1984 Chevrolet K20 Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 1984 K20. Advance Auto Parts has popular K20 parts like Engine Timing Parts, Camshafts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other K20 model years including 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1985, 1986 and more. Select a category of 1984 Chevrolet K20 Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1984 Chevrolet K20 Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Oil Cooler Gasket Sets

Gasket Kit Sets

Oil Pans

Cylinder Head Gaskets

Engine Camshaft Bolts

Engine Mounting Bolts

Engine Oil Pump Pickup Tube and Screens

Timing Cover Repair Sleeves

Valve Cover Load Spreaders

Main Bearing Repair Sleeves

Power Take Off Shaft Seal

Engine Valve Stem Seals

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Oil Pump Kits

Standard Piston Rings

Freeze Plug – Block Kits

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Camshaft Plugs

Engine Valves

Engine Timing Tapes

Standard Single Pistons

Camshaft Thrust Plate and Bearings

Camshaft Followers

Rocker Arm Bolts

Fuel Pump Gaskets

Engine Oil Pump Bushing

Engine Valve Locks

Camshaft Thrust Buttons

Engine Rocker Arm Balls

Engine Valve Seats

Remanufactured Engines

Cylinder Heads

Engine Valve Spring Seat

Engine Cylinder Head Nuts

Engine Timing Cover Bolt Sets

Engine Oil Deep Sump Kits

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Camshaft Bushings

Engine Bolt Kits

Engine Oil Pan Baffles

Engine Oil Pump Guide Bushings

Engine Oil Pump Screen Mounting Kit

Valve Train Set Up Spring Set

Engine Timing Cover Repair Sleeve Kit

Essential Engine Parts for 1984 Chevrolet K20s

from

$40.99

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:

Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
Bolt Kits Come With Washers
Stud Kits Come Complete With A Special Locking
Easily Installed Without The Worry Of Cross-Threading

from

$12.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$25.99

Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.

Product Features:

Extra Heavy-Duty Shaft That Will Provide The Necessary Reliability
Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
Alignment Sleeve Is Roll Formed Onto The Shaft (not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
Black Oxide

from

$13.99

This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$36.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$215.99

This Mr. Gasket Deluxe Engine Bolt Kit includes chrome plated grade 5 hex head fasteners with AN type washers for the following: Intake Manifold, Timing Cover, Oil Pan, Fuel Pump, Water Neck, Long Water Pump and Headers. The AN washers have no exposed shoulder which offers a professional appearance.

Product Features:

Chrome plated
Grade 5
AN washers with no exposed shoulder for a professional appearance

from

$42.49

Made In USA. Melling offers a replacement oil pump drive gear for several Jeep and GM applications. This gear should be replaced should the original gear show ware or be damaged or lost during the rebuilding process.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$72.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Steel backed micro Babbitt lining material
Used in automotive and high-performance, Babbitt is designed to deform under extreme loads with o damaging other engine parts.
Fatigue life of cam bearings are nearly doubled
Ensures dependable performance and superior service life
Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
Application-specific design for perfect fit and correct operation

from

$114.99

Replace your stock black engine pulleys with a pair of chrome plated steel pulleys from Mr. Gasket. The pulleys are highly polished then chrome plated. Designed for small and big block Chevrolet engines with 5/8 inch water pump shaft.

Product Features:

Highly Polished For Lasting Beauty

from

$3.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$109.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$51.99

Eliminate any chance of rusted out freeze plugs with a Mr. Gasket Brass Freeze Plug Kit. Though designed for marine applications, kits are for long-term stored vehicles as well as every day street use. Kit includes all plugs needed for a complete engine. Fits Chevrolet big block.

Product Features:

Eliminates Rusted Plugs
Designed For Marine Use
Ideal For Every Day Use
Ideal For Long-Term Storage
Includes All Plugs

from

$2.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.99

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
100% USA Made
Meets or exceeds OEM performance requirements
Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

from

$15.49

This is a high quality bolt set that is made of grade 8 steel and will meet your requirements for a quality bolt set, this set will work on original equipment, high performance street, drag or circle track applications.

Product Features:

Has A Zinc Dichromate Finish
Made Of High Quality Grade 8 Steel
Has A Tall Hex Head To Prevent Wrench Slipping Off
Extra Thick Parallel Ground Washer
Washer Provides More Accurate And Uniform Torque

from

$43.49

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$1.99

Made In USA. Several Melling oil pump applications require the use of an oil pump shaft guide. Melling provides high quality shaft guides for specific pump applications. An oil pump shaft guide is necessary to connect the oil pump drive shaft to the intermediate drive shaft. Melling recommends installing a new oil pump shaft guide when it is needed.

Product Features:

Manufactured from high quality nylon for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$487.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Standard height valve cover with pre-installed internal oil baffles
Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

from

$14.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$6.99

Melling always suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Melling offers an oil pump screen mounting kit for the 10552ST and 10555ST series high performance pumps. The oil pump screen mounting kit contains everything needed for a fast, easy and quality screen installation including the tool and hardware needed to complete the installation.

from

$100.99

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

Valve Spring Retainers for Use OE Cast Iron Heads
Superior Quality Heat-Treated Steel
Machined for Strength with Black Oxide Finish
Finish Ensures Rust and Corrosion Protection

from

$42.99

A new Melling high performance pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed high performance oil pump pick-up tube/screen be a part of every oil pump installation when a higher quality oil pump screen is required. Melling high performance oil pump pick-up tubes/screens are manufactured with stronger welds and in some cases designed with additional reinforced mountings, include mounting bolts and are supplied with protective coatings.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineered for maximum fit and function
Designed for long-life and worry-free performance
Phosphate coated for rust protection
Includes screen mounting gasket

from

$29.99

The Edelbrock #4414 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Product Features:

Not For Center Bolt Covers
Steel Material
For Big-Block Chevy
Chrome Finish
Set of 7

from

$28.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$53.99

The FAG repair sleeve is a precision element that provides additional sealing for damaged shafts. Made of heat-treated stainless steel, the FAG repair sleeve signifcantly increases the life of the shaft and prevents premature wear. Since no shaft removal or machining is required during the repair, the repair sleeve is a cost effective repair solution to protect damaged surfaces.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$321.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$26.99

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$30.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Upgrade your 1984 Chevrolet K20 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1984 Chevrolet K20, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your K20 functioning at its best. At Advance Auto Parts, we offer a wide selection of 674 Engine Parts for the 1984 Chevrolet K20, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1984 Chevrolet K20 at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $5,984.99, with an average price of $313.12. Our 674 Engine Parts in stock come from 29 trusted brands, so you’re sure to find the right part for your 1984 Chevrolet K20 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1984 Chevrolet K20, we stock popular OEM and aftermarket Engine Parts from top names like Melling, National, Sealed Power, and more. Melling Engine Parts start at just $21.99 and boast an impressive 4.3 stars average rating from customers. National and Sealed Power also bring quality to the table, with Engine Parts available starting at $0.43, and at an average 4.3 stars rating. With 1,158 customer reviews and counting, our 1984 Chevrolet K20 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1984 Chevrolet K20 is always ready to roll. We’re committed to providing you with everything you need to keep your K20 in top shape, all in one place. Start shopping confidently below for your 1984 Chevrolet K20!

Best-Selling Engine Timing Parts for 1984 Chevrolet K20s

Enhance the driving experience in your Chevrolet with 105 quality Engine Timing Part components, starting at $8.49.

show more show less

from

$18.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$15.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$39.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
50 State Street Legal
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$45.49

Mr. Gasket Timing Cover Kit is the finishing touch to dressing up your engine. This kit is for use with original equipment style timing chains only. Double roller type chains or gear drives require checking for adequate clearance. This kit includes everything you need, including the timing cover, bolts, front oil pan seal, front seal and water pump gaskets.

Product Features:

Fits Chevy Small Block 1955-1995
For Use With OEM Style Timing Chain Only
Chrome Plated Steel

from

$66.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$31.49

Timing Set includes all components for a quick and efficient replacement.

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$22.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$27.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S390T Engine Timing Camshaft Sprocket (1 EA), S391 Engine Timing Crankshaft Sprocket (1 EA), C499 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$44.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: C163 Engine Timing Chain (1 EA), S289 Engine Timing Crankshaft Sprocket (1 EA), S288 Engine Timing Camshaft Sprocket (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$42.49

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$36.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: C163 Engine Timing Chain (1 EA), S289 Engine Timing Crankshaft Sprocket (1 EA), S288 Engine Timing Camshaft Sprocket (1 EA).

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$12.79

Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover.

Product Features:

Bolts on with existing timing cover bolts
Chrome plated steel is a much better compliment for chrome timing covers
Balancer

from

$49.99

Steel Cam Sprocket. Heat-Treated Crank Sprocket With Three Keyways. True Roller Chain With .250 Diameter. 100% USA.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$61.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$25.99

Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:

6 3¿4″ diameter
6 3┐4″ diameter
305, 350 cu. in. 1969-93
Increased Performance
Set Valve Lash At Proper Time

from

$19.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$34.99

Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:

Stamped Steel Material
Comes W/ Front Crankshaft Seal Installed
W/ Welded Reinforcement Plate
Chrome Finish
Ideal For Preventing Camshaft Walk When Used W/ Thrust Button

from

$15.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$12.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$11.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$138.99

Billet Crank Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$99.99

Billet Camshaft Sprocket for Superior Street Performance. Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 100% USA Made

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$102.99

Billet Camshaft Sprocket for Superior Street Performance. Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Bronze Thrust Washer to Minimize Block Thrust Surface Friction. 100% USA Made

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

Most Popular 1984 Chevrolet K20 Camshafts

Customize your Chevrolet with 150 Camshafts products like Camshaft Followers, Camshaft Plugs, and Camshaft Bearings, all priced under $1,745.99.

show more show less

from

$13.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.49

Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:

Black oxide finished steel
Includes (3) grade 5 bolts & locking plate
Fits Chevrolet Small and Big Block without OE roller cam
Tabs bend up around bolt head to secure

from

$49.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$549.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$74.99

If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.

Product Features:

Contains all the gaskets needed to change out your camshaft
Fuel Injector O-Ring Not Included
Meets Performance Standards

from

$3.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$72.99

Steel backed micro Babbitt lining material
Used in automotive and high-performance, Babbitt is designed to deform under extreme loads with o damaging other engine parts.
Fatigue life of cam bearings are nearly doubled
Ensures dependable performance and superior service life
Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
Application-specific design for perfect fit and correct operation

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$226.99

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.

Product Features:

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.
262/270 Advertised Duration, 218/224 Duration @ .050″, .462″/.469″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$254.99

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.

Product Features:

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
270/270 Advertised Duration, 224/224 Duration @ .050″, .470″/.470″ Lift, 110 Lobe Separation
Valve spring upgrade required
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$549.99

HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.

Product Features:

HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
288/294 Advertised Duration, 236/242 Duration @ .050″, .520″/.540″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$30.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$57.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$60.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$1745.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

Xtreme 4x4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block

from

$1712.00

Xtreme 4×4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block

Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block

from

$1712.00

Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1152.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

Top Picks for 1984 Chevrolet K20 Engine Gaskets and Seals

Upgrade Chevrolet K20s with top-quality Engine Gaskets and Seals parts, including 36 OEM and aftermarket selections for your 1984 model.

show more show less

from

$26.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$2.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$30.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevrolet 262,265,267,283,307,327,350,400 Gen I Small Block with Perimeter Bolt Valve Covers.

Product Features:

Provides Excellent Flange Sealing And Durability
For High-perf. Street Drag Race Oval Track

from

$19.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$22.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to help ensure a consistent and long-life seal
PRECISE DESIGN – Engineered to work with the embossed cover and pan flanges
PREVENTS OVERTIGHTENING – Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$12.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$44.99

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are an extra thick .312 inch which can help with valvetrain clearance.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
An extra thick .312″ which can help with valvetrain clearance

from

$42.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier for durability, precise alignment and fit
SUPERIOR SEAL – Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas
EASIER TO INSTALL – One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors
INSTALLATION AID – SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$20.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$47.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$16.99

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$37.99

Product Features:

Valve Cover Gasket

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$43.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .312 inch thick. That’s substantially thicker than stock which can allow for additional valve train clearance. brbrFits Chevrolet 262,265,267,283,307,327,350,400 Gen I Small Block with Perimeter Bolt Valve Covers.

Product Features:

Provides Excellent Flange Sealing And Durability
For High-Performance Street, Drag Race & Oval Track Use

from

$77.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$32.49

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick

from

$199.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

In-Demand Engine Mounts for 1984 Chevrolet K20s

Select from 8 premium Engine Mounts parts for your 1984 Chevrolet K20, with prices ranging from $5.99 to $166.99.

show more show less

from

$13.49

Anchor 2292 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-2005
Weight approx: 3 Lbs
Product: Made In The Usa
Design: Clamshell
Part Group: 2292, 2292

from

$5.99

This engine mount bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.49

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$12.99

Anchor 2395 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1972-1997
Weight approx: 4 Lbs
Product: Made In The Usa
Design: Clamshell
Part Group: 2395, 2395

from

$43.49

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$116.99

Product Features:

Re-Engineered to Handle High Horsepower
Outlasts Rubber
Virtually Indestructible

from

$166.99

Product Features:

Re-Engineered to Handle High Horsepower
Outlasts Rubber
Virtually Indestructible

from

$29.99

Product Features:

Can be used for a variety of GM vehicle applications and LS/LT swaps that utilize the common 2292 aftermarket mounts
Heavy duty 11-gauge steel construction is over 50% thicker than common aftermarket mounts
Dowels allow halves to be easily aligned
No need to drill rivets from existing shell
Durable powder coated finish
For use with Hooker BlackHeart Polyurethane Inserts – P/N’s 71221014HKR (Black) or 71221015HKR (Red) – Sold Separately
Sold individually (Consisting of one upper and one lower plate, Two required per vehicle)

Most Sold 1984 Chevrolet K20 Valve Cover and Cylinder Heads

Explore our best-selling Chevrolet parts for the 1984 K20 among 175 OEM and aftermarket options starting from $0.43.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$64.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$217.99

These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

Product Features:

Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
For applications with less than 350 lbs. of open spring pressure
Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
Ultimate street roller rocker arm designed for serious performance enthusiasts

from

$1041.00

Product Features:

Out-of-the-Box Bolt-On Performance
With Straight Plugs
70cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$936.99

Product Features:

64cc combustion chamber with 200cc intake runner
2.02 in. intake and 1.60 in. exhaust valves
Flat Tappet Camshaft Type
Exhaust And Intake 45 Degree Seat Angle
Sold as one complete head

from

$572.99

COMP Cams Pro Magnum Hydraulic Lifters are specifically designed to perform at higher engine speeds. When engines are equipped with conventional hydraulic lifters, high RPM is limited by improper positioning of the internal piston. Pro Magnum Lifters eliminate improper positioning and harmful “pumping up.” COMP Cams Pro Magnum Hydraulic Lifters offer a significant power increase over standard high performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used. An adjustable valve train is required to use Pro Magnum Hydraulic Lifters.

Product Features:

.842″ diameter; 99g weight; 1.93″ seat height
Specifically designed to perform at higher engine speeds with significant power increase over standard hydraulic lifters
Proper position of internal piston at higher rpm prevents lifters form harmful “pumping up”
Adjustable valve train required
Pre-load lifters .002″-.004″ with engine warm

from

$433.99

The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series Al

Product Features:

Precision-sorted trunnion bearings withstand valve spring pressure up to 700 lbs.
CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
Increase engine power, enhance valve train stability and improve oiling
Designed for high performance street and race engines
Arced channel & contoured top give the rockers the best strength to weight ratio possible

from

$2.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$3.29

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$18.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:

Fits Chevy V8
Standard Y Top 1/4 In-20 X 5/8 in L
Chrome Plated Steel
Overall Length: 4.64″
Installed Length: 4.00″
Pack of 4

from

$56.99

The Edelbrock #4449 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Chevy 262-400 1959-86
Short
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$35.99

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Manufactured for the repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$3.49

Complete rocker arm assembly
1 Arm
1 Ball
1 Nut
Utilizes ISO & QS certified manufacturing

from

$117.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$21.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$11.99

Retro-fit performance
High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
Eliminates frequent lash adjustments
Significant friction reduction substantially increases horsepower and fuel economy
Delivers quieter engine operation
Application-specific design for perfect fit and correct operation

from

$42.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$0.65

from

$22.99

Product Features:

Not For Center Bolt Covers
Steel Material
For Small-Block Chevy
Chrome Finish
Set of 4

from

$69.99

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$4.99

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

from

$55.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

Top-Rated Engine Parts Brands For Your 1984 Chevrolet K20

Shop for the best-rated brands offering Engine Parts and other products for your 1984 Chevrolet K20s. Below you’ll find some of our best rated Engine Parts from Melling, National, and Sealed Power, and more. Engine Parts from these brands that fit a 1984 K20 start at just $0.43 and are rated as high as 4.3 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Melling 1984 Chevrolet K20 Engine Parts

When it comes to maintaining or upgrading your 1984 Chevrolet K20, using quality Engine Parts is essential to ensure durability and a perfect fit. Melling ticks all of those boxes. We offer a wide selection of Melling Engine Parts, specifically designed for the 1984 Chevrolet K20. With over 3 Melling brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.99, with an average price of just $29.99. Plus, with over 31 customer reviews and an average rating of 4.3 stars, you can trust that our Melling Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $43.99

(13)

Stock Replacement OE Type Oil Pump

“Easy to install”

from $23.99

(11)

Stock Replacement Oil Pump Screen

“Fit ad it should”

from $21.99

(7)

Stock Replacement Type Oil Pump Intermediate Shaft

“After checking several sources Advance Auto hadthe best value.”

Popular National 1984 Chevrolet K20 Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1984 Chevrolet K20 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1984 K20, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these National Engine Parts range from $15.99 to $36.49, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $36.49

(1)

Shaft Repair Sleeve

“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”

from $15.99

(1)

Multi-Purpose Seal

“I used this seal to replace the leaking front crankshaft seal on a high performance 454 big block Chevy engine. It fit and installed without any issue”

from $18.79

(5)

Engine Harmonic Balancer Repair Sleeve

“Simple device. Durable. Easy to install”

FAQs for 1984 Chevrolet K20 Engine Parts

Which Engine Parts are best-sellers for 1984 Chevrolet K20s?

Out of 674 Engine Parts that fit 1984 Chevrolet K20s, the following parts are the top sellers:

Engine Valve Lifter (5688698) – $13.99
Engine Push Rod (5687063) – $3.29
TIMING COVER GASKET SET (5783267) – $20.99

What’s the price range for 1984 Chevrolet K20 Engine Parts?

Engine Part prices for the 1984 Chevrolet K20 start at $0.43 and go up to $5,984.99 for the most premium parts.

What’s the average price of a Engine Part for a 1984 Chevrolet K20?

The average price for Engine Parts for the 1984 Chevrolet K20 is $313.12. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet K20 model years?

Yes, we currently carry Engine Parts for 10 model years of Chevrolet K20s between 1975 and 1986. Engine Parts are bought most frequently for the following model years: 1986, 1985, 1983, 1982, 1981, 1980, 1979, 1978, and 1977.

What are the cheapest Engine Parts for my 1984 Chevrolet K20?

The cheapest 1984 Chevrolet K20 Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Rocker Arm Ball (19694261) – $0.65
Steel Cup Expansion Plug 41.5mm, Height 0.536 (Sold by each) (16140156) – $1.79
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Sold by each) (16140188) – $1.99
Stock Replacement Oil Pump Shaft Guide (3716619) – $1.99

What are the top-rated Engine Parts that fit the 1984 Chevrolet K20?

Out of 1,158 reviews by customers, our 1984 Chevrolet K20 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1984 Chevrolet K20 and their top-rated products:

Engine Kits
- Engine Gasket Set (5781426) – $65.99
- Ultra Seal: Oil Pan Stud Kit (17360387) – $54.99
Engine Gaskets and Seals
- Engine Gasket Set (5781426) – $65.99
- Ultra Seal: Oil Pan Stud Kit (17360387) – $54.99
Valve Cover and Cylinder Heads
- Engine Gasket Set (5781426) – $65.99
- Ultra Seal: Oil Pan Stud Kit (17360387) – $54.99

What types of Engine Parts do you sell for my 1984 Chevrolet K20?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1984 Chevrolet K20:

Can I get help with 1984 Chevrolet K20 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet K20 Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet K20 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1984 Chevrolet K20 Engine Parts

ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S289)

ARP Auto Racing – For Use With Chevy Big Block, 8740 Steel, 190000 Psi (Part No.135-7901)

Dorman – Rubber Expansion Plug 1-5/8" – Size Range 1-5/8" – 1-3/4" (Sold by each) (Part No.570-010)

Felpro – Engine Conversion Gasket Set (Part No.CS 8006-2)

Mr. Gasket – Complete Engine Bolt Kit (Part No.5001)

Melling – Stock Replacement Oil Pump Drive Gear (Part No.DG-62C)

Sealed Power – Camshaft Bearing Set (Part No.2100M)

Mr. Gasket – Chrome Plated Steel Crankshaft Pulley (Part No.4978)

Felpro – Engine Oil Pump Shaft Retainer (Part No.72665)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Mr. Gasket – Brass Freeze Plug Kit (Part No.6482)

Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)

Cloyes Performance – Engine Camshaft Bushing (Part No.P9005)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.945G)

Energy Suspension – Motor Mount (Part No.3.1116R)

Melling – Stock Replacement Oil Pump Shaft Guide (Part No.M-55024)

Holley – Valve Covers – Muscle Series – Finned – SBC – Satin Black Machined (Part No.241-135)

Sealed Power – Engine Valve Lifter (Part No.HT-2148)

Melling Select Performance – Oil Pump Screen Mounting Kit (Part No.M-55085)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)

Melling Select Performance – High Performance Replacement Bolt On Oil Pump Screen (Part No.12559)

Edelbrock – Hold-Down Tab Kits for Big-Block Chevy 5" long (Qty 7) (Part No.4414)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S524)

Schaeffler – Repair Sleeve (Part No.SR3506)

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9354 PT-1)

Felpro – Severe Duty Engine Cylinder Head Gasket (Part No.522 SD)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

National – Multi-Purpose Seal (Part No.3945)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7802)

Mr. Gasket – Timing Cover (Part No.4590)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7800)

Cloyes Performance – Engine Timing Set (Part No.C-3023X)

Cloyes Gear – Engine Timing Chain (Part No.C499)

National – Engine Harmonic Balancer Kit (Part No.5000)

Cloyes Gear – Engine Timing Set (Part No.C-3001K)

Cloyes Gear – Engine Timing Set (Part No.C-3023K)

Dorman – Timing Cover with Gasket and Seal (Part No.635-510)

Cloyes Performance – Engine Timing Set (Part No.C-3023SP)

Mr. Gasket – Timing Tab (Part No.4600)

Cloyes Performance – Engine Timing Set (Part No.9-1100SP)

Cloyes Gear – Engine Timing Chain (Part No.C181)

Mr. Gasket – Precision Timing Tape (Part No.1588)

Cloyes Performance – High Performance Timing Chain (Part No.9-145)

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S289)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S390T)

Cloyes Performance – High Performance Timing Set (Part No.9-3100)

Cloyes Performance – High Performance Timing Set (Part No.9-3500TX9)

Cloyes Performance – High Performance Timing Set (Part No.9-3500WX9)

Sealed Power – Engine Valve Lifter (Part No.HT-817)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.362657.1)

Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)

Sealed Power – Engine Camshaft Bearing Set (Part No.1749M)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam (Part No.12-422-8)

Mr. Gasket – Cam Change Gaskets (Part No.4406)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M)

Sealed Power – Camshaft Bearing Set (Part No.2100M)

Dorman – Steel Cup Expansion Plug 2-7/64 In., Height 0.310 (sold by each) (Part No.555-080)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.12-238-2)

Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.12-211-2)

Competition Cams – Camshaft, Sbc 288 Xtreme Energy Hyd Roller 1 Ea (Part No.12-433-8)

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M 1)

Dorman – Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each) (Part No.555-085)

Sealed Power – Engine Camshaft Bearing Set (Part No.1496M)

Sealed Power – Engine Camshaft Bearing Set (Part No.1750M)

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam K-Kit (Part No.K12-600-8)

Competition Cams – Xtreme 4×4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block (Part No.CL12-411-8)

Competition Cams – Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-432-8)

Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-433-8)

Competition Cams – Xtreme Energy 206/212 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-408-8)

Competition Cams – Magnum 244/244 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-460-8)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 12869 R)

Felpro – Fuel Pump Mounting Gasket (Part No.5182)

Mr. Gasket – High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (Part No.175)