1983 Toyota Pickup Performance and Racing Products
Find Your Specific 1983 Toyota Pickup Performance and Racing Products
Below you will find various in-demand Toyota Performance and Racing Products, components and accessories for your 1983 Pickup. Advance Auto Parts has popular Pickup parts like Performance Ignition Products, Performance Suspension Products, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Pickup model years including
1987,
1988,
1989,
1990,
1991,
1992,
1993,
1994,
1995 and more. Select a category of 1983 Toyota Pickup Performance and Racing Products below and start saving instantly.
Popular 1983 Toyota Pickup Performance and Racing Products Categories
Essential Performance and Racing Products for 1983 Toyota Pickups
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Strut Rod Bushing Set (Part No.8.7103R)
from
$30.49
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Wire Set; Super Conductor; 4-cyl.; 22R (Part No.31949)
from
$114.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
Energy Suspension – Shackle Bushing Set (Part No.8.2109R)
Energy Suspension – Shackle Bushing Set (Part No.8.2104G)
Energy Suspension – Hyper-Flex System (Part No.8.18102R)
from
$214.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Torsion Arm Bushing (Part No.8.7101G)
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Energy Suspension – Sway Bar Bushing Set (Part No.8.5101G)
from
$23.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5101R)
from
$23.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5123R)
from
$51.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Russell – Street Legal (Part No.695500)
from
$82.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Energy Suspension – Body Mount Set (Part No.8.4101R)
from
$94.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.8.4101G)
from
$94.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Sway Bar Bushing Set (Part No.8.5105R)
from
$45.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5103G)
from
$45.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5106R)
from
$38.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5102R)
from
$23.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Upgrade your 1983 Toyota Pickup with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1983 Toyota Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Performance and Racing Products are key to keeping your Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Performance and Racing Products for the 1983 Toyota Pickup, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Suspension Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1983 Toyota Pickup at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $5.99 to $579.99, with
an average price of $98.51.
Our 26 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 1983 Toyota Pickup without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Toyota Pickup, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, K&N, Energy Suspension, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
K&N and Energy Suspension also bring quality to the table, with Performance and Racing Products available starting at $5.99, and at an average 4.8 stars rating.
With 782 customer reviews and counting, our 1983 Toyota Pickup Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1983 Toyota Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your Pickup in top shape, all in one place.
Start shopping confidently below for your 1983 Toyota Pickup!
Best-Selling Performance Ignition Products for 1983 Toyota Pickups
Enhance the driving experience in your Toyota with 3 quality Performance Ignition Product components, starting at $95.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Wire Set; Super Conductor; 4-cyl.; 22R (Part No.31949)
from
$114.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Most Popular 1983 Toyota Pickup Performance Suspension Products
Customize your Toyota with 5 Performance Suspension Products products
like Performance Chassis Bushing Kits,
Performance Strut Rods and Kits, and
Performance Shackle Bushings, all
priced under $214.99.
Energy Suspension – Shackle Bushing Set (Part No.8.2109R)
Energy Suspension – Hyper-Flex System (Part No.8.18102R)
from
$214.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Strut Rod Bushing Set (Part No.8.7103R)
from
$30.49
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Energy Suspension – Torsion Arm Bushing (Part No.8.7101G)
Energy Suspension – Shackle Bushing Set (Part No.8.2104G)
Top Picks for 1983 Toyota Pickup Performance Steering Products
Upgrade Toyota Pickups with top-quality Performance Steering Products parts, including 11 OEM and aftermarket selections for your 1983 model.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Body Mount Set (Part No.8.4101R)
from
$94.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.8.4101G)
from
$94.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Sway Bar Bushing Set (Part No.8.5104R)
from
$45.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5101R)
from
$23.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5103G)
from
$45.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5101G)
from
$23.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5102G)
from
$23.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.8.5102R)
from
$23.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
In-Demand Performance Oil Filters for 1983 Toyota Pickups
Select from 2 premium Performance Oil Filters parts for your 1983 Toyota Pickup, with prices ranging from $17.99 to $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Most Sold 1983 Toyota Pickup Performance Engines
Explore our best-selling Toyota parts for the 1983 Pickup among 3 OEM and aftermarket options starting from $579.99.
Competition Cams – High Energy 214/214 Solid Cam for Toyota 20R/22R 4 Cylinder (Part No.87-119-6)
from
$579.99
High Energy 214/214 Solid Cam for Toyota 20R/22R 4 Cylinder
Competition Cams – High Energy 214/214 Solid Cam for Toyota 20R/22R 4 Cylinder (Part No.87-123-6)
from
$579.99
High Energy 214/214 Solid Cam for Toyota 20R/22R 4 Cylinder
Competition Cams – MAG 242/242SLD20/22R (Part No.87-131-6)
from
$579.99
MAG 242/242SLD20/22R
Top-Rated Performance and Racing Products Brands For Your 1983 Toyota Pickup
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1983 Toyota Pickups. Below you’ll find some of our best rated Performance and Racing Products from Mallory, K&N, and Energy Suspension, and more. Performance and Racing Products from these brands that fit a 1983 Pickup start at just $5.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1983 Toyota Pickup Performance and Racing Products
When it comes to maintaining or upgrading your 1983 Toyota Pickup, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1983 Toyota Pickup. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular K&N 1983 Toyota Pickup Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1983 Toyota Pickup owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1983 Pickup, Advance Auto Parts carries a full inventory of 2 K&N Performance and Racing Products. Plus you will be keeping your Toyota in peak condition while saving money because prices on these K&N Performance and Racing Products range up to $17.99, plus, with more than 251 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$17.99
(120)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“All good, right filter for 1973 volvo.”
from
$17.99
(131)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“Great”
FAQs for 1983 Toyota Pickup Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1983 Toyota Pickups?
Out of 26 Performance and Racing Products that fit 1983 Toyota Pickups, the following parts are the top sellers:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Tie Rod Dust Boot (22906873) – $6.29
What’s the price range for 1983 Toyota Pickup Performance and Racing Products?
Performance and Racing Product prices for the 1983 Toyota Pickup start at $5.99 and go up to $579.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1983 Toyota Pickup?
The average price for Performance and Racing Products for the 1983 Toyota Pickup is $98.51. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Toyota Pickup model years?
What are the cheapest Performance and Racing Products for my 1983 Toyota Pickup?
The cheapest 1983 Toyota Pickup Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Tie Rod Dust Boot (22906873) – $6.29
- Shackle Bushing Set (22906346) – $14.49
- Shackle Bushing Set (22906335) – $14.79
What are the top-rated Performance and Racing Products that fit the 1983 Toyota Pickup?
Out of 782 reviews by customers, our 1983 Toyota Pickup Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1983 Toyota Pickup and their top-rated products:
- Performance Oil Filters
What types of Performance and Racing Products do you sell for my 1983 Toyota Pickup?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1983 Toyota Pickup:
Can I get help with 1983 Toyota Pickup Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Performance and Racing Products and more.
What is your return policy for Toyota Pickup Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Toyota Pickup Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
