1984 Chevrolet Camaro Performance Distributors

Leave it to MSD to build an all-out performance distributor to replace the OEM GM LT1 Optispark. We machine an entire billet block of aluminum down into a precise housing that fits in place of the factory piece. Then, we fill it with a reliable new pick-up assembly, a trick timing adjustment mechanism and top it off with an all new MSD distributor cap. The pick-up is an advanced optical encoder, a different style of optical pickup than the OEM. This type of pick-up has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft and is stabilized through the use of a large ball bearing assembly. Once installed, you have the ability to adjust the ignition timing. The only distributor that offers timing adjustability. An adjustment screw allows the timing to be tweaked up to 5 degrees. The distributor is equipped with a fresh air vent and has an extra thick mounting surface for the cap to eliminate leaks. The distributor is supplied complete with our heavy duty LT1 cap, rotor and the components required for installation.

Product Features:

• Advanced optical encoder trigger design for accuracy/reliability.
• Rotor drive design is positively indexed and cannot slip.
• Large ball bearing stabilizes timing through 10;000 rpm.
• Improved housing design and extra bolt eliminates leaks
• Easily Adjust The Timing Up To +/-5 deg.

The unique design of these distributors fit tight intake systems while still transferring the high voltage of the MSD racing ignition to the spark plugs. The high voltage carrying capabilities are the result of several features which have been designed into these low-profile distributors. This includes a large diameter cap with wide spaced terminals and an injection molded Rynite rotor with thick vanes to stir up the air inside the cap. The high dielectric Rynite base also prevents arcing to the billet housing. Since these distributors are used primarily in racing applications, an oversized steel shaft is responsible for delivering the sparks. This shaft is QPQ coated for friction reduction and receives guidance from a sealed ball-bearing assembly and an extra long, precision sintered bushing for smooth operation. Note: must be used with an MSD crank trigger and ignition control.

Product Features:

• Designed to fit low in the block to clear firewall/intake combos
• Supplied w/Bronze Gear
• Supplied w/Large Diameter HEI Style Distributor Cap And Rotor
• Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear
• QPQ coated polished steel shaft; guided by sealed ball bearings
• Oversized Polished Steel Shaft w/QPQ Coating

Introducing the Street Fire value-line brand of MSD Ignition. Street Fire components offer a quality designed alternative to the bottom bargain parts that are springing up all over. We’re so assured with the quality of our new Street Fire HEI distributor that we provide a one year warranty with it! We know the importance of a centrifugal advance in a distributor so our engineers made sure that the Street Fire receive an advance assembly with coated weights and welded weight pins (Not just pressed in like other models). Another area that you cannot afford to scrimp on is with a distributor gear. The Street Fire is fit with the same gear that is used on our Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance.

Product Features:

• Included 4-Pin Module
• The only value priced HEI with a full one year warranty
• Heavy duty distributor gear for durability
• Welded weight pins and heavy duty construction
• Adjustable vacuum advance helps tune it to each engine
• 21° of mechanical advance

The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:

• Simple and clean three wire installation
• Supplied w/An HEI Style Distributor Cap And Rotor
• Accepts Cap-A-Dapts
• Does not require an MSD Ignition Control
• CARB E.O. Approved
• Now includes built-in Rev Limiter
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear

Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:

• Direct Plug In Factory Replacement Plug And Play
• CNC Machined 6061 T6 Billet Aluminum Housing
• High Dielectric Strenght Thermoplastic Cap With Br
• 4 Topin Module With Dwell Control Triggers At 75 R
• Easy Access Fully Adjustable Mechanical Advance
• Adjustable Vacuum Advance
• Includes Performance Coil
• Fit non computerized vehicles

Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:

• Precision machined chromoly weights and center plate.
• Designed to eliminate erratic timing.
• Includes three sets of springs.
• Complete installation instructions make recurving your distributor easy.

Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:

• Rotor for Flame-Thrower cast distributors
• Replacement premium rotor with brass contact.

Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:

• Premium quality wire harness and capacitor.
• Insure good connection and “static free” operation.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

• Made from hi-performance 60 KV rated alkyd molding compound.
• Cap and rotor kits include nylon rotor hold-down screws.
• Flame-Thrower dust covers provide a larger air gap around the coil.

Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:

• Performance mechanical advance springs.

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

• Max stability for all RPM ranges
• Heavy duty for maximum energy transfer

Product Features:

• Heavy Duty Cap and Rotor Kit
• With Brass Inserts

LT1 fans have been searching for a cap that could deliver the performance of the LT1 and MSD is happy to bring it to them. Remember, changing the cap and rotor on this engine is no walk in the park. So when you do it, you want to make sure to install the best parts possible and the MSD Cap and Rotor deliver. The all-new cap housing is injection molded from a special DuPont material that provides extreme strength and high dielectric properties resulting in less chance of breakdown causing a misfire. The terminal paths are encased in a durable epoxy compound for even more protection. The rotor is also an all-new molded piece with a brass/stainless rotor tip design.

Product Features:

• Fits MSD LT1 Distributor PN 8381
• Injection molded housing from DuPont material
• Extreme strength; high dielectric properties
• Terminal paths encased in epoxy compound
• Brass/stainless steel rotor tip design
• Includes fresh air vacuum kit

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

• Fits MSD/GM V8 Distributors
• Made from high quality materials
• Brass terminals
• High dielectric properties

Chevrolet V8 engines with HEI/EST remount mount coil 8132 35362 applications include 1987-93 Cars and 1987-95 Trucks (Supersedes 60110).

Product Features:

• Features Protection From Arc Thru And Crossfire
• Features 60K V Rated Alkyd Compound

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

• Fits MSD LT1 Distributor PN[83811]
• Injection molded housing from DuPont material
• Extreme strength; high dielectric properties
• Terminal paths encased in epoxy compound
• Brass/stainless steel rotor tip design

Product Features:

• Heavy Duty Cap and Rotor Kit
• With Brass Inserts

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

• Fits stock distributor
• High quality material
• Brass terminals
• High dielectric properties

Product Features:

• Heavy Duty Cap and Rotor Kit
• With Brass Inserts

With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365.

Product Features:

• Designed w/performance in mind
• High quality; voltage insulating material
• Stainless Terminals
• High dielectric properties

The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:

• Stock GM HEI replacement distributor cap
• Red