1984 Jeep J20 Performance Engines
More 1984 Jeep J20 Performance Engines
Find your specific 1984 Jeep J20 original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1984 Jeep J20 Performance Engines
Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)
from
$484.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer AMC; Intake Manifold (Part No.21311)
from
$592.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Not for Stock Motorcraft Spread Bore Carburetor
- Two Center Bolt Holes are Offset
Edelbrock – Performer AMC; Intake Manifold (Part No.37311)
from
$627.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)
from
$424.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Not for Stock Motorcraft Spread Bore Carburetor
- Two Center Bolt Holes are Offset
Omix – Cylinder Head Gasket (Part No.17446.04)
from
$28.99
Is your Jeep’s cylinder head gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement cylinder head gaskets that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Composite
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)
from
$171.99
The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit
Product Features:
See More
Product Features:
- Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
- Intake: 1.13″x2.21″ Port/.030″ Thick
- Exhaust: 1.80″x1.30″ Port
- 3/16″ Valve Cover
- Multi Piece Configuration
Omix – Cylinder Head Gasket (Part No.17446.07)
from
$26.49
Are your Jeep’s cylinder head gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement cylinder head gaskets that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Composite
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Timing Cover Oil Seal (Part No.17449.50)
from
$15.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Metal Outer Rubber Inner
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Edelbrock – Sure Seat; Valve Spring (Part No.5932)
from
$89.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Pushrod Set for AMC 343-401 (Part No.9637)
from
$206.99
Product Features:
See More
- Case-Hardened Tubing
- Surface Hardening
- Welded Ends
- 0.3125 in. Diameter
- Use with or without Hardened Steel Guideplates
Edelbrock – Performer-Plus Camshaft Kit for AMC 290-401 V8 (Part No.2132)
from
$353.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched To Performer Intakes PN[2131/3731]
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Water Pump AMC Long Style 1973-Later (Part No.8832)
from
$347.99
Edelbrock #8832 Water Pump AMC long style 1973-later ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pumps
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.1875 in. Block To Hub Height
- Satin Finish
Popular 1984 Jeep J20 Performance Engines Categories
1984 Jeep J20 Performance Engines
Maybe you’re in the middle of a full rebuild of that 1984 Jeep J20. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 12 different Performance Engines in our inventory ranging from $15.49 to $654.99. That means you can find the exact parts or products you need to keep that 1984 Jeep J20 running smoothly.
Performance Engines are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Jeep J20. Edelbrock and Omix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1984 Jeep J20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Engines to keep your 1984 Jeep J20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1984 Jeep J20 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Jeep J20 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your J20 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular Edelbrock Performance Engines
We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1984 Jeep J20, our most popular Edelbrock Performance Engines include:
from
$424.99
(1)
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
Performance Intake Manifolds
FAQs for 1984 Jeep J20 Performance Engines
What are the most purchased Performance Engines for the 1984 Jeep J20?
Out of 12 Performance Engines for the 1984 Jeep J20, the most popular in our inventory are:
from
$484.99
This product is not rated
Performer EGR AMC Intake Manifold
Performance Intake Manifolds
from
$171.99
This product is not rated
Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep
Performance Engine Cylinder Head Gaskets
from
$15.49
This product is not rated
Timing Cover Oil Seal
Performance Engine Timing Cover Gasket Sets
