1984 Dodge D100 Belts and Hoses

Name: Premium Molded Coolant Hose
Brand: Gates
SKU: 21406
Price: 31.99 USD

Below you will find various in-demand Dodge Belts and Hoses, components and accessories for your 1984 D100. Advance Auto Parts has popular D100 parts like Pulleys, Radiator Hoses, Oil Cooler Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other D100 model years including 1976, 1977, 1978, 1979, 1985, 1986, 1987, 1988, 1989 and more. Select a category of 1984 Dodge D100 Belts and Hoses below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1984 Dodge D100 Belts and Hoses Categories

Idler Pulleys

Engine Oil Cooler Hoses

Transmission Oil Cooler Hoses

Air Duct Hoses

Drive Belts

Essential Belts and Hoses for 1984 Dodge D100s

from

$31.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$15.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$3488.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$3207.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$12.79

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$31.99

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for better leak resistance
Their high flexibility makes installation easier
Maximum vehicle coverage with a minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$21.99

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$20.29

Provides greater durability and flexibility 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$16.99

Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$41.99

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Designed to resist electrochemical degradation, which is the primary cause of hose failure
Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
EPDM tube and neoprene cover for longer lifespan
The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
Resistant to heat, oil and ozone
Performs to SAE 20R5 Type EC Class D-2 specifications
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Caution: Do not use for fuel or oil transport applications.
Caution: Do not use for fuel or oil transfer applications.

from

$16.29

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$19.79

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$24.29

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Italy to the O.E. specified design and meets all performance and durability requirements. Heavy duty Steel V-belt pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$25.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

from

$3.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$24.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$15.99

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.49

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 1984 Dodge D100 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1984 Dodge D100, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Belts and Hoses are key to keeping your D100 functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Belts and Hoses for the 1984 Dodge D100, designed to meet your needs without breaking the bank. From Pulley replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1984 Dodge D100 at great prices. Our Belts and Hoses inventory for this model ranges from just $3.79 to $4,500.00, with an average price of $1,628.96. Our 26 Belts and Hoses in stock come from 7 trusted brands, so you’re sure to find the right part for your 1984 Dodge D100 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1984 Dodge D100, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Imperial, and more. Dayco Belts and Hoses start at just $22.99 and boast an impressive 4.5 stars average rating from customers. With 300 customer reviews and counting, our 1984 Dodge D100 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals and more to make sure your 1984 Dodge D100 is always ready to roll. We’re committed to providing you with everything you need to keep your D100 in top shape, all in one place. Start shopping confidently below for your 1984 Dodge D100!

Best-Selling Pulleys for 1984 Dodge D100s

Enhance the driving experience in your Dodge with 1 quality Pulley components, starting at $25.99.

show more show less

from

$25.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

Top Picks for 1984 Dodge D100 Oil Cooler Hoses

Upgrade Dodge D100s with top-quality Oil Cooler Hoses parts, including 2 OEM and aftermarket selections for your 1984 model.

show more show less

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

In-Demand Engine Cooling Hoses for 1984 Dodge D100s

Select from 3 premium Engine Cooling Hoses parts for your 1984 Dodge D100, with prices ranging from $15.99 to $35.99.

show more show less

from

$35.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$15.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$18.79

Improved sealing surface for better leak resistance
High flexibility for easy installation
Maximum vehicle coverage with a minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

Most Sold 1984 Dodge D100 Serpentine and V Belts

Explore our best-selling Dodge parts for the 1984 D100 among 11 OEM and aftermarket options starting from $32.99.

show more show less

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$41.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
Meets or exceeds SAE J636C specifications

Premium Mid-Mount Complete Accessory System

from

$4500.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

Premium Black Mid-Mount Complete Accessory System

from

$4500.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$4500.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$4444.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$3882.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$3657.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$3488.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$3207.00

Product Features:

Bracketless Accessory Mounting System for Ultra-Easy Assembly – Timing Cover is Integrated into this Bracket / Casting
Configurable Heater Hose Connection Options – for Hose Routing Flexibility
Holley Premium 150 Amp alternator – Plenty of Power for All Vehicle Systems
Easy Wiring of Alternator That Doesn’t Require Factory ECU to Excite Alternator
Alternator is Tucked in Tight to the Engine – Eliminates Frame Rail or Hood Clearance Issues (Common with Factory Car or Truck Drive Systems)
Holley Water Pump w/ Cartridge Design – Compact & Easy to Service Without Removing the Water Pump Housing / Timing Cover
SD7 A/C Compressor – Small Compact Compressor
Type II Power Steering Pump with Baffled Reservoir
Power Steering Pump Has Proper Pressure for use with Steering Box on Older Vehicles (Eliminates Steering Box Damage Due to Excessive Pressure)
Swivel Water Inlet & Outlet – Allows Custom Radiator Hose Routing
OE (Original Equipment) Pulley Ratios for Optimal Accessory Performance
No Adapters or Spacers Needed – for Easy Installation
Works with Common After-Market and Factory Throttle Bodies and Intakes
Choose from Kits in Natural Aluminum or Black Finish – Fits Naturally Aspirated Gen III Hemi Engines (5.7L, 6.1L, and 6.4L)
Includes OE Style Damper with Cast in Serpentine Pulley
All Accessories are Included; Water Pump, A/C Compressor, Alternator, Power Steering Pump w/ Reservoir, Pulleys & Crank Damper
All Plumbing Adapters, Wiring Adapters, Gaskets and Seals are Included
Available for VVT (Variable Valve Timing – 2009-Up 5.7L and 2011-Up 6.4L) and Non-VVT (2003-2008 5.7L, and 2005-2010 6.1L) Engines in Natural Cast Aluminum or Black Finish

from

$32.99

Product Features:

The fiber-reinforced rubber adds flexibility along the entire length of the belt and ensures greater lateral stability in the pulley.
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
Meets or exceeds SAE J636C specifications

Top-Rated Belts and Hoses Brands For Your 1984 Dodge D100

Shop for the best-rated brands offering Belts and Hoses and other products for your 1984 Dodge D100s. Below you’ll find some of our best rated Belts and Hoses from Dayco and Imperial, and more. Belts and Hoses from these brands that fit a 1984 D100 start at just $22.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1984 Dodge D100 Belts and Hoses

When it comes to maintaining or upgrading your 1984 Dodge D100, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1984 Dodge D100. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $22.99, with an average price of just $34.66. Plus, with over 9 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $35.99

(1)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter

“Great fit, easy install”

from $22.99

(1)

Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 1.75 Inch Inner Dia.

“In my 64 Ford it’s always good to have a backup item when on a long trip.”

from $44.99

(7)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, 1.75" Diameter

“As it should”

Popular Imperial 1984 Dodge D100 Belts and Hoses

Imperial auto parts is one of the highest quality Belts and Hose brands in the market. Any 1984 Dodge D100 owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1984 D100, Advance Auto Parts carries a full inventory of 1 Imperial Belts and Hoses. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Imperial Belts and Hoses range up to $32.49, plus, with more than 94 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $32.49

(94)

Transmission Oil Cooler Hose

“Great product make sure to get plate mount style other one is pain to mount”

FAQs for 1984 Dodge D100 Belts and Hoses

Which Belts and Hoses are best-sellers for 1984 Dodge D100s?

Out of 26 Belts and Hoses that fit 1984 Dodge D100s, the following parts are the top sellers:

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, 1.75" Diameter (5190290) – $44.99
Carburetor Pre-Heater Hose – 2 In. x 28 In. – Paper/ Aluminum (9110801) – $15.99
Engine Oil Cooler Hose (19230057) – $48.99

What’s the price range for 1984 Dodge D100 Belts and Hoses?

Belts and Hose prices for the 1984 Dodge D100 start at $3.79 and go up to $4,500.00 for the most premium parts.

What’s the average price of a Belts and Hose for a 1984 Dodge D100?

The average price for Belts and Hoses for the 1984 Dodge D100 is $1,628.96. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Dodge D100 model years?

Yes, we currently carry Belts and Hoses for 9 model years of Dodge D100s between 1975 and 1989. Belts and Hoses are bought most frequently for the following model years: 1989, 1988, 1987, 1986, 1985, 1979, 1978, 1977, and 1976.

What are the cheapest Belts and Hoses for my 1984 Dodge D100?

The cheapest 1984 Dodge D100 Belts and Hoses we carry in stock are:

Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505038) – $3.79
Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia. (5191106) – $15.99
Carburetor Pre-Heater Hose – 2 In. x 28 In. – Paper/ Aluminum (9110801) – $15.99
Vulco-Flex II Flexible Coolant Hose (10504689) – $18.79
Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 1.75 Inch Inner Dia. (5191173) – $22.99

What are the top-rated Belts and Hoses that fit the 1984 Dodge D100?

Out of 300 reviews by customers, our 1984 Dodge D100 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1984 Dodge D100 and their top-rated products:

Engine Cooling Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (5197368) – $35.99
- Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia. (5191106) – $15.99

What types of Belts and Hoses do you sell for my 1984 Dodge D100?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1984 Dodge D100:

Can I get help with 1984 Dodge D100 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Belts and Hoses and more.

What is your return policy for Dodge D100 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Dodge D100 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1984 Dodge D100 Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.21406)

Dayco – Flex Radiator Hoses; EPDM Rubber, 21.44 Inch Long, 1.5 Inch Inner Dia. (Part No.81492)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Holley – Black Mid-Mount Complete Accessory System (Part No.20-291BK)

Holley – Mid-Mount Complete Accessory System (Part No.20-291)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.56" Diameter (Part No.C70352)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25528)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Dayco – Bottom Cog V-Belt; 61 Inch Long, Exact Fit Premium Quality (Part No.15610)

Dayco – Bottom Cog V-Belt; 45.5 Inch Long, Exact Fit Premium Quality (Part No.15455)

Dayco – Bottom Cog V-Belt: 45.5" Long, Exact Fit Premium Quality (Part No.17455)

Yukon Gear – Seal Puller Tool (Part No.56063)

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26612)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25302)

Dayco – Flex Radiator Hoses; EPDM Rubber, 10.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81131)

Litens – Idler Pulley: Direct Fit, Steel, 109mm Diameter (Part No.900161A)

Litens – Idler Pulley: Direct Fit, Steel, 94.5mm Diameter (Part No.900051A)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.88" Long, 1" Diameter (Part No.A70637)

Dorman – Help – Carburetor Pre-Heater Hose – 2 In. x 28 In. – Paper/ Aluminum (Part No.96034)

Dorman – Help – Carburetor Pre-Heater Hose – 2 In. x 18 In. – Aluminum (Part No.96024)

Litens – Idler Pulley: Direct Fit, Steel, 94.5mm Diameter (Part No.900051A)

Dayco – Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 1.75 Inch Inner Dia. (Part No.81331)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, 1.75" Diameter (Part No.C70445)

Gates – Premium Molded Coolant Hose (Part No.20046)

Gates – Premium Molded Coolant Hose (Part No.21406)

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26502)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25482)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (Part No.E71167)

Dayco – Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia. (Part No.81191)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25478)

Yukon Gear – Seal Puller Tool (Part No.56063)

Gates – Automotive XL High Capacity V-Belt (Part No.7575)

Holley – Premium Mid-Mount Complete Accessory System (Part No.20-293)

Holley – Premium Black Mid-Mount Complete Accessory System (Part No.20-292BK)

Holley – Premium Black Mid-Mount Complete Accessory System (Part No.20-293BK)

Holley – Premium Mid-Mount Complete Accessory System (Part No.20-292)

Holley – Black Mid-Mount Complete Accessory System (Part No.20-290BK)

Holley – Mid-Mount Complete Accessory System (Part No.20-290)

Holley – Black Mid-Mount Complete Accessory System (Part No.20-291BK)

Holley – Mid-Mount Complete Accessory System (Part No.20-291)

Gates – Automotive XL High Capacity V-Belt (Part No.7570)