1984 Chevrolet P30 Belts and Hoses

Name: Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.50" Diameter
Brand: Dayco
SKU: E70751
Price: 12.49 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand Chevrolet Belts and Hoses, components and accessories for your 1984 P30. Advance Auto Parts has popular P30 parts like Fuel Hoses, Serpentine and V Belts, Oil Cooler Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other P30 model years including 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 and more. Select a category of 1984 Chevrolet P30 Belts and Hoses below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1984 Chevrolet P30 Belts and Hoses Categories

Engine Oil Cooler Hoses

Upper Radiator Hoses

Lower Radiator Hoses

Fuel Injection Return Hoses

Coolant Hoses

By-Pass Hoses

Fuel Injector Fuel Return Hoses

Seal Pullers

V-Belts

Transmission Oil Cooler Hoses

Air Duct Hoses

Drive Belts

Essential Belts and Hoses for 1984 Chevrolet P30s

from

$12.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$14.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$30.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$37.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Warning: Do not use for fuel or oil transfer applications

from

$20.99

GM Genuine Parts Fuel Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$41.99

This complete kit includes necessary components to replace the fuel injector return lines and copper gaskets on the fuel injectors.

Product Features:

Includes fuel return line
Includes 8 fuel injector copper combustion seals
Includes 2 caps
Includes 2 clamps
Includes 2 plenum gaskets
Premium OE quality materials

from

$16.29

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$28.99

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$2250.00

Product Features:

The Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives.
Bracketless accessory mounting with ultra-easy assembly
O-ring seal to engine
Hidden thermostat bypass and heater hose ports with NPT line adapters included
LT1 style premium alternator
LT1 style water pump design
Compact SD7 A/C compressor with line adapter included
Type II power steering pump with baffled reservoir
P/S adapter hardline to AN -6 adapter included
OE pulley ratios for optimal accessory performance
Available in natural and black finishes
Billet alternator, tensioner, and compressor pulley covers

from

$492.99

Product Features:

Cast aluminum construction for even gasket sealing and high quality details
Tall M/T valve covers for BBC applications allow for generous aftermarket rocker and some applications of stud girdle clearance
Precision manufactured with knock-out plugs for stock PCV (smog control) and oil fill installations
Includes baffle plates (with mounting screws) and a period correct twist-on oil fill cap
Deep heat dissipating fins
Top cover surface retains vintage style nameplate pad for custom engraving
Available in three classic finishes: natural cast, polished, and satin black with machined fins/logo

from

$6.99

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$44.99

This fuel hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat and vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$25.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$44.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

from

$28.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$7.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$10.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$15.79

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$14.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

Upgrade your 1984 Chevrolet P30 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1984 Chevrolet P30, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your P30 functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Belts and Hoses for the 1984 Chevrolet P30, designed to meet your needs without breaking the bank. From Fuel Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1984 Chevrolet P30 at great prices. Our Belts and Hoses inventory for this model ranges from just $3.79 to $165.99, with an average price of $27.68. Our 55 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 1984 Chevrolet P30 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1984 Chevrolet P30, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Driveworks, Dorman, and more. Dayco Belts and Hoses start at just $16.79 and boast an impressive 4.5 stars average rating from customers. Driveworks and Dorman also bring quality to the table, with Belts and Hoses available starting at $5.49, and at an average 4.2 stars rating. With 482 customer reviews and counting, our 1984 Chevrolet P30 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1984 Chevrolet P30 is always ready to roll. We’re committed to providing you with everything you need to keep your P30 in top shape, all in one place. Start shopping confidently below for your 1984 Chevrolet P30!

Best-Selling Fuel Hoses for 1984 Chevrolet P30s

Enhance the driving experience in your Chevrolet with 2 quality Fuel Hose components, starting at $41.99.

show more show less

from

$44.99

This fuel hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat and vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

This complete kit includes necessary components to replace the fuel injector return lines and copper gaskets on the fuel injectors.

Product Features:

Includes fuel return line
Includes 8 fuel injector copper combustion seals
Includes 2 caps
Includes 2 clamps
Includes 2 plenum gaskets
Premium OE quality materials

Most Popular 1984 Chevrolet P30 Serpentine and V Belts

Customize your Chevrolet with 28 Serpentine and V Belts products like V-Belts, Drive Belts, and Seal Pullers, all priced under $165.99.

show more show less

from

$16.79

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$20.29

Provides greater durability and flexibility 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$21.29

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$20.29

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$36.99

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$5.79

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$5.49

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$5.49

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$16.29

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$21.29

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$24.49

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$5.49

Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:

Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
No-Noise Advanced Design EPDM rubber compound for quiet extended life

from

$32.99

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$165.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

High Output Fuel Flow
Flows 110 gph Free Flow
Shutoff Pressure Pre-Set From 6.5 To 8 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT
Inlet/Outlet Tapped For 3/8 in. NPT

from

$25.49

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$5.49

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$5.29

Engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:

Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys.
No-Noise Advanced Design EPDM rubber compound for quiet extended life

from

$16.29

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$21.99

Provides greater durability and flexibility 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$24.99

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

Top Picks for 1984 Chevrolet P30 Oil Cooler Hoses

Upgrade Chevrolet P30s with top-quality Oil Cooler Hoses parts, including 2 OEM and aftermarket selections for your 1984 model.

show more show less

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

In-Demand Engine Cooling Hoses for 1984 Chevrolet P30s

Select from 9 premium Engine Cooling Hoses parts for your 1984 Chevrolet P30, with prices ranging from $18.99 to $51.99.

show more show less

from

$44.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$51.99

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil, and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$28.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$47.99

Improved sealing surface for greater leak resistance
Their high flexibility makes installation easier
Maximum vehicle coverage with minimal inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 Degrees F (+125 Degrees C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$41.99

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimal inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 Degrees F (+125 Degrees C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$29.99

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with a minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$26.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Warning: Do not use for fuel or oil transfer applications

from

$25.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$18.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transport applications.

Most Sold 1984 Chevrolet P30 Radiator Hoses

Explore our best-selling Chevrolet parts for the 1984 P30 among 12 OEM and aftermarket options starting from $3.79.

show more show less

from

$14.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$29.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$25.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specifically designed to resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Warning: Do not use for fuel or oil transfer applications

from

$17.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$13.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$13.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$23.79

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$37.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$28.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$11.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$3.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures over prolonged periods, which extends the service life.
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$3.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

Top-Rated Belts and Hoses Brands For Your 1984 Chevrolet P30

Shop for the best-rated brands offering Belts and Hoses and other products for your 1984 Chevrolet P30s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Driveworks, and Dorman, and more. Belts and Hoses from these brands that fit a 1984 P30 start at just $5.49 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1984 Chevrolet P30 Belts and Hoses

When it comes to maintaining or upgrading your 1984 Chevrolet P30, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1984 Chevrolet P30. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $16.79, with an average price of just $19.46. Plus, with over 7 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.79

(5)

Bottom Cog V-Belt; 44 Inch Long, Exact Fit Premium Quality

“After about 11 yrs, I decided to replace all the belts, as I did when I bought the ’88 Cadillac in ’02, because dry rot cracks were visible and some o”

from $20.29

(1)

Bottom Cog V-Belt; 45.5 Inch Long, Exact Fit Premium Quality

“Fits. Good price.”

from $21.29

(1)

Bottom Cog V-Belt; 46 Inch Long, Exact Fit Premium Quality

“Good”

Popular Driveworks 1984 Chevrolet P30 Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1984 Chevrolet P30 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1984 P30, Advance Auto Parts carries a full inventory of 3 Driveworks Belts and Hoses. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $5.49 to $5.79, plus, with more than 11 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $5.49

(1)

Automotive V-Belt, Driveworks

“Works well. Good Fit”

from $5.79

(8)

Automotive V-Belt, Driveworks

“Perfect O.E replacement”

from $5.49

(2)

Automotive V-Belt, Driveworks

“Good belt”

FAQs for 1984 Chevrolet P30 Belts and Hoses

Which Belts and Hoses are best-sellers for 1984 Chevrolet P30s?

Out of 55 Belts and Hoses that fit 1984 Chevrolet P30s, the following parts are the top sellers:

Bottom Cog V-Belt; 44.5 Inch Long, Exact Fit Premium Quality (3300047) – $32.99
Bottom Cog V-Belt; 44 Inch Long, Exact Fit Premium Quality (3300046) – $16.79
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.50" Diameter (5191920) – $29.99

What’s the price range for 1984 Chevrolet P30 Belts and Hoses?

Belts and Hose prices for the 1984 Chevrolet P30 start at $3.79 and go up to $165.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1984 Chevrolet P30?

The average price for Belts and Hoses for the 1984 Chevrolet P30 is $27.68. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet P30 model years?

Yes, we currently carry Belts and Hoses for 25 model years of Chevrolet P30s between 1968 and 1999. Belts and Hoses are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, and 1991.

What are the cheapest Belts and Hoses for my 1984 Chevrolet P30?

The cheapest 1984 Chevrolet P30 Belts and Hoses we carry in stock are:

Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505038) – $3.79
Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505007) – $3.99
Automotive V-Belt, Driveworks (5060753) – $4.99
Automotive V-Belt, Driveworks (5060419) – $4.99
Automotive V-Belt, Driveworks (5060451) – $4.99

What are the top-rated Belts and Hoses that fit the 1984 Chevrolet P30?

Out of 482 reviews by customers, our 1984 Chevrolet P30 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1984 Chevrolet P30 and their top-rated products:

Engine Cooling Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.25" Diameter (5193087) – $44.99
Radiator Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.25" Diameter (5193087) – $44.99
Serpentine and V Belts
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.25" Diameter (5193087) – $44.99

What types of Belts and Hoses do you sell for my 1984 Chevrolet P30?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1984 Chevrolet P30:

Can I get help with 1984 Chevrolet P30 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet P30 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet P30 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1984 Chevrolet P30 Belts and Hoses

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.50" Diameter (Part No.E70751)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia. (Part No.81261)

Gates – Premium Molded Coolant Hose (Part No.21941)

Gates – Molded Heater Hose: EPDM, Direct Fit, 1.5" Inside Diameter (Part No.20686)

GM Genuine Parts – Fuel Injection Fuel Return Hose (Part No.14066305)

Carquest Premium – Fuel Injector Return Hose Kit (Part No.AL001)

Dayco – Bottom Cog V-Belt; 40 Inch Long, Exact Fit Premium Quality (Part No.15400)

Dayco – Bottom Cog V-Belt; 53 Inch Long, Exact Fit Premium Quality (Part No.15530)

Holley – Big Block Chevy Mid-Mount Complete Accessory System (Part No.20-242)

Holley – Tall M/T Valve Covers for Big Block Chevy Engines – Natural Cast Finish (Part No.241-150)

Dorman – Help – Carburetor Pre-Heater Hose – 1-1/2 In. x 18 In. – Aluminum (Part No.96020)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Dorman – Diesel Fuel Injection Return Hose and Clamps (Part No.904-101)

Gates – Premium Molded Coolant Hose (Part No.20542)

Gates – Premium Molded Coolant Hose (Part No.21191)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.50" Diameter (Part No.E70935)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Gates – Premium Molded Coolant Hose (Part No.20925)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, 1" Diameter (Part No.B72060)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, 1.25" Diameter (Part No.A70562)

Gates – Premium Molded Coolant Hose (Part No.20563)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 7 Inch Length (Part No.88387)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dorman – Diesel Fuel Injection Return Hose and Clamps (Part No.904-101)

Carquest Premium – Fuel Injector Return Hose Kit (Part No.AL001)

Dayco – Bottom Cog V-Belt; 44 Inch Long, Exact Fit Premium Quality (Part No.15440)

Dayco – Bottom Cog V-Belt; 45.5 Inch Long, Exact Fit Premium Quality (Part No.15455)

Dayco – Bottom Cog V-Belt; 46 Inch Long, Exact Fit Premium Quality (Part No.15460)

Dayco – Bottom Cog V-Belt; 47 Inch Long, Exact Fit Premium Quality (Part No.15470)

Dayco – Bottom Cog V-Belt; 60.5 Inch Long, Exact Fit Premium Quality (Part No.15605)

Driveworks – Automotive V-Belt, Driveworks (Part No.39515)

Driveworks – Automotive V-Belt, Driveworks (Part No.48013)

Driveworks – Automotive V-Belt, Driveworks (Part No.46013)

Driveworks – Automotive V-Belt, Driveworks (Part No.49013)

Driveworks – Automotive V-Belt, Driveworks (Part No.60515)

Driveworks – Automotive V-Belt, Driveworks (Part No.49515)

Dayco – Bottom Cog V-Belt; 39.5 Inch Long, Exact Fit Premium Quality (Part No.15395)

Dayco – V-Belt, Top Cog, Dayco (Part No.15480)

Dayco – V-Belt, Top Cog, Dayco (Part No.15465)

Driveworks – Automotive V-Belt, Driveworks (Part No.44515)

Dayco – Bottom Cog V-Belt; 44.5 Inch Long, Exact Fit Premium Quality (Part No.15445)

Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)

Dayco – Bottom Cog V-Belt; 49.5 Inch Long, Exact Fit Premium Quality (Part No.15495)

Driveworks – Automotive V-Belt, Driveworks (Part No.44013)

Driveworks – Automotive V-Belt: 47.07 Outer Circumference, 46.5 Effective Length, 0.44 Top Width (Part No.46513)

Dayco – Bottom Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality (Part No.15490)

Dayco – V-Belt, Top Cog, Dayco (Part No.15600)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – V-Belt, Top Cog, Dayco (Part No.15630)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.25" Diameter (Part No.E71036)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25535)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.75" Diameter (Part No.E71551)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25307)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25530)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25532)

Gates – Premium Molded Coolant Hose (Part No.21201)

Gates – Premium Molded Coolant Hose (Part No.21191)

Gates – Premium Molded Coolant Hose (Part No.20841)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia. (Part No.81261)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.50" Diameter (Part No.E70735)

Gates – Premium Molded Coolant Hose (Part No.21442)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.88" Long, 1.50" Diameter (Part No.E71430)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.25" Diameter (Part No.E71035)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.50" Diameter (Part No.D71017)

Gates – Premium Molded Coolant Hose (Part No.20843)

Gates – Premium Molded Coolant Hose (Part No.21441)

Gates – Premium Molded Coolant Hose (Part No.20925)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.50" Long, .63" Diameter (Part No.A70785)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)