Wire Set (Part No.9134)
from
$73.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
DENSO – Spark Plug Wire Set: Carbon Core, 5 Wire Set (Part No.671-4008)
from
$42.49
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
NGK – Spark Plug Wire Set (Part No.8163)
from
$218.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Popular 1984 Mazda 626 Ignition Coils and Boots Categories
1984 Mazda 626 Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1984 Mazda 626. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 3 different Ignition Coils and Boots in our inventory ranging from $29.99 to $63.99. That means you can find the exact parts or products you need to keep that 1984 Mazda 626 running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Mazda 626. Carquest Premium, Intermotor Red Wire, and DENSO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1984 Mazda 626, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1984 Mazda 626 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1984 Mazda 626 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Mazda 626 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your 626 the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
FAQs for 1984 Mazda 626 Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1984 Mazda 626?
Out of 3 Ignition Coils and Boots for the 1984 Mazda 626, the most popular in our inventory are:
from
$29.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
from
$63.99
This product is not rated
Spark Plug Wire Set: Carbon Core, 5 Wire Set
Ignition Coil Boots
