1984 Avanti Car Parts

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

The Budge Ultra Car Cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra car covers are fully breathable, with ultra-sonically welded seams for added durability. This soft, nonabrasive material will not harm the surface of your vehicle. Designed for indoor and outdoor use, the Ultra Car Cover is designed to be breathable while it protects your vehicle. This improves airflow to reduce condensation and helps prevent mold and mildew. The Ultra cover features a full elastic hem and built-in grommets. This cover is gray in color and includes a storage bag and antenna patch. Designed to fit, this car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

• This car cover fits cars up to 200″ L x 60″ W x 51″ H.
• This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This car cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• Elasticized hem and sewn-in grommets for a secure fit

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

The WeatherTech All Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub zero weather. Our All Weather Floor Mats also have anti skid ridges to prevent shifting in your vehicle and come with a protective, non stick finish to make cleanup quick and easy. WeatherTech All Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:

• Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
• They Won t Curl, Crack Or Harden In Sub Zero Weather
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

• Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
• Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

The WeatherTech All Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub zero weather. Our All Weather Floor Mats also have anti skid ridges to prevent shifting in your vehicle and come with a protective, non stick finish to make cleanup quick and easy. WeatherTech All Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for a perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

The Budge Basic Car Cover offers single-layer, basic protection against dust and debris. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic Car Cover is constructed from a single-layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle?s exterior. Our Budge Basic Car Covers are light gray in color. Cover includes a storage bag and antenna patch. Designed to fit, this car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

• This car cover fits cars up to 200″ L x 60″ W x 51″ H.
• This car cover is suitable for indoor and short term outdoor storage
• This vehicle cover features double stitched seams for added durability
• A full elastic hem helps keep the car cover securely on your vehicle
• Convenient storage bag included

SPEEDO GEAR

SPEEDO GEAR

SPEEDO GEAR

SPEEDO GEAR

SPEEDO GEAR

SPEEDO GEAR

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
• NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
• SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
• STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
• Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
• Raises combustion sealing force to roughly three times that of standard head gaskets.
• Steel wire rings for the greatest combustion seal strength.
• Not intended for use in emission controlled vehicles.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
• Not intended for use in emission controlled vehicles.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Die cut silicone rubber gaskets conform to out-of-flat covers
• Great for on-again/off-again situations
• Not intended for use in emission controlled vehicles.

Product Features:

• Designed for Optimum Torque and Acceleration
• Maximum Performance From Idle through Mid-Range
• Matched to Edelbrock Performer Intakes
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s
• Take The Guesswork Out Of Camshaft Selection

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:

• Good blend of efficiency and performance.
• Perfect choice for performance street rebuilds.
• Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:

• Based on Performer RPM-Series with Unique Air Gap
• Air Gap Cooler and Denser Mixture for More Power
• Designed for 1500 to 6500 RPM Street-Driven Power
• Dual-Plane High-Rise Intake
• For Square Bore Carburetors Only

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
• NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
• SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
• STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Steel core gasket construction
• Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
• Not intended for use in emission controlled vehicles.

Product Features:

• For Idle to 5500 RPM Street-Driven Performance
• Dual-Plane Low-Rise Intake w/180 Deg Firing Order
• Patented Runner Design Ensures Broad Torque Curve
• Excellent Throttle Response and Mid-Range Power
• 50-State Street Legal if Correct Carburetor Used
• Accepts Late-Model Choke; Waterneck; and HEI
• Accepts A/C And Alternator
• Accepts Exhaust Heated Chokes and Accepts EGR

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:

• New Precision Pump Drive Tube
• Pressure Tested
• Fully Balanced
• Needle Thrust Bearing
• New Thrust Washer

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
• With steel core to provide ultimate excellent blowout resistance.
• Not intended for use in emission controlled vehicles.

Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro

Product Features:

• Idle-5500 RPM Range
• Dual Plane Type-4150 Style Flange
• 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
• Satin Finish
• Non-EGR W/ Oil Fill Tube

Edelbrock part #22085 Rollin’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin’ Thunde

Product Features:

• Iron Camshaft Material
• 0.462 in. Intake Valve Lift with Factory Rocker Arm Ratio
• Roller Lifter Type
• Valve Springs Required
• Assembly Lubricant Included

HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine
• Dual Pattern Drive Lugs
• New Turbine Hub
• New Springs/Rollers In Stator

HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:

• Polished Version Of Edelbrock PN[7501]
• Polish is Hand-Buffed for Brilliant Shine
• Based on Performer RPM-Series with Unique Air Gap
• Air Gap Cooler and Denser Mixture for More Power
• Designed for 1500 to 6500 RPM Street-Driven Power
• Produces Incredible Top-End Horsepower
• Retains Good Throttle Response and Acceleration
• Larger Plenum and Runners Maximizes Other Upgrades

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

• 3400-3800 RPM
• Small And Big Blocks
• Serious Performance
• Furnace Brazed
• Fully Balanced

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:

• Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
• Best with aftermarket converters and more rear gear.
• Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

Product Features:

• Polished Version Of Edelbrock PN[2701]
• Polish is Hand-Buffed for Brilliant Shine
• Maximizes Performance with Edelbrock Carburetors
• Maximizes Peak Torque Around 3500 RPM
• Excellent Throttle Response and Mid-Range Power
• Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
• For Idle to 5500 RPM Street-Driven Performance
• Dual-Plane Low-Rise Intake w/180 deg. Firing Order

HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine

Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:

• Idle-5500 RPM Range
• Dual Plane Type-4150 Style Flange
• 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
• Black Powder Coated Finish
• Non-EGR W/ Oil Fill Tube

Product Features:

• For Idle to 5500 RPM Street-Driven Performance
• Dual-Plane Low-Rise Intake w/180 Deg Firing Order
• Patented Runner Design Ensures Broad Torque Curve
• Excellent Throttle Response and Mid-Range Power
• 50-State Street Legal if Correct Carburetor Used
• Accepts Late-Model Choke; Waterneck; and HEI
• Accepts A/C And Alternator
• Accepts Exhaust Heated Chokes and Accepts EGR

Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:

• Idle-5500 RPM Range
• Dual Plane Type-4150 Style Flange
• 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
• Black Powder Coated Finish
• Non-EGR

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

• Excellent performance in street carbureted applications.
• More vacuum allows an increase in duration for improved performance and assists power brakes.
• Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
• Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
• Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
• Not intended for use in emission controlled vehicles.
• Not intended for use in emission controlled vehicles.