1984 Chevrolet C30 Differentials

Essential 1984 Chevrolet C30 Differentials

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R14RMKH)

Differential Master Bearing Kit - Koyo

from

$163.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • GM 10.5 MASTER BRG & SEAL KIT 14BLT ’72-88, 410 & DOWN
See More

Yukon Gear – Bearing Race Driver (Part No.56014)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88510 race
  • All steel construction
See More

Pro-King – Differential Cover Gasket (Part No.743B303)

Differential Cover Gasket

from

$3.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)

Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size

from

$414.99
Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • U-bolt style
See More

Yukon Gear – High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 4.56 Ratio (Part No.24137)

High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 4.56 Ratio

from

$505.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a thick gear for a 4.10 & down carrier.

Product Features:
  • Fits GM 10.5″ GM 14 bolt truck
  • 10.50″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
  • Thick gear set for 4.11 and down carrier
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

Replacement Carrier Shim Kit For Dana 70 & 70HD

from

$126.99
Product Features:
  • Carrier shim kit
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 70HD, 4.56 & Up (Part No.20037)

Replacement Standard Open Carrier Case For Dana 70HD, 4.56 & Up

from

$454.99
Product Features:
  • Standard open carrier case
  • Does not include spider gears
  • Fits Dana Spicer 70HD
  • 4.56 and up ratio only
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Pro-King – Clutch Pack (Part No.717A119)

Clutch Pack

from

$211.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

FAG US – SHAFT SEAL (Part No.SS3147)

SHAFT SEAL

from

$32.49
SHAFT SEAL

Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

Differential Cover Gasket

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Motive Gear – Differential Gear Install Kit (Part No.GM10.5IK)

Differential Gear Install Kit

from

$54.99


Product Features:
  • MINI INST KIT GM 14BLT 10.5″ 4.10DN 1972-88
See More

Motive Gear – Differential Pinion Shim Kit (Part No.GM14SK)

Differential Pinion Shim Kit

from

$22.99


Product Features:
  • KIT SHIM GM 10.5 14 BLT
See More

Motive Gear – Differential Carrier Gear Kit (Part No.706058XR)

Differential Carrier Gear Kit

from

$138.99


Product Features:
  • KIT – INT. DANA 70 OPEN 35 SPL.
See More

Yukon Gear – Minor Install Kit For Dana 70-HD & Super-70 Differential (Part No.12028)

Minor Install Kit For Dana 70-HD & Super-70 Differential

from

$169.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 70HD
  • Included are a pinion seal, complete shim kit, marking compound and brush.
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles

from

$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
  • Smooth design
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

Replacement Baffle For Dana 70 & 70HD

from

$7.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down (Part No.32048)

Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down

from

$539.99
Yukon Performance steel spool for GM 14T with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck with 30 spline axles
  • 4.10 and down ratio only or 4.56 and up thick gears
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

14T Side Gear Thrust Washer

from

$7.99
14T side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Steel Cover For GM 10.5" 14 Bolt Truck (Part No.32345)

Steel Cover For GM 10.5" 14 Bolt Truck

from

$92.99
Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • Steel
See More

SKF – Wheel Bearing (Part No.K8000205983SKF)

Wheel Bearing

from

$60.23
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Differential Pinion Shim Kit

from

$6.49


Product Features:
  • DANA PRELOAD SHIMS (D60 & D70)
See More

1984 Chevrolet C30 Differentials

Maybe you’re in the middle of a full rebuild of that 1984 Chevrolet C30. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 185 different Differentials in our inventory ranging from $1.89 to $1,566.99. That means you can find the exact parts or products you need to keep that 1984 Chevrolet C30 running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Chevrolet C30. Valvoline, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1984 Chevrolet C30, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 172 reviews in this category, some of the top rated parts include Tapered Cone Wheel Bearing Assembly with 4.0 stars and Differential Cover Gasket with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1984 Chevrolet C30 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1984 Chevrolet C30 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Chevrolet C30 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C30 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1984 Chevrolet C30 Differentials

What are the most purchased Differentials for the 1984 Chevrolet C30?

Out of 185 Differentials for the 1984 Chevrolet C30, the most popular in our inventory are:
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1984 Chevrolet C30 Differentials?

Top-rated Differentials for your 1984 Chevrolet C30 based on customer reviews/ratings are:
Tapered Cone Wheel Bearing Assembly
from $16.99
(2)
Tapered Cone Wheel Bearing Assembly
“Worked sell”
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”
Differential Ring and Pinion
from $245.99
(1)
Differential Ring and Pinion
“You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”