1984 Chevrolet K20 Differentials

Essential 1984 Chevrolet K20 Differentials

Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

Differential Cover Gasket

from

$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Pinion Install Kit For ’97 & Down GM 9.5" Differential (Part No.13075)

Pinion Install Kit For '97 & Down GM 9.5" Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1997 and down GM 9.5″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

14T Pinion Gear Thrust Washer

from

$8.99
14T pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – 8.5 Front Cover Gasket (Part No.23021)

8.5 Front Cover Gasket

from

$11.99
8.5 front cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 8.5″ front
See More

Yukon Gear – Minor Install Kit For GM 8.5" Front Differential (Part No.12056)

Minor Install Kit For GM 8.5" Front Differential

from

$92.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)

Product Features:
  • Fits GM 8.5″ front
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Standard Open Spider Gear Kit For 8.5" GM With 30 Spline Axles (Part No.16055)

Standard Open Spider Gear Kit For 8.5" GM With 30 Spline Axles

from

$207.99
Yukon standard open spider gear kit for 8.5″ GM with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 8.5″ open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Pro-King – Shim Kit (Part No.741A200)

Shim Kit

from

$19.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)

Tapered Roller Bearing

from

$13.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style (Part No.41180)

Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style

from

$299.99
Yukon yoke for GM 10.5″ 14 bolt truck, 1410, strap style. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 30 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

SKF – Wheel Bearing (Part No.K8000205983SKF)

Wheel Bearing

from

$60.23
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Yukon Gear – 1541H Replacement Right Hand Assembly For Dana 44 With 30 Splines (Part No.21061)

1541H Replacement Right Hand Assembly For Dana 44 With 30 Splines

from

$662.99
Yukon 1541H replacement right hand assembly for Dana 44 with 30 splines. The inner axle measures 18.5 inches and the axle measures 28.4 inches overall. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a one year warranty against manufacturing defects.

Product Features:
  • 30 spline inner, 19 spline outer
  • 28.4″ long
  • Fits Dana Spicer 44 in 1969-1980 GM 1/2 ton
  • Right hand assembly
  • 5-760X U-joint size
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55075)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Dana 44 Grizzly Locker Replacement (Part No.28001)

Dana 44 Grizzly Locker Replacement

from

$998.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Eaton Positraction Shim Kit For 9.5" GM (Part No.16059)

Eaton Positraction Shim Kit For 9.5" GM

from

$47.99
Eaton positraction shim kit for 9.5″ GM.

Product Features:
  • Shim kit
  • Fits GM 9.5″ Eaton positraction
See More

Beck/Arnley – Wheel Bearing (Part No.051-3936)

Wheel Bearing

from

$27.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • ABS magnet included if applicable
  • Made with high quality materials
  • Quality construction for durability
  • Application specific for this vehicle
See More

Motive Gear – Differential Gear Install Kit (Part No.D44IK)

Differential Gear Install Kit

from

$61.99


Product Features:
  • MINI INSTALL KIT DANA 44
See More

Yukon Gear – Differential (Part No.29101)

Differential

from

$271.99
Differential

Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM

from

$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

Product Features:
  • Axle Redi-sleeve
  • Fits Dana Spicer 44
See More

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

DiffrlPinSupportBolt

from

$5.99
DiffrlPinSupportBolt

Yukon Gear – Steel Spool For GM 8.5" & 8.6" With 30 Spline Axles (Part No.32193)

Steel Spool For GM 8.5" & 8.6" With 30 Spline Axles

from

$414.99
Yukon Performance 1-3/4″ deck steel spool for 8.5″ GM with 30 spline axles. Uses large bearings, 1.785 journals. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects. This spool requires the use of a C-Clip eliminator kit to be used.

Product Features:
  • Fits GM 8.5″ with 30 spline axles
  • 2.73 and up ratios only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Bearing Race Driver (Part No.56015)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88610 race
  • All steel construction
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

Super Carrier Shim Kit For GM 9.5"

from

$29.99
9.5″ GM differential carrier Supershim kit.

Product Features:
  • Super carrier shim kit for GM 9.5″
  • Interlocking design makes installation much easier
See More

Richmond Gear – RngPnn (Part No.49-0280-1)

RngPnn

from

$344.99
RngPnn

National – Shaft Repair Sleeve (Part No.99155)

Shaft Repair Sleeve

from

$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Motive Gear – Crush Sleeve (Part No.1234726)

Crush Sleeve

from

$4.29
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

1984 Chevrolet K20 Differentials

Maybe you’re in the middle of a full rebuild of that 1984 Chevrolet K20. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 301 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1984 Chevrolet K20 running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Chevrolet K20. Valvoline, FELPRO, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1984 Chevrolet K20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,575 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 1984 Chevrolet K20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1984 Chevrolet K20 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Chevrolet K20 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K20 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Spectre Differentials

We carry Spectre parts in our stock across Differential Covers categories, plus more. For a 1984 Chevrolet K20, our most popular Spectre Differentials include:
Differential Cover
from $59.99
(1)
Differential Cover
Differential Covers

Top 1984 Chevrolet K20 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1984 Chevrolet K20. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1984 Chevrolet K20 Differentials

What are the most purchased Differentials for the 1984 Chevrolet K20?

Out of 301 Differentials for the 1984 Chevrolet K20, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings

What are the top-rated 1984 Chevrolet K20 Differentials?

Top-rated Differentials for your 1984 Chevrolet K20 based on customer reviews/ratings are:
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Bearings
from $23.99
(7)
Bearings
“Good price”
Differential Master Bearing Kit - Koyo
from $156.99
(5)
Differential Master Bearing Kit – Koyo
“was delivered as promised and on time”