1984 Chevrolet S10 Performance and Racing Products

Name: Thermocap Radiator Cap
Brand: Mr. Gasket
SKU: 2470B
Price: 55.99 USD

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1984 S10. Advance Auto Parts has popular S10 parts like Performance Engines, Performance Ignition Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other S10 model years including 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and more. Select a category of 1984 Chevrolet S10 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1984 Chevrolet S10 Performance and Racing Products Categories

Performance Starters

Performance Intake Manifolds

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Transmission Dipstick Tubes

Performance Body Mounts

Performance Engine and Transmission Mounts

Performance Radiator Caps

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Differential Covers

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Posi Units and Components

Performance Leaf Spring Bushings

Performance Upper Performance Control Arm Bushings

Performance Chassis Bump Stops

Performance Engine Rocker Arms

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Sway Bar Bushings

Performance Differential Carrier Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Clutch Forks

Performance Engine Push Rods

Performance Brake Hose Kits

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Transmission Rebuild Kits

Essential Performance and Racing Products for 1984 Chevrolet S10s

from

$55.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$32.99

Product Features:

Made of Superior Hyper-Flex+ Material

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$49.99

Designed for use with round stick shifters. Complete with chrome ID plate and mounting hardware. Measures: 4-3/8 in. x 5-3/8 in. with 3 pleats.

Product Features:

Complete with Mounting Hardware
Adapt To Most Shifter Install
Hurst Quality
Works Well with Round Shift Levers
Chrome ID Plate

from

$123.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$76.99

The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.

Product Features:

Chrome plated steel for looks
Includes bolts and gasket

from

$170.99

Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Product Features:

Thicker Than Stock Steel Plate
Ring Gear Securely Welded
Dual Bolt Patterns
Zinc-Dichromate Plated To Resist Corrosion
Withstands High Torque and RPM

from

$511.99

A B&M transmission in a box! Transform your automatic transmission into a full-tilt B&M performer! This is our ultimate transmission kit – it comes complete with full instructions on how to assemble your transmission to B&M specifications.

Product Features:

High Perf. Friction Materials
Complete Overhaul Gasket Set
Modification Components
Replacement Valves
Replacement Springs
Drain Plug Kit Included

from

$18.29

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$24.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
No exhaust crossover openings or blocking shields
Embossed steel core laminate w/coating
Not intended for use in emission controlled vehicles.

from

$88.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$139.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$53.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$91.99

Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.

Product Features:

Braided Stainless Steel
Firewall Mounting
Includes Oil Fill Tube

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$94.99

Replacement Clutch Fork-GM

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$54.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$191.99

RngPnn

from

$124.99

MiniSpool

from

$51.99

Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.

Product Features:

Designed to prevent starter overheat due to extreme exhaust temperature
Heat resistant material sandwiched between 2 aluminum plates
Protects Starter From High Temperatures
Made Of 2 Sheets Of Aluminum Heat Resistant Center
Natural Finish

from

$282.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Includes Everything Needed
Resistance High Dielectric Strength Compounds
Race Proven
Improved Performance
Reduced Emissions

from

$32.88

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

Upgrade your 1984 Chevrolet S10 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1984 Chevrolet S10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your S10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 88 Performance and Racing Products for the 1984 Chevrolet S10, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1984 Chevrolet S10 at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $921.99, with an average price of $228.39. Our 88 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1984 Chevrolet S10 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1984 Chevrolet S10, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, B & M, Accel, and more. Energy Suspension Performance and Racing Products start at just $5.99 and boast an impressive 4.4 stars average rating from customers. B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $102.99, and at an average 4.1 stars rating. With 289 customer reviews and counting, our 1984 Chevrolet S10 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1984 Chevrolet S10 is always ready to roll. We’re committed to providing you with everything you need to keep your S10 in top shape, all in one place. Start shopping confidently below for your 1984 Chevrolet S10!

Best-Selling Performance Engines for 1984 Chevrolet S10s

Enhance the driving experience in your Chevrolet with 15 quality Performance Engine components, starting at $8.99.

show more show less

from

$459.99

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
No exhaust crossover openings or blocking shields
Embossed steel core laminate w/coating
Not intended for use in emission controlled vehicles.

from

$921.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6

from

$746.99

High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6

High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L

from

$531.99

High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L

from

$483.99

Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$216.99

Product Features:

Matching Top For Edelbrock Base Intake PN[3785]
Designed for Standard Flange 4-barrel Carburetor
Contains Necessary Linkage And Bracketry
Match With Edelbrock Valve Covers Pn[4488]

from

$57.99

Engine Valve Spring Kit

High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12

from

$45.99

High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12

from

$31.99

ENGINE ROCKER ARM

from

$24.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$19.29

ENGINE ROCKER ARM

7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring

from

$10.99

7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring

from

$9.99

Engine Valve Spring

High Energy 6.165" Long, 5/16" Diameter Pushrod

from

$8.99

High Energy 6.165" Long, 5/16" Diameter Pushrod

Most Popular 1984 Chevrolet S10 Performance Ignition Products

Customize your Chevrolet with 5 Performance Ignition Products products like Performance Coils and Performance Ignition Parts, all priced under $204.99.

show more show less

from

$102.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Dr-31
MSD 8225

from

$95.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$126.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$55.99

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

Improved output coil for electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Alkyd tower w/high dielectric properties lessens carbon tracking

from

$204.99

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Top Picks for 1984 Chevrolet S10 Performance Exhaust Products

Upgrade Chevrolet S10s with top-quality Performance Exhaust Products parts, including 2 OEM and aftermarket selections for your 1984 model.

show more show less

from

$139.99

from

$173.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

In-Demand Performance Distributors for 1984 Chevrolet S10s

Select from 2 premium Performance Distributors parts for your 1984 Chevrolet S10, with prices ranging from $17.49 to $32.88.

show more show less

from

$17.49

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer

from

$32.88

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

Most Sold 1984 Chevrolet S10 Performance Steering Products

Explore our best-selling Chevrolet parts for the 1984 S10 among 9 OEM and aftermarket options starting from $5.99.

show more show less

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$150.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$116.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$51.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$53.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.49

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.49

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

Top-Rated Performance and Racing Products Brands For Your 1984 Chevrolet S10

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1984 Chevrolet S10s. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1984 S10 start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Energy Suspension 1984 Chevrolet S10 Performance and Racing Products

When it comes to maintaining or upgrading your 1984 Chevrolet S10, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1984 Chevrolet S10. With over 3 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $21.59. Plus, with over 22 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $46.49

(17)

High Performance Transmission Mount for Street & Racing Vehicles

“The best you can buy. Don’t be a cheap skate. Spend a little extra and get the good stuff. I used in 72′ chevy C-10. Has been restrored has 425 hp wit”

from $5.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

from $12.29

(2)

Control Arm Bump Stop Set

“good quality part”

Popular B & M 1984 Chevrolet S10 Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1984 Chevrolet S10 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1984 S10, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these B & M Performance and Racing Products range from $349.99 to $539.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $371.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

from $349.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

FAQs for 1984 Chevrolet S10 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1984 Chevrolet S10s?

Out of 88 Performance and Racing Products that fit 1984 Chevrolet S10s, the following parts are the top sellers:

Tie Rod Dust Boot (17360833) – $5.99
High Energy Ignition Coil for GM HEI – 1973-1991 (6900054) – $102.99
Starter Motor Heat Shield (17360071) – $51.99

What’s the price range for 1984 Chevrolet S10 Performance and Racing Products?

Performance and Racing Product prices for the 1984 Chevrolet S10 start at $5.99 and go up to $921.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1984 Chevrolet S10?

The average price for Performance and Racing Products for the 1984 Chevrolet S10 is $228.39. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet S10 model years?

Yes, we currently carry Performance and Racing Products for 20 model years of Chevrolet S10s between 1982 and 2003. Performance and Racing Products are bought most frequently for the following model years: 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, and 1995.

What are the cheapest Performance and Racing Products for my 1984 Chevrolet S10?

The cheapest 1984 Chevrolet S10 Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
High Energy 6.165" Long, 5/16" Diameter Pushrod (50289328) – $8.99
Engine Valve Spring (50286657) – $9.99

What are the top-rated Performance and Racing Products that fit the 1984 Chevrolet S10?

Out of 289 reviews by customers, our 1984 Chevrolet S10 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1984 Chevrolet S10 and their top-rated products:

Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
Performance Shifters
- Thermocap Radiator Cap (6900022) – $53.99

What types of Performance and Racing Products do you sell for my 1984 Chevrolet S10?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1984 Chevrolet S10:

Can I get help with 1984 Chevrolet S10 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet S10 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet S10 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1984 Chevrolet S10 Performance and Racing Products

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Energy Suspension – Differential Carrier Bracket Bushing Set (Part No.3.1105G)

Mallory – Unilite Ignition Module (Part No.605)

Hurst – B-1 Shifter Boot and Plate (Part No.1147336)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2142G)

Mr. Gasket – Differential Cover Kit (Part No.9896)

Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)

B & M – Transkit For 65-87 TH400 Transmission (Part No.20229)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

Energy Suspension – Control Arm Bushing Set (Part No.3.3119R)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)

Mr. Gasket – A/Tdipstick (Part No.9704G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Lakewood – Replacement Clutch Fork-GM (Part No.15500)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5207G)

Richmond Gear – RngPnn (Part No.GM75342TK)

Richmond Gear – MiniSpool (Part No.78-7526-1)

Mr. Gasket – Starter Motor Heat Shield (Part No.3678)

Accel – Tst GM 96-01 4.3L Vortech (Part No.TST1)

Accel – Distributor Cap And Rotor Kit (Part No.8130)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6 (Part No.K16-233-4)

Competition Cams – High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L (Part No.CL16-115-4)

B & M – Tork Master 2400 (Part No.70418)

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Competition Cams – Engine Valve Spring Kit (Part No.980-12)

Competition Cams – High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12 (Part No.7816-12)

Competition Cams – ENGINE ROCKER ARM (Part No.1413-1)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

Competition Cams – ENGINE ROCKER ARM (Part No.1216-1)

Competition Cams – 7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-1)

Competition Cams – Engine Valve Spring (Part No.980-1)

Competition Cams – High Energy 6.165" Long, 5/16" Diameter Pushrod (Part No.7816-1)

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

Mallory – Unilite Ignition Module (Part No.605)

Accel – GM Hei Supercoil Red/White (Part No.140005)

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)

Accel – Ignition/Electrical (Part No.130120)

Accel – Distributor Cap And Rotor Kit (Part No.8130)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Energy Suspension – Body Cab Mount Set (Part No.3.4131G)

Energy Suspension – Body Cab Mount Set (Part No.3.4130R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5190R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5158R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5121R)